gfxgfx
 
logo
 
gfx gfx
gfx
975804 Posts in 138943 Topics by 6363 Members - Latest Member: V6 DOW November 23, 2024, 02:24 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Please help with Skyway Tuff II axle thread info!
gfx
gfxgfx
 

Author Topic: Please help with Skyway Tuff II axle thread info!  (Read 2911 times)

0 Members and 1 Guest are viewing this topic.

Offline Old School

  • Curb Endo
  • **
  • Posts: 93
  • Rated:
Please help with Skyway Tuff II axle thread info!
« on: October 08, 2015, 06:33 PM »
Hi again everyone!
Sorry to pester but I'm right at the end of my build and I have a couple of snags!
The first is being dealt with in another thread.

The second is fitting old school skinny trick pegs on my Skyway axles!
Here are photos so u know what the hell I'm talking about!!







Question A: the dropout on the freewheel side, in the 1st & 2nd photos, is bent in a bit now the nuts are tightened - should I be using more spacers between the freewheel and the dropout so that the dropout is straight?

Question B: the skinny pegs I've got don't screw all the way down to the outer drop out nut on both sides.
So presumably I'll need more spacers?

Question C: where do I get the spacers or what TPi nuts do I need?

Cheers guys :daumenhoch:




Sent from my iPhone using Tapatalk

Offline monteryroom

  • Curb Endo
  • **
  • Posts: 78
  • Rated:
Re: Please help with Skyway Tuff II axle thread info!
« Reply #1 on: October 11, 2015, 09:15 PM »
i would take some length off the axle. do it with the nut on so it retraces the thread on the way off.
we used to use the screw on pegs instead of axle nuts.  thread them all the way on, flush against the drop.
you could use chain tensioners under the pegs, too.

Offline monteryroom

  • Curb Endo
  • **
  • Posts: 78
  • Rated:
Re: Please help with Skyway Tuff II axle thread info!
« Reply #2 on: October 11, 2015, 09:20 PM »
http://bmxmuseum.com/forums/viewtopic.php?id=242071
^^some good info here^^ from the man himself, planet bmx: (colored tuffs store).

"95% of all Tuff Wheels out there,
 including all of my colored Tuff Wheels that I've had made since 2004 are a 26tpi / 24tpi combo.  The front is a 26tpi, and the rear is a 24tpi". .

Offline 58 delray

  • Site Supporter
  • 900 Air
  • *
  • Posts: 3483
  • Rated:
Re: Please help with Skyway Tuff II axle thread info!
« Reply #3 on: October 12, 2015, 11:06 AM »
in answer to question "A" yes you should space the axle/wheel to the frame and not pinch the frame in  :daumenhoch:

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Please help with Skyway Tuff II axle thread info!
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal