Author Topic: As if 19 or 22 isn't enough choice (Read 1326 times)

pickle · « **on:** August 12, 2014, 05:25 PM »

http://eclatbmx.com/products/cranks-bb-sets/onyx-crank/

oldtired · « **Reply #1 on:** August 14, 2014, 05:17 PM »

one positive thing is that , Eclat are flogging off all the 22mm two piece crank sets , loads of em on ebay, under 60 squids bargain

, colors are limited but for that price who cares, check the tool is in the box though with the seller cos you'll have to wait for one to be sent out before fitting em if not

Gary72 · « **Reply #2 on:** August 19, 2014, 11:16 PM »

Fit bought out a 24mm crank set last year. I'm in no way a heavy rider and would worry about how small the bearings will be. I had a frame with a euro BB and Primo 22mm cranks and the bearings were really thin.

VOIVOD · « **Reply #3 on:** August 20, 2014, 12:30 AM »

Box Vector race cranks-35mm spindle:)http://www.boxcomponents.com/products/vector-crankset/

Know what you mean about 22mm cranks in a Euro BB,last 5 minutes:(

Dark Diggler · « **Reply #4 on:** August 20, 2014, 04:05 PM »

It's Just more MTB standards being adopted, 31.8 mm bmx handle bars have been kicking around for a while, tapered head tubes and forks, 20mm wheel axles, bb30 bb shells.
To be honest, a lot of the "new" innovations are aimed at race bmx and not park/street. I'm with Gary on the 24mm cranks, to me, it would best with a euro external bb where a bigger bearing can be used.

It's no bad thing as long as there is a benefit. You have more choice but it's worth remembering that sticking with what you know is one of those choices