Author Topic: Crupi cage bolt problem (Read 809 times)

neil · « **on:** April 11, 2013, 02:04 PM »

Thought I'd strip the colour off the cages on my crupis,but when to get me Allen keys and noticed all the cages bolts are rounded any idea how I can get em out?

boofy44 · « **Reply #1 on:** April 11, 2013, 05:33 PM »

you could try and cut a slot across the top of them with a dremmel or junior hacksaw.

not johndub71 · « **Reply #2 on:** April 11, 2013, 07:18 PM »

drill?

NORTY40 · « **Reply #3 on:** April 11, 2013, 07:22 PM »

Quote from: boofy44 on April 11, 2013, 05:33 PM

you could try and cut a slot across the top of them with a dremmel or junior hacksaw.

Good tip

It worked for me on some crupi's and a stubborn one on a set of XCII's . The suntour one was a bit trickier as the screw is ressesed .

Peter J · « **Reply #4 on:** April 11, 2013, 07:24 PM »

Quote from: boofy44 on April 11, 2013, 05:33 PM

you could try and cut a slot across the top of them with a dremmel or junior hacksaw.

Yup

Munnyella · « **Reply #5 on:** April 11, 2013, 07:38 PM »

once the slot is cut, put the allen key in and give it a sharp crack with a hammer to `break the seal' and hopefully make life easier with the screwdriver, make the screwdriver fit well too.

MM