Author Topic: pedal size (Read 507 times)

pmk · « **on:** April 02, 2013, 07:47 PM »

i have a sigino one peice crank on my skyway ta , got new pedals for it but the spndle threads are too fat for the hole , the pedals i got were 1/2 inch ......... what is the correct pedal size for an 80's sugino crank ?

HUTCHMAN · « **Reply #1 on:** April 02, 2013, 07:51 PM »

set of 9/16 ths in a 1/2 " box?

pmk · « **Reply #2 on:** April 02, 2013, 07:55 PM »

yes the threaded part is big , wont fit in the crank , so do i need 1/2inch ones

BENDYCAT ELEVENTEEN · « **Reply #3 on:** April 02, 2013, 08:04 PM »

yup - sounds like you have 9/16" (three piece cranks) and you need 1/2" one piece crank

GavinDavis · « **Reply #4 on:** April 02, 2013, 08:06 PM »

Yep agreed, you must have a set of 9/16's there......1/2" is what you need

BMX1973 · « **Reply #5 on:** April 06, 2013, 01:29 PM »

..........agreed on all of the above.

BENDYCAT ELEVENTEEN · « **Reply #6 on:** April 06, 2013, 01:37 PM »

agreed on the above that agreed with what I said and agreed with what I have said again with agreeing with the above agreed people agreeing with me - glad we got that agreed