Author Topic: My fiirst time...... (Read 526 times)

Gnarlyscoots · « **on:** April 21, 2013, 05:35 PM »

at fitting a freecoaster

I picked up these '~~scabby~~' minty first gen black Tuff II's to complement my Kuwahara that I am slowly gathering parts for to rebuild it.

It came with a 22T cog, yes, 22T

and as I hate coasters anyway, I thought I would fit a NOS ACS Freecoaster I have to them. Never done one before so thought I would give it a bash.

I got carried away and stripped the complete coaster and decided to re-grease the complete setup. Sorry no pics as my hands were greasy

Here it is completed

To say it was easy is an understatement. It was piss easy

Wez · « **Reply #1 on:** April 21, 2013, 05:47 PM »

nice, I was thinking of doing the same to my steelers but I like the cable free look on the TA

theyre in fine fettle yours

Devilock · « **Reply #2 on:** April 21, 2013, 06:14 PM »

Nice but why didnt you remove the arm...?

Wez · « **Reply #3 on:** April 21, 2013, 06:15 PM »

I'd dib dobs the arm if its going anytime

Gnarlyscoots · « **Reply #4 on:** April 21, 2013, 07:12 PM »

Quote from: Devilock on April 21, 2013, 06:14 PM

Nice but why didnt you remove the arm...?

The idea of the freecoaster is to switch it from coaster to freewheel by pulling up the 2 pins, turning the freewheel a click and then screwing the pins down. It takes around 5 seconds. This was designed to keep the coaster arm in place to enable both options if required. Authenticity Rich, authenticity (unless it's Suntour hex bolts

).

Devilock · « **Reply #5 on:** April 21, 2013, 07:14 PM »

Quote from: Londonhellboy on April 21, 2013, 07:12 PM

Quote from: Devilock on April 21, 2013, 06:14 PM
Nice but why didnt you remove the arm...?

The idea of the freecoaster is to switch it from coaster to freewheel by pulling up the 2 pins, turning the freewheel a click and then screwing the pins down. It takes around 5 seconds. This was designed to keep the coaster arm in place to enable both options if required. Authenticity Rich, authenticity (unless it's Suntour hex bolts ).

Oh I see...me not know that.

Wez · « **Reply #6 on:** April 21, 2013, 08:01 PM »

Quote from: Londonhellboy on April 21, 2013, 07:12 PM

Quote from: Devilock on April 21, 2013, 06:14 PM
Nice but why didnt you remove the arm...?

The idea of the freecoaster is to switch it from coaster to freewheel by pulling up the 2 pins, turning the freewheel a click and then screwing the pins down. It takes around 5 seconds. This was designed to keep the coaster arm in place to enable both options if required. Authenticity Rich, authenticity (unless it's Suntour hex bolts ).

Teach me London san