Author Topic: dirtbike ad mounts (Read 842 times)

THIRSTYKIRSTY · « **on:** April 19, 2013, 09:41 PM »

been tryin to sell for a while now with no joy

so gonna remove AD mounts and powder frame

wats best way to remove them with least damage

dordymush · « **Reply #1 on:** April 19, 2013, 09:45 PM »

you'll ruin it

dan-dare · « **Reply #2 on:** April 19, 2013, 09:48 PM »

Dynamite, meep meep.....

bof · « **Reply #3 on:** April 19, 2013, 09:54 PM »

Ask diggler :-)

bof · « **Reply #4 on:** April 19, 2013, 09:58 PM »

Cut off most of the metal with a hacksaw, and then grind down the rest gently with one of these. Never done one myself but heard this is the best way .
http://www.amazon.co.uk/dp/B000T9QZME/'tag=hydra0b-21&hvadid=9556632549&ref=asc_df_B000T9QZME

Munnyella · « **Reply #5 on:** April 20, 2013, 06:28 PM »

Exactly what Bof said, done it on loads of forks, take your time, dead easy.

MM

GavinDavis · « **Reply #6 on:** April 20, 2013, 07:10 PM »

Don't so it Russ!

Dark Diggler · « **Reply #7 on:** April 20, 2013, 07:47 PM »

Quote from: bof on April 19, 2013, 09:58 PM

Cut off most of the metal with a hacksaw, and then grind down the rest gently with one of these. Never done one myself but heard this is the best way .

..my sides need stitching up