Author Topic: Indoor mini mini ramp building (Read 2285 times)

ED209 · « **on:** February 11, 2014, 08:52 AM »

So I have a room with a nice high roof .... 6m x 4.7m.

Is that enough space to build anything rideable?

was thinking of going to vert actually up the wall one side and a 3ft high side with platform the other.

Any thoughts welcome

pickle · « **Reply #1 on:** February 11, 2014, 08:57 AM »

I'd just go mini ramp Ed instead of vert as you can do more

Bru · « **Reply #2 on:** February 11, 2014, 08:59 AM »

No enough room Rob

Bru

pickle · « **Reply #3 on:** February 11, 2014, 09:00 AM »

So when are we coming up to help build it?

ED209 · « **Reply #4 on:** February 11, 2014, 09:19 AM »

Quote from: Bru on February 11, 2014, 08:59 AM

No enough room Rob

Bru

you reckon its too small Bru?

Bru · « **Reply #5 on:** February 11, 2014, 09:22 AM »

For a mini yes..

ED209 · « **Reply #6 on:** February 11, 2014, 09:27 AM »

even a mini mini just to have a laugh on... 2 1/2 ft high?

15ft wide ... 20ft length ... so 5ft for tranny... 2ft platforms ...6 ft flat ... theres gotta be fun to be had

come on man ... lets get creative

just for lip tricks, shits and giggles

OllyHall · « **Reply #7 on:** February 11, 2014, 09:38 AM »

That bit of fun will cost you 2k + and will be crap lol perfect for scooters tho! Maybe a side business

ED209 · « **Reply #8 on:** February 11, 2014, 09:39 AM »

Quote from: OllyHall on February 11, 2014, 09:38 AM

That bit of fun will cost you 2k + and will be crap lol perfect for scooters tho! Maybe a side business

thats right ... pi$$ on my dreams you bitter old trout

OllyHall · « **Reply #9 on:** February 11, 2014, 10:14 AM »

anytime edy

aerostylie · « **Reply #10 on:** February 11, 2014, 02:11 PM »

Have been thinking about building one of those small trick ramps like bitd they used to show in mags/books how to build, just to do kickturns, ramp stalls......and rollbacks

Got the dimensions but never been anygood with wood (ooo err), banging and screwing Im fine!

Spen69 · « **Reply #11 on:** February 11, 2014, 02:34 PM »

Ed, bring your tape-measure to the Boardroom in a week or so as that looks like the same sort of dimensions as the little practice ramp which is good for nothing on a bike I'd say $:-\$

Gnarlyscoots · « **Reply #12 on:** February 11, 2014, 03:00 PM »

Ed, all you need is right here mate >>

ED209 · « **Reply #13 on:** February 11, 2014, 04:47 PM »

Munny Mark is away with the plans already :-)

griff · « **Reply #14 on:** February 11, 2014, 05:36 PM »

Quote from: Spen69 on February 11, 2014, 02:34 PM

Ed, bring your tape-measure to the Boardroom in a week or so as that looks like the same sort of dimensions as the little practice ramp which is good for nothing on a bike I'd say $:-\$

If Spen's saying it's too small, you might want to think carefully about it

Badbaldie · « **Reply #15 on:** February 11, 2014, 05:47 PM »

Quote from: griff on February 11, 2014, 05:36 PM

Quote from: Spen69 on February 11, 2014, 02:34 PM
Ed, bring your tape-measure to the Boardroom in a week or so as that looks like the same sort of dimensions as the little practice ramp which is good for nothing on a bike I'd say $:-\$

If Spen's saying it's too small, you might want to think carefully about it

Griff defo has a good point here Ed

ED209 · « **Reply #16 on:** February 11, 2014, 06:01 PM »

Quote from: Badbaldie on February 11, 2014, 05:47 PM

Quote from: griff on February 11, 2014, 05:36 PM
Quote from: Spen69 on February 11, 2014, 02:34 PM
Ed, bring your tape-measure to the Boardroom in a week or so as that looks like the same sort of dimensions as the little practice ramp which is good for nothing on a bike I'd say $:-\$

If Spen's saying it's too small, you might want to think carefully about it

Griff defo has a good point here Ed

Shit... thats a very good point. He thinks the bathroom sink is an epic bowl

Bru · « **Reply #17 on:** February 11, 2014, 07:18 PM »

To build anything that is going to be any good for a bike you need to be 4ft high minimum and a 4ft platform either end or a 3ft and 5ft would be my preference is space is tight (space no issue do a 4ft & 6ft platform)...

You need a minimum of 8ft of true flat bottom on a 4ft high mini... then say 6.5ft tran, so if you take the bare minimum you will need 9/10m. In width 16ft minimum but 20ft would be better or even 24ft if you have the space.

Last of all deep pockets it will cost much more than you think!

Bru

ED209 · « **Reply #18 on:** February 11, 2014, 07:32 PM »

this looks fun tho Bru ... just for learning disasters / tyretaps / footplants :-)

Bru · « **Reply #19 on:** February 11, 2014, 07:41 PM »

Not much room on them platforms for disasters and tyretaps! If one platform was bigger maybe but it's going to tight on a bike IMO.

Sorry bud not trying to piss on your chips, it's a great idea and would be fab to have something inside just don't want you to spend a shit load of money and it not be usable. If I can help in anyway and I know I can speak for Rob too then just ask buddy.. Don't buy any timber either until you speak to us

Bru

ED209 · « **Reply #20 on:** February 11, 2014, 09:38 PM »

Quote from: Bru on February 11, 2014, 07:41 PM

Not much room on them platforms for disasters and tyretaps! If one platform was bigger maybe but it's going to tight on a bike IMO.

Sorry bud not trying to piss on your chips, it's a great idea and would be fab to have something inside just don't want you to spend a shit load of money and it not be usable. If I can help in anyway and I know I can speak for Rob too then just ask buddy.. Don't buy any timber either until you speak to us

Bru

15ft wide and 20ft deck to deck.... so minimum 3ft platform on one side only... thats a cert.

5ft for mellower tranny on the platform side maybe and 7ft flat ... 5ft steeper tranny up to the wall but not to vert?

Its gotta be possible to make something work

on a budget ... TrickyRich is offering wood and you as well which is great

I know a few builders and farmers for supplies ... maybe just need to invest in a nice skin.

All good food for thought ;-)

ED209 · « **Reply #21 on:** February 12, 2014, 08:12 PM »

Right ... so its deffo gonna have a FBM Crandall style carving vert wall one side and a 3ft mini ramp style the other :-)

Just got to work on what transitions are right for it ...

The Chapel of RAD will be built!

Munnyella · « **Reply #22 on:** February 12, 2014, 08:17 PM »

I shall measure tranny's all over Leicester as and when I see them!!

MM

ED209 · « **Reply #23 on:** February 12, 2014, 08:18 PM »

Quote from: Munnyella on February 12, 2014, 08:17 PM

I shall measure tranny's all over Leicester as and when I see them!!

MM

restraining order!

ED209 · « **Reply #24 on:** February 12, 2014, 08:28 PM »

Only ecumenically dressed riders will be allowed

and of course Matt Priest