Author Topic: Shimano DX Pedals restoration advice (Read 6741 times)

mivvi · « **on:** September 07, 2005, 10:59 AM »

I have just purchased a set of black Shimano DX pedals. I am getting them blasted and redone black but wanted to know if they were originally anodised or painted? Its hard to tell from the original coating that’s left on them. Thanks all!

pickle · « **Reply #1 on:** September 07, 2005, 11:06 AM »

Hi ya Mivvi

Thanks for sending me that picture by the way, but i've managed to find some blue beartraps to rip my shins to pieces on.

Cheers though for all the trouble you went too.

ORB · « **Reply #2 on:** September 07, 2005, 11:22 AM »

They were coated.

Get em sanded back to how they are meant to be and powder away.

ORB

oberonspacefruit · « **Reply #3 on:** September 07, 2005, 11:27 AM »

yeah,then your bearins will be as smooth as orb's.

dordymush · « **Reply #4 on:** September 07, 2005, 11:29 AM »

was there a joke in there phil

.

oberonspacefruit · « **Reply #5 on:** September 07, 2005, 11:31 AM »

i particulary like the crackling sound, it reminds you to keep peddlin.....when the sound stops,you fall off...

ORB · « **Reply #6 on:** September 07, 2005, 11:43 AM »

lmao!!

mivvi · « **Reply #7 on:** September 07, 2005, 12:40 PM »

Thanks for the info Orb, powder it is then. Pickle, no worries on the other pedals glad your sorted anyhow.

Bob_Acid · « **Reply #8 on:** September 07, 2005, 02:24 PM »

i think on the black ones the paint on the raised shimano logo was ground down to bare metal?

mivvi · « **Reply #9 on:** September 07, 2005, 02:46 PM »

Yea your right there Bob. Its gonna be fun getting that looking right after powder. Hope they turn out better than the Nippon brakes I just did, had to repaint the names in after painting the arms. Hmm, they look really nice now, lol. They were worth about £30 when I started, now worth about 30p! Gotta laugh.......

Bob_Acid · « **Reply #10 on:** September 07, 2005, 05:00 PM »

Airfix brushes. You could always get a pot of metalic silver and do the logo on the pedels

mivvi · « **Reply #11 on:** September 07, 2005, 05:09 PM »

Not too good with the brushes, found that out on the brakes. Was told I was supposed to use releasing fluid or something before repainting them, whoops! I think I will have a go at carefully filling off the paint on the pedals around the logo, if it all goes wrong you can buy them off me, lol.

oberonspacefruit · « **Reply #12 on:** September 07, 2005, 07:38 PM »

are they indented or proud?

Bob_Acid · « **Reply #13 on:** September 07, 2005, 08:06 PM »

of course they are proud, they are 'Shimano DX' the Godfather of the platform pedal

mivvi · « **Reply #14 on:** September 07, 2005, 09:22 PM »

As Bob says, O'Yes they are proud. Sticking outward for the world to see!

You wouldn't have some advice on indented logo's though, iv'e messed me logo's on my brakes up a treat..... $:-\$

Kelly · « **Reply #15 on:** September 07, 2005, 09:46 PM »

I THINK they were either spray painted very thinly or indeed anodized as I was looking for black ones for some time and asked quite a few people and they said anodized. I had some silver ones powdercoated and the paint was way too thick for me to sand down the lettering to silver. Biagio has NOS black ones I think, ask him..

oberonspacefruit · « **Reply #16 on:** September 08, 2005, 08:46 AM »

if its indented you can rub a good quality oil based pastel over it, wipe it off carefuly which leaves it in the nicks.....

try a pad for the proud ones.....maybe a sanding block tightly wrapped with cotton dabbed in pain. remove excess, amd dab away..

mivvi · « **Reply #17 on:** September 08, 2005, 09:46 AM »

Thanks for the info Kelly and Obe. I might have a word with the powder coaters, they must be able to adjust the thickness of paint. I don't really want to bother Biagio as I don't buy anything off him. Obe, on the advise you gave, are these methods you have tried? If so I could be interested in some more info if you don't mind. Thanks all!

oberonspacefruit · « **Reply #18 on:** September 08, 2005, 12:20 PM »

i have tried it on indented things before,like dice,and gear diagrams on gear knobs....worked fine...

mivvi · « **Reply #19 on:** September 08, 2005, 01:41 PM »

Cool, will give it a go then. If it turns out well, I will get some pics up.

Bigplinky · « **Reply #20 on:** September 08, 2005, 10:24 PM »

All the DX pedals were painted

I just stripped a blue pair that had been hand painted black to try and get a blue pair again and what happened hay presto a silver pair (I thought they were anodised but apparently not)

The original coating looks like a white base coat with a candy type colour appied over it, apart from black ones which are plain black. Just for info the shimano logo is always the same colour as the pedal I sanded the logo silver on my original black ones (as most people did).

Later

Andy

P.S. I think powdering them would make them pretty slippy as the coating will take the sharpness off the pins

mivvi · « **Reply #21 on:** September 09, 2005, 10:29 AM »

Thanks Andy. Well that's something I didn't know, I would have bet my arse on the coloured ones being anodised, learn something new everyday. Im positive the ones I have are original and un-touched since new though and they have the Shimano logo in silver (As in no paint on it)?

fatboymal · « **Reply #22 on:** September 10, 2005, 06:59 AM »

Marcus,

Biagio has told me before that the blue were painted (and the black obviously) but the gold were anodized. Don't know for sure but I have a feeling the red were painted also. None of them had the raised lettering in silver, but as Andy says lots of us sanded them back to silver BITD.

I still have one pair of NOS gold left, and am having to resist putting them on my new school ride, they would look rather sweet!

oberonspacefruit · « **Reply #23 on:** September 12, 2005, 02:05 PM »

red were painted,as mine stripped in nitromores,right down to the alloy.

ORB · « **Reply #24 on:** September 12, 2005, 02:10 PM »

Blue were coated in this funny plastic stuff, but Nitro tears it off.

Author Topic: Shimano DX Pedals restoration advice (Read 6741 times)

Kelly

fatboymal