Author Topic: Anodising (VERY Pic Heavy) (Read 65050 times)

anodiser_chick · « **on:** September 27, 2014, 02:38 PM »

Hey folkes.

I know I have a sticky but I have spoken to Griff and it is going to be replaced with this one as I have now done so much more BMX stuff, I figure photo's of those may be a better option than motorbike and mountain bike stuff. So... here are some photos of my recent stuff. Enjoy

You guys have all been absolutely superb customers and without fail my most sent in so thank you!!!

If you have had any work done by me and feel the need to post/show it off if you're happy with it... then I reckon you should most definitely do that...... In this thread

**** I have some pretty interesting new techniques im trying over the next two weeks that I have had to order in special and expensive dyes in for. Keep a close eye on this thread.... its going to be good!! and unexpected i think. ****

I'll start with a couple that some of you may have already seen. Then go onto before and after jobs

Retrodan72 · « **Reply #1 on:** September 27, 2014, 02:42 PM »

Nice one Jay, those rims look mint.

MartyC · « **Reply #2 on:** September 27, 2014, 02:42 PM »

Do you chemically brighten the alloy before anodising?

anodiser_chick · « **Reply #3 on:** September 27, 2014, 02:45 PM »

These were MENTAL!!! 8 hours it took to polish these, I even took them home with me. You can still see polishing lines after anodising but there was nothing i could do as it had been polished to near death!

Pic order is:

Stripped
Polished
Anodised

anodiser_chick · « **Reply #4 on:** September 27, 2014, 02:47 PM »

Quote from: Retrodan72 on September 27, 2014, 02:42 PM

Nice one Jay, those rims look mint.

Thank you, They belong to Chapperz (think that's spelt right)

Quote from: MartyC on September 27, 2014, 02:42 PM

Do you chemically brighten the alloy before anodising?

Yes, If the required finish isn't 'matte' and its HE30 aluminium.

anodiser_chick · « **Reply #5 on:** September 27, 2014, 02:54 PM »

BLueeeeeeeeeeeeeeee

anodiser_chick · « **Reply #6 on:** September 27, 2014, 02:59 PM »

Some black I did for a Turnip (Mr Foster)

anodiser_chick · « **Reply #7 on:** September 27, 2014, 03:02 PM »

Another almost dead project... (Thanks Paul)

factory pilot · « **Reply #8 on:** September 27, 2014, 03:03 PM »

Lovely stuff! I've seen the red calipers you did for Andy(dttdb) and they are real nice ... Top work and what us Radsters have needed for ages!

anodiser_chick · « **Reply #9 on:** September 27, 2014, 03:06 PM »

Random bits

anodiser_chick · « **Reply #10 on:** September 27, 2014, 03:10 PM »

Some colour sample things...

anodiser_chick · « **Reply #11 on:** September 27, 2014, 03:14 PM »

Quote from: factory pilot on September 27, 2014, 03:03 PM

Lovely stuff! I've seen the red calipers you did for Andy(dttdb) and they are real nice ... Top work and what us Radsters have needed for ages!

Thank you very much!! Always feel the love from you lot for my work.... It's why I keep coming back

HUTCHMAN · « **Reply #12 on:** September 27, 2014, 03:53 PM »

where abouts are you based Jay ?

anodiser_chick · « **Reply #13 on:** September 27, 2014, 04:11 PM »

Quote from: HUTCHMAN on September 27, 2014, 03:53 PM

where abouts are you based Jay ?

I'm in Sandhurst, Berkshire. But everyone sends their stuff in by post or courier. You're welcome to drop it in if you're close enough

HUTCHMAN · « **Reply #14 on:** September 27, 2014, 04:53 PM »

Quote from: anodiser_chick on September 27, 2014, 04:11 PM

Quote from: HUTCHMAN on September 27, 2014, 03:53 PM
where abouts are you based Jay ?

I'm in Sandhurst, Berkshire. But everyone sends their stuff in by post or courier. You're welcome to drop it in if you're close enough

that's cool... live in Henley, work in Reading.. so not too far. Good to know, thanks

anodiser_chick · « **Reply #15 on:** September 27, 2014, 05:00 PM »

Ah cool. I ride through Henley all the time on my motorbike. We live in Bracknell. People drop stuff to us at home a lot too

HUTCHMAN · « **Reply #16 on:** September 27, 2014, 05:04 PM »

Think I'm out in the van this coming week.. no doubt be down to Farnborough at least 3 days .. what's your work address?.. need a power disc anno in black.... if you don't mind me asking!

meticulous · « **Reply #17 on:** September 27, 2014, 05:08 PM »

looks like you got that araya red bang-on jay....

meticulous · « **Reply #18 on:** September 27, 2014, 05:12 PM »

and the blue....

anodiser_chick · « **Reply #19 on:** September 27, 2014, 05:19 PM »

Quote from: HUTCHMAN on September 27, 2014, 05:04 PM

Think I'm out in the van this coming week.. no doubt be down to Farnborough at least 3 days .. what's your work address?.. need a power disc anno in black.... if you don't mind me asking!

I'll PM you in a sec. No worries about asking at all. I don't mind.

Quote from: meticulous on September 27, 2014, 05:08 PM

looks like you got that araya red bang-on jay....

Really? I didn't know. Never seen any of if so just guessed haha

griff · « **Reply #20 on:** September 27, 2014, 07:31 PM »

Anyone else looking at all these shiny goodies and thinking 'I wish I had something to get anodised...'

Great work Jay

CustardLips · « **Reply #21 on:** September 28, 2014, 12:03 AM »

Got this back from Jay the other day.

She's done a top job. I'm well pleased.

miggsy · « **Reply #22 on:** September 28, 2014, 07:37 PM »

Quote from: griff on September 27, 2014, 07:31 PM

Anyone else looking at all these shiny goodies and thinking 'I wish I had something to get anodised...'

Great work Jay

thinking i might just buy something to get done lol

anodiser_chick · « **Reply #23 on:** September 28, 2014, 07:41 PM »

Quote from: miggsy on September 28, 2014, 07:37 PM

Quote from: griff on September 27, 2014, 07:31 PM
Anyone else looking at all these shiny goodies and thinking 'I wish I had something to get anodised...'

Great work Jay

thinking i might just buy something to get done lol

Thank you, Griff!!

I think you should all do that!!

McQUEEN · « **Reply #24 on:** September 28, 2014, 08:31 PM »

Here's some HP48's that Jay stripped and reanodised, along with a peregrine seat clamp. All good examples of some great work.