Shimano freewheel remover !

[Funkyworm]

Hi,

has anyone Got a Shimano freewheel remover to fit the freewheel in the pic below ? Can't seem to get the Fokker off & I don't want to resort to using the dremel .

[ED209]

if you're stuck theres always the screwdriver / hammer method Callum

 

[brummie]

could try you lbs
they dont usually charge just to take a freewheel off
and they have all the gear to do it

[Funkyworm]

if you're stuck theres always the screwdriver / hammer method Callum

 

Had a quick go at that mate but before i break it I think might take it to a bike shop see if they can do it as per  brummie's suggestion !

[not johndub71]

Tool aint much to buy. A vice is needed though. You are twatting it anti clockwise?

[Funkyworm]

Tool aint much to buy. A vice is needed though. You are devilockting it anti clockwise?

Yeah Im hitting it in the right direction...

[not johndub71]

I've use a chisel and lump hammer before. Alternate the blows on the cut outs. top/bottom/top/bottom if you get me. Warm it up too with the missis's hair dryer, hotter the better.

[animal]

Hit it ------- Harder 

[steve69]

eBay item number 171025561618 is what I use on that type of freewheel ( as said you will need a vice bolted to a sturdy bench )

I could send it to you but the time there's postage involved you may as well buy one so you have it for next time.

 

[Funkyworm]

Local Bike shop did the trick for me only £2 & i didn't twat my hand with a hammer this time  !

Tuffs now in the hands of the Aqua Blasters hoping to have them back soon