Dinky threaded bb shenanigans???

[oldschoolace]

Ow do gents 

Finally snagged one of these and looking for advice re. the dinky road bike styleee bb. Whats available bb set wise and suitable cranks?

Cheers 

[NORTY40]

Any square taper crank will fit it Clint , ie Sugino GT , super maxy , maxy cross , suntour vx etc 

[oldschoolace]

Cheers Joff, Im guessing 1 piece cranks are a no no?
Any ideas on bb sets, do i just need to match the bb diameter and width?

[john4130]

any 3 piece cranks should fit with a matching euro bottom bracket. no chance of a one piece crank fitting though.

[Dark Diggler]

Measure the bb width, it will be 68 or 73, on the off chance it's 70, you'll need an Italian threaded bb but it's unlikely
Then you need the spindle width, most single speed track bikes use a 108mm width but some use 110 and campagnolo 111mm

So, 68/108 would be a common square taper bb for single speed.

This might help for cross reference
http://www.velodromeshop.net/index.php?p=catalog&parent=15&pg=1

[snoopy72]

I would fit shimano tourneys , they would look sweet 

[oldschoolace]

Cheers gents 

Just need to sort headset sizes out now 
Its got a 30mm internal diameter headtube so im guessing i can get some tasty campag track/road bike headset?