Early stapmed Primo Powerbite cranks... What are they fetching these days?

[midschooljon]

Ive got a set of early powerbites Im considering shifting. Was saving them for a T-1 build but have decided to not build up the frame as its a NOS 1st gen Barcode.  Anyway, want to move the cranks on now but not sure what to ask for them? Anyone bought or sold some recently?

[fugazi]

Got a pic You can put up? 

[midschooljon]

Will dig them out the garage tomorrow and snap a pic. Pretty much look like this though (but with 10 years of dust and sweat on them  )

[Gary72]

There's a polished set on ebay at the moment.
I recently bought a set from ebay for £19 plus postage, Came with sprocket and pedals (Stuck in arms) Got the pedal out no problems. Jim C magnesium pedals.
I sold a set at MK12 for I think £40.
Any ideas how many different types of powerbites there are?
I have a set, Which I think has no pedal insert, The recently bought set, With the insert just fitted from the back of crank arm and a couple of sets with inserts fitted from the front with a lock type ring on the rear.

[dordymush]

the last set i bought were off ebay and a good tidy set in black.
again with a pedal stuck.but with a bit of lump hammer action it came out ok.
26 posted.

im after another set if there not mental money.
give us a shout and i'll have a look.

[fugazi]

As far as I know there were Three main versions of the Powerbites, 1st gen had a solid axle & no pedal inserts, 2nd gen with 1pce pedal inserts & later a hollow axle, 3rd gen 2pce pedal inserts, hollow axle, drilled for rhd/lhd & at some point I think various small changes to the shape of the arms around the sprocket bolt area to allow smaller sprockets. Then there was the slimmer, lighter Hollowbites.

[Gary72]

As far as I know there were Three main versions of the Powerbites, 1st gen had a solid axle & no pedal inserts, 2nd gen with 1pce pedal inserts & later a hollow axle, 3rd gen 2pce pedal inserts, hollow axle, drilled for rhd/lhd & at some point I think various small changes to the shape of the arms around the sprocket bolt area to allow smaller sprockets. Then there was the slimmer, lighter Hollowbites.

Thanks
Any ideas on rough years each was introduced?

[fugazi]

I'm not sure, '97ish originally I think though.

[gib66]

i got mint set off here 2 weeks ago for 45.00 and was well happy at that for em

[thecaptain]

40-50 seems fair

although better deals can be had with ebay

[midschooljon]

Cranks have been added to my for sale thread here. 

http://www.radbmx.co.uk/forum/index.php/topic,159243.msg1585133.html#msg1585133

[Gary72]

http://www.ebay.co.uk/itm/PRIMO-Polished-175mm-Aluminum-BMX-3pc-Cranks-Very-Clean-/111021274876?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWAX%3AIT&nma=true&si=pg0TzRhnpbWVPkQnA3mtTF9LNJE%253D&orig_cvip=true&rt=nc

[Jaymz]

http://www.ebay.co.uk/itm/PRIMO-Polished-175mm-Aluminum-BMX-3pc-Cranks-Very-Clean-/111021274876?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWAX%3AIT&nma=true&si=pg0TzRhnpbWVPkQnA3mtTF9LNJE%253D&orig_cvip=true&rt=nc

oooo they were nice

[minimarvel]

I got a set off ebay £35 delivered, rubbing them down to use as fake GT power bites for my 89 pro series

[Gnarlyscoots]

I bought a set a little while ago from here for £35 and the BB turned out to be unusable so watch for that guys. A new BB is £20 so add that to cranks.

They now look like this