Author Topic: whitehawk no 10 done and seen by creator (Read 6963 times)

nitrohopper · « **on:** April 07, 2013, 05:28 PM »

Today my mate steve brought me round whitehawk no10 which is going to be a joint resto project over the next few months . Steve has owned this bike since 1983 and has been sat in the shed at his mothers house since 1989 as you can see from the pictures we have our work cut out any info that anyone has ref the wally whitehawk sticker as ours is only half there we would like another on this bike when it is eventually finished

GavinDavis · « **Reply #1 on:** April 07, 2013, 05:33 PM »

Its certainly lost its shiney nature.....but will be a good project

nitrohopper · « **Reply #2 on:** April 09, 2013, 08:20 PM »

heys guys does anyone know if i can get these bars back to former glory the metal though rusted on top seems good underneath would i need to wire brush them dip them can anyone help these were nice powerlite bars bitd cheers bullseye

sawzall · « **Reply #3 on:** April 09, 2013, 08:25 PM »

can't wait to see progress with this

i use this stuff for rust removal http://www.ebay.co.uk/itm/Hammerite-Rust-Remover-Dip-1-Litre-Dilutes-to-make-10-Litres-/261156486793?pt=LH_DefaultDomain_3&hash=item3cce23be89

i also have an image of wally

hunterdubber · « **Reply #4 on:** April 09, 2013, 08:35 PM »

Looks like pretty well established rust but

If this turns out half as nice as Phil's Whitehawk ,,, well you're on to a winner

Good luck with the project and will be looking forward to the updates

Taipan · « **Reply #5 on:** April 09, 2013, 08:47 PM »

Do you mean 'Powerlite' bars? nice bars those with the powerbend

Pooch · « **Reply #6 on:** April 09, 2013, 08:48 PM »

I do love this sort of thread.. Good luck lads

nitrohopper · « **Reply #7 on:** April 09, 2013, 08:53 PM »

thanks phill will try the rust stuff and soak the bars frame and forks also i am going to try and polish the 83 mx 1000 that we have with this bike
thank u hunter dubber for words of encouragment ,
thanks bullseye for correcting me on the powerlite bars
and cheers Pooch for noticing
its going to be a long and maybe expensive rd but i think to keep one of englands own alive and kicking it will be well worth it cheers guys

bobbbbsy · « **Reply #8 on:** April 09, 2013, 08:57 PM »

scrape all that crap off with a knife ! it will improve. trouble is it will return slowly !

nitrohopper · « **Reply #9 on:** April 09, 2013, 10:32 PM »

a few more pics of job in hand

deeman · « **Reply #10 on:** April 09, 2013, 11:53 PM »

Cool project!look forward to this!BENDYCAT ELEVENTEEN has done resto threads about bringing up chrome as bad as this.It would be worth reading as he had fantastic results.

MartyC · « **Reply #11 on:** April 10, 2013, 01:19 PM »

Love the Ripseed sticker, they had a shop in Pinner or Hatch End iirc

deeman · « **Reply #12 on:** April 10, 2013, 01:28 PM »

Quote from: MartyC on April 10, 2013, 01:19 PM

Love the Ripseed sticker, they had a shop in Pinner or Hatch End iirc

not sure about that,I thought the only one was in Edmonton? $:-\$
The brazing/welding on that frame looks the nuts btw

Badbaldie · « **Reply #13 on:** April 10, 2013, 01:39 PM »

gona enjoy following this thread

Mattdub · « **Reply #14 on:** April 10, 2013, 02:08 PM »

Cool thread & cool bike

. Look forward to seeing the progress

kungfunky · « **Reply #15 on:** April 10, 2013, 02:46 PM »

Very cool frame that and super rare too, very much looking forward to the finished build

MartyC · « **Reply #16 on:** April 10, 2013, 03:17 PM »

Quote from: deeman on April 10, 2013, 01:28 PM

Quote from: MartyC on April 10, 2013, 01:19 PM
Love the Ripseed sticker, they had a shop in Pinner or Hatch End iirc

not sure about that,I thought the only one was in Edmonton? $:-\$
The brazing/welding on that frame looks the nuts btw

Nope they had at least 2 shops that I can say with 110% certainty

http://www.r-tecautodesign.com/keith_ripp_ripspeed_rallycross/keith_ripp.htm

Macmania · « **Reply #17 on:** April 10, 2013, 06:36 PM »

Great looking project. Looking forward to the resto

sawzall · « **Reply #18 on:** April 10, 2013, 07:15 PM »

a little bit of inspiration for you

nitrohopper · « **Reply #19 on:** April 10, 2013, 07:27 PM »

mate thank u who did ur decals? they are cool i remember that mini from back in the day i seem to remember that mini having a uni black mini and some cali lite black pads and skinny comp3 style tyres mate for a second i was twelve again looking around that shop in ore of all the great bikes and bits that were there for us to druell over .. do u think i should do WANTED LIST up of the parts i am after to make this build the muts or is ity best to just say as i can afford or should i get everone looking for the blue /silver bits now whatr do u think evereone has been so helpful with my pro p that i know that u could all do well the aim is to get it done for mk13

senzo milano · « **Reply #20 on:** April 10, 2013, 08:58 PM »

Wow.. this one is needing a lot of TLC

Andy68 · « **Reply #21 on:** April 11, 2013, 09:50 AM »

Awesome find...........

Peter J · « **Reply #22 on:** April 11, 2013, 09:56 AM »

Thats brilliant amazing find

animal · « **Reply #23 on:** April 11, 2013, 03:31 PM »

The bars can b saved . Chromers will clean all that then copper plate first, polish then nickle and Chrome. Triple plate will easy save them fella

I have saved worse believe me

gotta a pair I'm doing at mo that r far worse than urs

good luck with the resto its a well cool F&F that

deeman · « **Reply #24 on:** April 12, 2013, 01:32 AM »

Quote from: MartyC on April 10, 2013, 03:17 PM

Quote from: deeman on April 10, 2013, 01:28 PM
Quote from: MartyC on April 10, 2013, 01:19 PM
Love the Ripseed sticker, they had a shop in Pinner or Hatch End iirc

not sure about that,I thought the only one was in Edmonton? $:-\$
The brazing/welding on that frame looks the nuts btw

Nope they had at least 2 shops that I can say with 110% certainty

http://www.r-tecautodesign.com/keith_ripp_ripspeed_rallycross/keith_ripp.htm

I stand corrected!never knew about the others!I visited the Edmonton one on a few occasions