Author Topic: Indoor mini mini ramp building (Read 2489 times)

Munnyella · « **Reply #25 on:** February 12, 2014, 08:43 PM »

This could become a `habit'

Boom...

MM

TwoBobRob · « **Reply #26 on:** February 12, 2014, 09:09 PM »

Quote from: ED209 on February 11, 2014, 07:32 PM

this looks fun tho Bru ... just for learning disasters / tyretaps / footplants :-)

This ramp looks very familiar to me. I'm almost certain it's a ramp that my previous employer built for a local skater. I then later relocated into someone's back garden, check it out;

Now, I suspect you'd look at that and say "looks fun".

You'd be wrong. It's fine for scooter kids and skaters but rubbish for bikes, for a whole load of reasons I'd rather not go into here.

Anyway, listen to Bru as he knows what he's talking about and don't start planning or spending money until you've spoken to us. I'd hate for you to lay out money and not have something worth riding at the end of it.

You can do summat with that space, so it's all good. Just need to make a smart decision as to what goes in there. A vert wall to 3ft quarter will be fun for all of five minutes - please trust me on that.

TwoBobRob · « **Reply #27 on:** February 12, 2014, 09:16 PM »

Quote from: aerostylie on February 11, 2014, 02:11 PM

Have been thinking about building one of those small trick ramps like bitd they used to show in mags/books how to build, just to do kickturns, ramp stalls......and rollbacks

Got the dimensions but never been anygood with wood (ooo err), banging and screwing Im fine!

That's something myself or Bru can do for you bud. Deliver it to you at a session sometime.

ED209 · « **Reply #28 on:** February 12, 2014, 09:29 PM »

Quote from: TwoBobRob on February 12, 2014, 09:09 PM

You can do summat with that space, so it's all good. Just need to make a smart decision as to what goes in there. A vert wall to 3ft quarter will be fun for all of five minutes - please trust me on that.

I trust you

I have no issues

so what might work?

obviously not this ...

Dannywhac · « **Reply #29 on:** February 12, 2014, 09:38 PM »

Sorry to interject, but can someone tell Cambridge Council that these are a fookin waste of money?

http://www.caughtinthecrossfire.com/skate/skate-news/canvas-to-build-two-new-skateparks-in-cambridge/

ED209 · « **Reply #30 on:** February 12, 2014, 10:02 PM »

Quote from: Dannywhac on February 12, 2014, 09:38 PM

Sorry to interject, but can someone tell Cambridge Council that these are a fookin waste of money?

http://www.caughtinthecrossfire.com/skate/skate-news/canvas-to-build-two-new-skateparks-in-cambridge/

bloody awful Dan ... had to leave a comment.

TwoBobRob · « **Reply #31 on:** February 13, 2014, 07:45 AM »

Quote from: Dannywhac on February 12, 2014, 09:38 PM

Sorry to interject, but can someone tell Cambridge Council that these are a fookin waste of money?

http://www.caughtinthecrossfire.com/skate/skate-news/canvas-to-build-two-new-skateparks-in-cambridge/

I know - horrible.

I've left a message. I'm currently working with Bar Hill to try and sort their mess out too.

TwoBobRob · « **Reply #32 on:** February 13, 2014, 07:47 AM »

Quote from: ED209 on February 12, 2014, 09:29 PM

Quote from: TwoBobRob on February 12, 2014, 09:09 PM
You can do summat with that space, so it's all good. Just need to make a smart decision as to what goes in there. A vert wall to 3ft quarter will be fun for all of five minutes - please trust me on that.

I trust you I have no issues

so what might work?

obviously not this ...

No bud. Those radii won't work for a bike. Way too tight unfortunately.

ED209 · « **Reply #33 on:** February 13, 2014, 07:56 AM »

Quote from: TwoBobRob on February 13, 2014, 07:47 AM

Quote from: ED209 on February 12, 2014, 09:29 PM
Quote from: TwoBobRob on February 12, 2014, 09:09 PM
You can do summat with that space, so it's all good. Just need to make a smart decision as to what goes in there. A vert wall to 3ft quarter will be fun for all of five minutes - please trust me on that.

I trust you I have no issues

so what might work?

obviously not this ...

No bud. Those radii won't work for a bike. Way too tight unfortunately.

drop the science Big Rob

who need flat!

TwoBobRob · « **Reply #34 on:** February 13, 2014, 09:50 AM »

...... and if you think that Harrows halfpipe has a 4 or 5ft transitions you're a little more silly than I thought......

Don't worry, we'll sort summmat out.

Bru · « **Reply #35 on:** February 13, 2014, 09:51 AM »

He's not silly, he's just a twat!

Bru

OllyHall · « **Reply #36 on:** February 13, 2014, 06:30 PM »

Proper twat!

nosepickben · « **Reply #37 on:** February 13, 2014, 09:56 PM »

Quote from: griff on February 11, 2014, 05:36 PM

Quote from: Spen69 on February 11, 2014, 02:34 PM
Ed, bring your tape-measure to the Boardroom in a week or so as that looks like the same sort of dimensions as the little practice ramp which is good for nothing on a bike I'd say $:-\$

If Spen's saying it's too small, you might want to think carefully about it

ha ha, I laughed so much some bowel popped oot..

Spen69 · « **Reply #38 on:** February 13, 2014, 10:34 PM »

Ed, you need a couple of these bad-boys

[ Attachment: You are not allowed to view attachments ]

Si and I made it one weekend and he decided to test it with the appropriate safety equipment - his site helmet and a bit of rusty old shite scaffold staging

ED209 · « **Reply #39 on:** February 13, 2014, 10:38 PM »

my list of invites guests is getting shorter

Rob you big teaser ... lets hear it

Bru · « **Reply #40 on:** February 13, 2014, 11:01 PM »

Quote from: ED209 on February 13, 2014, 10:38 PM

Rob you big teaser ... lets hear it

Oh it's such a fine idea!

Bru

TwoBobRob · « **Reply #41 on:** February 13, 2014, 11:34 PM »

PM sent......

Munnyella · « **Reply #42 on:** February 14, 2014, 08:12 AM »

Ed, steel clad half pipe at western park is about 6' tranny, 5' to platform with 9'6 flat.

More stats to come....

MM

ED209 · « **Reply #43 on:** February 14, 2014, 08:16 AM »

TwoBob has had a revolutionary idea... the diggers are moving in.

Off to get Bru his 3rd McDonalds of the day

pickle · « **Reply #44 on:** February 14, 2014, 09:02 AM »

Bru · « **Reply #45 on:** February 14, 2014, 11:14 AM »

Quote from: ED209 on February 14, 2014, 08:16 AM

TwoBob has had a revolutionary idea... the diggers are moving in.

Off to get Bru his 3rd McDonalds of the day

How far is McDs from the church, just asking like!

Bru

ED209 · « **Reply #46 on:** February 14, 2014, 11:47 AM »

Quote from: Bru on February 14, 2014, 11:14 AM

Quote from: ED209 on February 14, 2014, 08:16 AM
TwoBob has had a revolutionary idea... the diggers are moving in.

Off to get Bru his 3rd McDonalds of the day

How far is McDs from the church, just asking like!

Bru

6 miles Bru ... but my house is opposite and I make great sausage sarnies and tea on tap

Bru · « **Reply #47 on:** February 14, 2014, 11:54 AM »

Sausage sarnies and tea on tap sounds good to me!

Bru

ED209 · « **Reply #48 on:** February 14, 2014, 11:57 AM »

Quote from: Bru on February 14, 2014, 11:54 AM

Sausage sarnies and tea on tap sounds good to me!

Bru

I could even pull out one of award winning 8 item brekkies Bru