spoke advice

[winnit93]

ive got these gt hubs that im useing on my next build

the rims im useing are nos ukai 1 1/8.
what size spokes do i need.

[winnit93]

I know the ERD (effective rim diameter) . . . I need the following ??

• Hub flange diameters
• Hub centre to flange measurements on each hub (centre to R/H flange and centre to L/H flange)

Cheers

Steve 

right steve

its the hub centre to flange measurement that confuses me,am i right in thinkin i measure frome the gt sticker in the middle of the hub to the edge of the flange.
thanks
scotty

[Steve P]

Cheers . . . not sure where my 1st reply disappeared too 

Yeah . . . that's it . . . measure the distance from the centre of the hub across to the centre of each hub flange

Are they 36 hole Ukai you're using too

Steve

[winnit93]

ye 36 hole

front flange diameter 480mm

rear flange diameter 550mm

from centre to flange front hub 350mm

from centre to flange rear hub 330mm

hope this all makes sence

[Steve P]

ye 36 hole

front flange diameter 480mm

rear flange diameter 550mm

from centre to flange front hub 350mm

from centre to flange rear hub 330mm

hope this all makes sence

WOW . . . them hubs are huge Scott 

Should be:

front flange diameter 48mm

rear flange diameter 55mm

from centre to flange front hub 35mm

from centre to flange rear hub 33mm

Two secs . . . I'll check it out for you 

[winnit93]

i wouldnt mind but i work with measurements

i recon im tired

[Steve P]

With your hub measurements . . . using long nipples

Cross 3 pattern . . . 210mm spokes

Cross 4 pattern . . . 218mm spokes (recommended)

Let me know if you need any more help

Cheers

Steve 

[oberonspacefruit]

tuffs.

[theRuler]

tuffs.

tuffs are for burners