brake lug help

[gib66]

help i need a new 990 mount
i have just got new frame and one of the removable mounts is missing out the box are they all the same ie can i just buy one from somewhere or even better anyone got one or matching pair

frame doesnt have warranty either asit is new but a year old from someone who bought it but never built it

[Dannywhac]

They're not all the same fella - Fit one's will fit S&M ones etc, but won;t fit other companies.

What frame is it?

[gib66]

booo supercross passion dirt frame

[gib66]

the screw in part to go in the frame is as near as 12mm if this helps

[rodriguez]

option a email supercross and they might send you some

http://supercrossbmx.com/

option b buy some after market ones and try them

http://www.alansbmx.com/8082/products/hoffman_bikes_removable_brake_mount_kit.aspx?origin=pla?kwd=&gclid=CKz_6eS_2bwCFSbnwgodpBwAfA

check this out, probably c or d you are after.

http://www.stolenbmx.com/brake-mounts

option c take frame to a bmx shop and try some

[Dannywhac]

Don't buy any of them listed lugs above - some lugs also come with pass through bolts and not threaded bases like the ones in the links above, and by the looks yours has curved mounts which non of the above will fit.

Deffo find out which type you need first - email Supercross and ask em.

[rodriguez]

Don't buy any of them listed lugs above - some lugs also come with pass through bolts and not threaded bases like the ones in the links above, and by the looks yours has curved mounts which non of the above will fit.

Deffo find out which type you need first - email Supercross and ask em.

That's what I'd do   

[oldtired]

was it the black one on ebay Greg?  if so , been looking at it deciding weather or not to hit the bin button ,   


 Ask Ed to send a pic of his , i think its the same mounting on his SC Extention ,  i think  its an odd mounting, the boss screws into the frame rather than the bolt holding it in place ,

[Dannywhac]

It looks to all intent that they're similar to the S&M/Fit lugs - curved plate with a bolt through:

Your Frame:

[ Attachment: You are not allowed to view attachments ]

S&M/Fit Lugs:

[ Attachment: You are not allowed to view attachments ]

But deffo find out from Supercross which one's they are - it'll save ya a twenty quid mistake 

[oldtired]

i think the SC  catalog shows the curved bit separate and the boss is threaded into the frame so a normal/stock  mounting bolt can be used , could be a pre production design though. 

[gib66]

Boss is threaded with curved washer

[oldtired]

looks like Supercross will be the best bet then Greg   

the boss will probs be standard one,  i think they are either 8mm or 10mm thread  but the washer will be the tricky bit ,

[gib66]

I have the washer