Author Topic: spider sizes (Read 1245 times)

ED209 · « **on:** November 27, 2013, 10:19 PM »

looking at buying a spider but its listed in 2 sizes...

sizes 15/16” – 23.8mm and 3/4" - 19mm Spindle Hole.

whats the old/early mid standard? I'm guessing 19mm

fischflo · « **Reply #1 on:** November 27, 2013, 10:25 PM »

Recently read thata "standard 1piece crank is 23.8mm"; so i'd say 23.9mm is the standard ---- if i'm wrong, blame Brett

ED209 · « **Reply #2 on:** November 27, 2013, 10:29 PM »

sorry ... should have said this is for a 3pc crank

fischflo · « **Reply #3 on:** November 27, 2013, 11:19 PM »

since most 3pc/race cranks' spindles seem to be 19mm, you should be (al)right with a 19mm bored spider

ED209 · « **Reply #4 on:** November 28, 2013, 07:22 AM »

Cheers Fischyman

VOIVOD · « **Reply #5 on:** November 28, 2013, 12:35 PM »

Think most spiders had a 23.8 mm hole that fitted straight onto 1 pc cranks and older square taper axle 3 pc cranks.You can then add a tophat washer to fit to either a 19 mm or 22 mm crank spindle.

ED209 · « **Reply #6 on:** November 29, 2013, 09:56 AM »

Quote from: VOIVOD on November 28, 2013, 12:35 PM

Think most spiders had a 23.8 mm hole that fitted straight onto 1 pc cranks and older square taper axle 3 pc cranks.You can then add a tophat washer to fit to either a 19 mm or 22 mm crank spindle.

thanks James ... hope all is good with you mate