opc's on midschool & now general morales build thread *** FINALLY FINISHED ***

[chubby]

Awsome
If I di end up going with the Bfr wheels from bmx city hopefully they'll build em up 😉
If you come across owt else that I need please give mee a shout Dan 👍

sent from an mk shitter

[nosepickben]

Dead right. Primo axles are 22mm.

Right so a funky a funk 36-39 sprocket, i need 14mm rear hub for the morales so will I be able to use the larger 30mm rear cog Acs or odyssey 13-15t

Have I finally got it in my thick head right 

A 14mm axled hub may have either freewheel thread size. 30mm thread is the smaller of the two and will take 13-15t free wheels. If you want to run a 36, go for a 13 rear. If you run 39 then  use a 14 rear.

[chubby]

Wotcha midschoolers primo powerbite have arrived from wini , not ever having 3pc before I'm bit stumped on the bb situation 
The morales had a normal loose bearing bb on the dna cranks which all screwed together same as a normal opc
Need a sealed bb suitable for the primo any ideas would be great. Links to the right thing even better 

Cheers fellas 

[Dannywhac]

Hold off again me old mukka - I might have a spare US Primo BB as on a bike I got the Powerbite cranks arms were fooked. Will have a butchers when I look for that hub 

If I fail, cheapest I could find:

http://www.ebay.co.uk/itm/like/141360634600?limghlpsr=true&hlpv=2&ops=true&viphx=1&hlpht=true&lpid=108&device=c&adtype=pla&crdt=0&ff3=1&ff11=ICEP3.0.0&ff12=67&ff13=80&ff14=108

[chubby]

Cheers Dan, Spanish, usa, mid bb's !!!!!! All too much for me today 😝

sent from an mk shitter

[chubby]

Help time again midschool kids 
Scored a nice dinky stem earlier on it's a 1 1/8th  gonna need a 1" conversion shaft for the kore forks. Really need one with a potts bolt, had a poke about & seem to be plenty of normal ones with a recessed allen head bolt fixing but failed to find a potts one so far......

Any of you guys know of a potts modded conversion shaft or a potts bolt that can be used with one
At a push I've got one of them universal potts bolt (hex head) that I could cut down & use a washer on the head but it sounds a bit bodgy (not that it's worried me before  )

Thanks yet again fellas & I promise to stop bothering you all soon 

[oldschoolace]

Rich, i imagine those convertors would be easy to bore out for a potts mod bolt   

[chubby]

Rich, i imagine those convertors would be easy to bore out for a potts mod bolt   

Forgot the fookin things were bigger 

[bobbbbsy]

opc s came back at a point after being frowned upon for years. very much a mid skool thing . even generic bikes into early 00s..

Noooooo they didn't - flatlanders used em, and generic bikes throughout time used em (and still do) but the majority of the mid to late 90's every bugger that rode anything other than a paper delivery round had a 3 piece crank. They became cheap enough by then for peeps to afford.

well just check out loads of midschool completes , mongoose , gt , dyno -etc etc .. i never said good bikes or pimped out bikes. paperboys are RAD 

[brakedancer]

why are you not sticking a normal shafted stem in it ...

what your doing sounds a bit bodgy ...

no offence ,,,

[chubby]

why are you not sticking a normal shafted stem in it ...

what your doing sounds a bit bodgy ...

no offence ,,,

None taken mr Dancer

Didn't like most 9f the 1"mid stems & ended up going for something really rare & different  in 1 18th
Just cos I like the look of it 

[brakedancer]

ok dude 

so when do you get the frame back....?

maybe a profile chainring if you get stuck there quite universal.....

[chubby]

When uncy Dans sorted it 😉😉
Do need a chainwheel 36-39t
If you've got one going 👍

sent from an mk shitter

[brakedancer]

here yo go...

http://www.ebay.co.uk/itm/Profile-Chrome-36T-Chain-ring-90s-Mid-School-BMX-Not-Primo-/231320775553?

 

[chubby]

here yo go...

http://www.ebay.co.uk/itm/Profile-Chrome-36T-Chain-ring-90s-Mid-School-BMX-Not-Primo-/231320775553?

 

Saw tbat bugger looks  it worn out to me 

[Dannywhac]

Agreed - looks like it's had a phat chain on it

Profile Whippets more of a street/dirt sprocket tbh - W@nkstanleys do a Profile SS 39T for 28 quid.

[chubby]

😎😎😎
Best look wehn soberer

sent from an mk shitter

[gary4130]

i think you should put a freecoaster on the back wheel mate -it's a flat bike afterall -then its going to be easier for the gearing -as there loads of cogs available in different sizes 

[chubby]

i think you should put a freecoster on the back wheel mate -it's a flat bike afterall -then its going to be easier for the gearing -as there loads of cogs available in different sizes 

Something else to confuse me 

I'll have a look into it bud 

[chubby]

Just sorted the wheels from Dan @ bmxcity, really helpful bloke & ended up with the BFR'S with stainless spokes & sealed prolite bubs
14t freewheel & blingy chrome chain delivered for 60ish notes 
May not be for the purists amongst you but gone for things I like the look of more than anything else 
Viynal arrived from the states for the decals & is off to Delboy, frames with Dan, tyres still at clints 
Need chrome gyro, rear brake cos I fancy a 990 or something odder (chrome) still need a groovy chainwheel ,some of that holographic/cosmic brake cable & a 1 1/8th to 1" stem adapter 


So come on guy's raid your stashes & hook me up

Ps nows a good time as I'm drinking 

[oldschoolace]

Ooops sorry bud, forgot all about those tyres. Will get em out to you 

[chubby]

Ooops sorry bud, forgot all about those tyres. Will get em out to you 

 
Whenever Clint 

[chubby]

 forgot I'm still struggling for big fook off pegs too. Madder the better 

[chubby]

Del came up trumps again !!!!!
Think they look fookin ace 😉😉

[oldschoolace]

Looking good Rich