Author Topic: 1977 Cycle pro Foiler . Now finished. PIC HEAVY. (Read 6586 times)

denzil · « **on:** September 17, 2013, 04:29 PM »

Well where to start, first of all I have a few people to thank. A very big thanks to Ash( Kungfunky ) for sourcing and and letting me have the frame and A big thanks to si ( darkdiggler ) for your help once again. But the biggest thanks goes to Steve ( Animal ) for bringing the frame back to life, without u Ste this frame would have been on the scrapheap.
The frame turned up from the U.S in a very sorry state, there were dings all over the frame the dropouts were chewed up and the back left side was Completely snapped off, so it was sent Straight to Steve to see if anything could be done. Steve said no probs but it might take a bit of time to sort it.
Well after about 4 months Ste send me it back and i could not believe the work he had done on it, as u can see from the pics it was Absolutely top class work.
Well next to come was to get it Reanodised and looking good Easier said than done, when I got it back from the Anodisers it looked bob on. So we started to build it up. As the BB was put on we Noticed finger prints all over the frame, I could not believe it as there was only a few days left to MK. off it when back to the Anodisers. I Finally got it back with just one day left to get it built for MK. So the build got on the way once again trying our hardest not to touch the frame lol. In the end it all came together no probs and It won second place in the vintage race Section at MK so I was buzzing to fook.
So here it is my 1977 cycle pro foiler, hope you like it as much as I do . Cheers.

Frame : 1977 cycle pro foiler
Forks : NOS race inc ( cheers Andy )
Bars : just a set of 70s bars ( Unknown name )
Stem : CEBE
Crank : sr apex
Pedals : NOS HTT rat trap
Chain : Izumi
Seat : 1960s Italian race bike seat
Seatpost : fook knows lol
Wheels : weinmann
Brake : weinmann caliper
Lever: dia-compe prebent
Tyres : Carlisle aggressor mx 200 (Changed since this pic was taken)
Grips : oury.

Peter J · « **Reply #1 on:** September 17, 2013, 08:12 PM »

Jizztastic

Taipan · « **Reply #2 on:** September 17, 2013, 08:52 PM »

Quality

sawzall · « **Reply #3 on:** September 17, 2013, 08:54 PM »

great resto

oldschoolace · « **Reply #4 on:** September 17, 2013, 09:00 PM »

That looks great Denzil

much respect all round for the resto and build

CustardLips · « **Reply #5 on:** September 17, 2013, 11:07 PM »

Great resto that Denzil

and great work by Steve Animal in bringing it back from the dead .

fischflo · « **Reply #6 on:** September 17, 2013, 11:30 PM »

Wow

..simply wow. I haven't read your post or looked at all the pics even -though i did see already that you have had 'some' hardcore resto work going on - ....but the bike itself is absolutely stunning. Really mind-blowing.

...and I'm sure I'll think the same, when I'm 64

denzil · « **Reply #7 on:** September 18, 2013, 12:13 AM »

Thanks for all your great Comments lads.

bodamus · « **Reply #8 on:** September 18, 2013, 02:35 PM »

Beautiful Denzil recognise a couple of those bits

pickle · « **Reply #9 on:** September 18, 2013, 02:38 PM »

proper job on that Denzil

flippin gorgeous

Oldboyburner · « **Reply #10 on:** September 18, 2013, 10:49 PM »

That was next to my motomag at mk I loved it mate
You work all round

NORTY40 · « **Reply #11 on:** September 18, 2013, 10:53 PM »

Awesome bike Denzil

Awesome resto Stevo

One of my favourite old school frames , loved them from the moment i saw Ash's a few years back

griff · « **Reply #12 on:** September 18, 2013, 11:36 PM »

great work

glenboy · « **Reply #13 on:** September 19, 2013, 12:04 AM »

great resto denzil, love them frames , who did the anno on it, ccc was it , really nice bike that love it mate, why is digglers head not connected to his body in that pic

Dark Diggler · « **Reply #14 on:** September 19, 2013, 02:59 PM »

Awesome bit of kit, through the trauma's, hi's and lows you have ended up with something really special. Proper rare piece of history

I seem to have developed "Dubber" proportion in that photo

kungfunky · « **Reply #15 on:** September 22, 2013, 03:19 PM »

Great job on this Denzil.
Remember the chat we had when I said " I have something you might like, there's only 2 in the UK and one of them can be yours"

Knew Steve could pull this off and he's done a belting job and despite all the anodising hastle it's been more than worth it. Great bike but you just need some decent tyres

denzil · « **Reply #16 on:** September 22, 2013, 06:31 PM »

Cheers again chaps. What can I say Ash , I loved your as soon as I saw it , saw was buzzing to fook to get my hands one one. Cheers mate. And your right about the tyres