Author Topic: What is everyone using nowadays to strip? (Read 624 times)

Jamroll · « **on:** July 02, 2013, 01:57 PM »

I've run out of the normal crap i used,and the gasket cleaner form work does fook all, I know the stuff SBD uses is proper stuff but i really don't need a couple of gallons of the stuff forthe amount of bikes i build,can anyone recommend what they use to strip Powder or help me out with a little of Dans stuff?

Cheers
Al

* Now found i need some Synstrip, but don't need 5 ltrs of the stuff, who has got some here i could have, ED209 had some a little while back...anyone else able to help me out..Mattbloke?

Taipan · « **Reply #1 on:** July 02, 2013, 04:58 PM »

In my experience Synstrip is rubbish,the paint was just as hard to get off as using a cheapo stripper from Wilko's $:-\$ seen pictures on here with paint just falling off frames? not so in my experience sorry

AKGOFF · « **Reply #2 on:** July 02, 2013, 05:02 PM »

Send it to the Chromers Al and let them do the hard work. I just had some painted forks and a Chrome frame stripped and they were back in a day, £60 job done

Jamroll · « **Reply #3 on:** July 02, 2013, 05:35 PM »

Quote from: AKGOFF on July 02, 2013, 05:02 PM

Send it to the Chromers Al and let them do the hard work. I just had some painted forks and a Chrome frame stripped and they were back in a day, £60 job done

Cheers for that Big Fella, but I've only got a head set that needs doing

oldtired · « **Reply #4 on:** July 02, 2013, 06:46 PM »

Rustins Strypit is ok

works like nitromose used to before they made it eco friendly

comes in 250 or 500ml tin s too

Funkyworm · « **Reply #5 on:** July 02, 2013, 07:15 PM »

Quote from: Taipan on July 02, 2013, 04:58 PM

In my experience Synstrip is rubbish,the paint was just as hard to get off as using a cheapo stripper from Wilko's $:-\$ seen pictures on here with paint just falling off frames? not so in my experience sorry

Synstryp does work, for small parts like headsets you need to try to keep the part in a container & pour on . A small (tupperware container) will do & stick the lid on !

Because of the fumes if you are doing a frame or larger part you really need to work in a well ventilated area or do it outside . Problem with this is it tends to evaporate quickly & it dries up so you need to give it a head start, i've scored the paint or powder with a wire brush before painting or pouring it on & then placed the frame in to a large bin liner (rubble sack) & sealed the top stopping it from evaporating & it works a treat but you need to be patient. On a thick powder it could take a day or so but it will do the job.