gfxgfx
 
logo
 
gfx gfx
gfx
975808 Posts in 138943 Topics by 6370 Members - Latest Member: Robertflamn November 26, 2024, 09:36 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Will these work with a redline 400 flight crank (Help needed) please.
gfx
gfxgfx
 

Author Topic: Will these work with a redline 400 flight crank (Help needed) please.  (Read 1192 times)

0 Members and 1 Guest are viewing this topic.

Offline Funkyworm

  • 540 Air
  • *******
  • Posts: 2228
  • Rated:


Any info would be welcome, I keep reading that  the 400 is different but i have a cooke bros spinal that fits exactly but would like a unit that supposed to work together.

I've seen 3 options one of which is advertised as working with all manner of cranks & the guy (coffeemilk) off of ebay swears they work but he's bloody expensive.

http://www.ebay.co.uk/itm/310758199158'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649

Also seen this :
http://www.ebay.co.uk/itm/Bottom-Bracket-Conversion-Crank-set-3-Piece-Vintage-Old-School-BMX-NOS-YST-Alloy-/221275533674?pt=AU_Sport_Cycling_Parts&hash=item33850cb16a


And this:
http://www.ebay.co.uk/itm/321197013009'ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649



Offline john4130

  • Look Back
  • *****
  • Posts: 1589
  • Rated:
i doubt any of them will fit, i had the same problem a few years ago trying to get an axle for my 400s. i bought a square taper axle like the ones above and it was a little bit small and the cranks wouldn't tighten up, i ended up using a shim made from a coke can which worked until i eventually bought an original axle and bearings from here. i think the diamond back harry leary cranks are the same.

Offline sawzall

  • 540 Air
  • *******
  • Posts: 2793
  • Rated:
your'e right john,the flights and the leary's are the same size

they are slightly larger than a standard 3 piece,if there for a show pony just shim them

using a standard 3 piece bb :daumenhoch:
British race frames and race clothing wanted

Offline Funkyworm

  • 540 Air
  • *******
  • Posts: 2228
  • Rated:
your'e right john,the flights and the leary's are the same size

they are slightly larger than a standard 3 piece,if there for a show pony just shim them

using a standard 3 piece bb :daumenhoch:

Cheers chaps, yeah they are for a pony i have one bb but the arms go to far on & theres no room for the dust cap to fit on the arm as the spindle protrudes.... Yeah the sugino 400 the redline & the harry leary cranks all use the same hardware, i think its really the bearings that i need as i have a cook bros spindle that came with it & fits well. The guy had the lot 7 it all came off of a cw cruiser but he left the rest of the bb in the frame as he didnt know how to take it out.   The frame has been sold & i think collected today so im hoping its new owner  can sort me out with the parts... from his frame ???

Offline scoff

  • Curb Endo
  • **
  • Posts: 139
  • Rated:
How much on eBay?
Try Gumtree it's cheaper
http://www.gumtree.com/p/for-sale/old-school-bmxretro-bmx-usa-bottom-bracket-set-suitable-for-fixie-project-or-old-school-bmx/1033070378
I think you'll have the same problem with the size, a homemade shim would be the answer.
 :chin:

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Will these work with a redline 400 flight crank (Help needed) please.
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal