Author Topic: Aero Araya to HF hubs?? (Read 393 times)

Gnarlyscoots · « **on:** August 13, 2013, 02:12 PM »

Guys, if you have a set of Aero Araya rims laced to HF hubs, could you possibly measure the spoke length, from the bend to the thread tip (roughly) and tell me if it's 3 cross or 4 cross please, thanks.

I have followed the Rad guide, used the calculator and coming out with 176/177mm Rear/Front for 3 cross and 187/188mm Rear/Front for 4 cross.

I would just like to know what you are running and what your setup is

Cheers,

Terry

steve69 · « **Reply #1 on:** August 13, 2013, 05:39 PM »

Terry, I can confirm the 3x measurement is correct (176mm).

(Don't tell Sean I told you

)

Gnarlyscoots · « **Reply #2 on:** August 13, 2013, 11:12 PM »

Thanks Steve

I won't tell Sean you told me.

You wouldn't happen to know where I can get some that size would you mate

NORTY40 · « **Reply #3 on:** August 13, 2013, 11:28 PM »

I just stripped a set down for a mate ready for polishing and they were defo 180mm on a 3 cross to large flange Suntour hubs . The threads were right up to the end of the nipple though so a touch shorter would be perfect

This lad is good for custom length spokes http://www.ebay.co.uk/itm/BICYCLE-SPOKES-DT-Swiss-Any-length-any-quantity-4-1-20-stainless-steel-/251317305996?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item3a83adc28c#ht_918wt_1203

nitrohopper · « **Reply #4 on:** August 13, 2013, 11:45 PM »

tel i have large flange sr hubs on my gt with araya aeros im sure mine were 186 i will double check tom for ya as i still have the bag with the spares in

NORTY40 · « **Reply #5 on:** August 13, 2013, 11:47 PM »

Quote from: nitrohopper on August 13, 2013, 11:45 PM

tel i have large flange sr hubs on my gt with araya aeros im sure mine were 186 i will double check tom for ya as i still have the bag with the spares in

Possibly a 4 cross lace $:-\$ defo too long for a 3cross .

steve69 · « **Reply #6 on:** August 14, 2013, 06:36 AM »

Quote from: NORTY40 on August 13, 2013, 11:28 PM

I just stripped a set down for a mate ready for polishing and they were defo 180mm on a 3 cross to large flange Suntour hubs . The threads were right up to the end of the nipple though so a touch shorter would be perfect

This lad is good for custom length spokes http://www.ebay.co.uk/itm/BICYCLE-SPOKES-DT-Swiss-Any-length-any-quantity-4-1-20-stainless-steel-/251317305996?pt=UK_sportsleisure_cycling_bikeparts_SR&hash=item3a83adc28c#ht_918wt_1203

I used that person for spokes only last week and all's good, great communication and had 108 spokes (in two sizes) custom cut on my doorstep within three days

Also, if my memory serves me right, I laced the fore mentioned wheel set with 181's (back it the days before Sean's link to the 'spoke calculator') but they measure up at 176.