Author Topic: Kastan Pro Full Cro-Mo (Read 9991 times)

Gnarlyscoots · « **Reply #50 on:** January 08, 2014, 01:53 PM »

I have emailed them Si to see what they come up with

Thanks for the link.

nic968 · « **Reply #51 on:** January 08, 2014, 09:13 PM »

Oh man....If you're going to ride it I reckon 1 1/8 is they way to go..Embrace the future!!
1. You can't go wrong with LG's:
http://www.ebay.co.uk/itm/SE-Racing-20-inch-Landing-Gear-Forks-1-1-8-Brand-NEW-Special-offer-5-Colours-/121135067047?pt=UK_sportsleisure_cycling_bikeparts_SR&var=&hash=item1c34366fa7
2. Problem solver?
I think the Odyssey Pro headsets were mini sized with a shim supplied for regular headtubes( 1"), so they could work with your fatter shim?
Or:
http://bmxmuseum.com/forums/viewtopic.php?id=470886

nic968 · « **Reply #52 on:** January 08, 2014, 09:15 PM »

Did something just go missing while I was typing that?

Gnarlyscoots · « **Reply #53 on:** January 08, 2014, 09:29 PM »

Quote from: nic968 on January 08, 2014, 09:13 PM

Oh man....If you're going to ride it I reckon 1 1/8 is they way to go..Embrace the future!!

I know what you're saying bro. I would like to go that avenue at some point but already having the fork and stem, this little build will start to get very expensive to build

I have never liked landing gear fork to be honest, fat tubing with frail looking drops, and I am looking to keep this as era correct, 1994, as possible. Maybe an S&M fork or a later GT fork??

I have picked up an Odyssey Pro headset, NOS, but it is making it's usual route from seller to my mate in the US, then to me, due to over inflated postage charges by the seller

Julian347 · « **Reply #54 on:** January 08, 2014, 09:55 PM »

Why no go for some Answer forks or maybe S&M Pitchforks.

Gnarlyscoots · « **Reply #55 on:** January 08, 2014, 10:07 PM »

Quote from: Julian347 on January 08, 2014, 09:55 PM

Why no go for some Answer forks or maybe S&M Pitchforks.

Basically J, I am stuck to be honest. I have a GT Pro series fork and GT elite stem for it. To go in the 1 1/8 direction, I will have to get another fork, headset and stem, and then try to sell what I have

I did look at the Answer fork and tried to get hold of some, to no avail but do prefer the rigid fork. Pitch fork are era but again, still the head tube issue.

rodriguez · « **Reply #56 on:** January 09, 2014, 12:10 AM »

I feel somewhat responsible for giving you the heads up on the shims.

I see you options as in order of lowest to highest cost.

1. A combination of road bike cups with bear trap bearing races and lock nut.

2. Road bike head set as used by VDC's back in the day.

3. Custom made shims so you can use a BMX head set.

4. 1 1/8 forks, headset and stem.

Option 3 might be as cheap or even cheaper than option 2 depending on what it costs to get the shims made.

Gnarlyscoots · « **Reply #57 on:** January 09, 2014, 12:38 AM »

Quote from: rodriguez on January 09, 2014, 12:10 AM

I feel somewhat responsible for giving you the heads up on the shims.

Going to go with this Tange headset. It will fit the shims and is sealed bearings

Will be here Friday so I can actually get the fork, stem, bars and maybe cranks fitted

rodriguez · « **Reply #58 on:** January 09, 2014, 12:41 PM »

Quote from: Londonhellboy on January 09, 2014, 12:38 AM

Quote from: rodriguez on January 09, 2014, 12:10 AM
I feel somewhat responsible for giving you the heads up on the shims.

Going to go with this Tange headset. It will fit the shims and is sealed bearings

Will be here Friday so I can actually get the fork, stem, bars and maybe cranks fitted

Reckon that's the way to go

With the ~~bodging~~ modifications this a proper project.

Just think how easy life is now, BITD you have had to fold a coke can over a few times to make a shim then beat the cups in with a hammer.

NORTY40 · « **Reply #59 on:** January 09, 2014, 01:53 PM »

Nice frameset Terry , love that squareback rear end

Gnarlyscoots · « **Reply #60 on:** January 09, 2014, 02:09 PM »

Quote from: NORTY40 on January 09, 2014, 01:53 PM

Nice frameset Terry , love that squareback rear end

Thanks Joffy

When the guy posted it for sale on the Museum a few months back, he had it paired with a God awful fork and I just had to rescue it. I love chrome, especially survivor, and when the original decals are still applied, it's even betterer

Spent the last couple of months familiarising myself with 93 and 94 parts as I know getting hold of Kastan gear is expensive and very very hard

Pooch · « **Reply #61 on:** January 09, 2014, 09:48 PM »

Looking good Terry..

insectbones · « **Reply #62 on:** January 10, 2014, 10:20 AM »

Nice project there Terry

So, what's with the jump to midschool? O/S just not rocking your boat anymore?

Gnarlyscoots · « **Reply #63 on:** January 10, 2014, 02:22 PM »

Okay. Headset turned up this morning so time to fit this Fork at last

Cranks and BB fitted too

and these are the hubs I will be using, sealed Mohawks

Starting to look like a bike now

Julian347 · « **Reply #64 on:** January 10, 2014, 02:26 PM »

Love Technique cranks

What pedals you using?

Gnarlyscoots · « **Reply #65 on:** January 10, 2014, 03:15 PM »

With light fading fast, again

this is all I can do for now.

I am still waiting on the grips, spokes and Odyssey brake cable as I have the rims, tyres and chain

6 piece Elf Blast bars

GT stem

DX lever to match the caliper

'94 dated Turbo seat

and the pedals Julian

to be continued...

griff · « **Reply #66 on:** January 10, 2014, 03:42 PM »

not bad

wheels look a bit small though

Dark Diggler · « **Reply #67 on:** January 10, 2014, 03:52 PM »

Pooch · « **Reply #68 on:** January 10, 2014, 07:40 PM »

Looks spiffing Terry..

midschooljon · « **Reply #69 on:** January 10, 2014, 07:43 PM »

Looking good.

I take it the shims worked with the 1" headset?

Jaymz · « **Reply #70 on:** January 11, 2014, 09:40 AM »

Looking great

Gnarlyscoots · « **Reply #71 on:** January 11, 2014, 09:47 AM »

Thanks guys

Quote from: midschooljon on January 10, 2014, 07:43 PM

Looking good. I take it the shims worked with the 1" headset?

They are spot on Jon. The Odyssey Pro headset I have coming is 1" also so I might swap out the Tange on this for it, as that will be more fitting me thinks

Gnarlyscoots · « **Reply #72 on:** January 16, 2014, 07:44 PM »

Okay, the brake cable I won on Ebay turned up yesterday so I built the wheels and trued them, fitted the tyres and setup the brake.

CustardLips · « **Reply #73 on:** January 16, 2014, 07:49 PM »

Cool as fcuk is that.

Them bars would look better on my Doublecross though.

newlovetattoos · « **Reply #74 on:** January 16, 2014, 09:15 PM »

I remember 1/1.8 being rare in 94 and I was def running an odyssey 1 inch (beartrap off the top of my head) in 96 so id go for that myself

Author Topic: Kastan Pro Full Cro-Mo (Read 9991 times)

rodriguez

rodriguez

griff