Author Topic: bolts for alloy tuffs.. rear size and where from?? (Read 735 times)

spadey99 · « **on:** February 25, 2014, 10:26 AM »

Guys I need some bolts to replace a hub on a rear alloy tuff. . What size length etc do I need and anyone got any links??

Steve

Jaan · « **Reply #1 on:** February 25, 2014, 11:12 AM »

Here you go Steve. Just don't spend all your time drooling over the 1st Gens...

http://mauricemeyer.net/cgi/mm.pl?datafile=../general/BMX.txt&page=BMX/Colored_Graphite_Tuffs

Actually, come to think of it - is bolt length in that article?

spadey99 · « **Reply #2 on:** February 25, 2014, 11:44 AM »

Cheers chris will have a read later

Howser · « **Reply #3 on:** February 25, 2014, 07:01 PM »

Didn't bendycat have a thread on this and does axle replacements kits? Worth dropping him a pm to see if he can help out.

Cheers

spadey99 · « **Reply #4 on:** February 25, 2014, 08:35 PM »

cheers mate, I think Bendy did the spindles... got some off him....

Jaan · « **Reply #5 on:** February 25, 2014, 08:41 PM »

You can still pick up Skyway hub replacement kits Steve but thats probably a more expensive way of fixing them. Can't you measure the original rivets...?

Bfellows · « **Reply #6 on:** February 25, 2014, 09:09 PM »

You're in luck - they are 4.2mm x 64.43 which makes me think they are most likely imperial........ 5/32 x 2 and 17/32...... Or just buy 4 x 65mm and be done with it. Ere to help......

spadey99 · « **Reply #7 on:** February 25, 2014, 09:28 PM »

Bert I love you bro

so what would I search on e bay?

? Im useless fellas....

Bfellows · « **Reply #8 on:** February 25, 2014, 09:40 PM »

Search for M4 pan head bolts - if memory serves, you can't get 65mm, so get 70mm and trim down. You need pan heads so the chain clears them when fitted.