Author Topic: NOS 2Hip Stout Boy :: FINISHED PAGE 4 (Read 13406 times)

Gnarlyscoots · « **Reply #25 on:** February 21, 2013, 10:49 PM »

Quote from: discostu on February 20, 2013, 09:49 PM

If not run a slightly smaller front sprocket like a 38 or 40t with a coaster at the rear to give a good ratio.

I wouldn't run a coaster Stu with such a small front ring. Coaster sprockets are normally 18T plus and with a 40T at the front, it would be like trying to ride a flatland setup.

I would try something like a Shimano DX hub at the rear Jaymz. Flip the sprocket inwards to move the chain away from the stay. They are normally 14T too so running a 40T at the front is okay with it.

Discostu · « **Reply #26 on:** February 21, 2013, 11:32 PM »

Quote from: Londonhellboy on February 21, 2013, 10:49 PM

Quote from: discostu on February 20, 2013, 09:49 PM
If not run a slightly smaller front sprocket like a 38 or 40t with a coaster at the rear to give a good ratio.
I wouldn't run a coaster Stu with such a small front ring. Coaster sprockets are normally 18T plus and with a 40T at the front, it would be like trying to ride a flatland setup.

I would try something like a Shimano DX hub at the rear Jaymz. Flip the sprocket inwards to move the chain away from the stay. They are normally 14T too so running a 40T at the front is okay with it.

Terry what the fook are you talking about???

I'm not talking about a coaster on a set of tuffs from the 80's mate.
I'm talking about a 90's freecoaster like a nankai, static or sym hub. These all run 16 down to 13 tooth rear sprockets mate. Come on son get with the mid school!!!

Gnarlyscoots · « **Reply #27 on:** February 22, 2013, 12:06 AM »

Quote from: discostu on February 21, 2013, 11:32 PM

Terry what the fook are you talking about???

Any need for that?? Was I rude to you??

Unlike you, mid school to me didn't happen. 100% old school here

Discostu · « **Reply #28 on:** February 22, 2013, 12:08 AM »

Quote from: Londonhellboy on February 22, 2013, 12:06 AM

Quote from: discostu on February 21, 2013, 11:32 PM
Terry what the fook are you talking about???
Any need for that?? Was I rude to you??

Unlike you, mid school to me didn't happen. 100% old school here

I wasn't being rude terry. How can you comment that midschool didn't happen. When you are posting in a thread about a midschool build? Come on lighten up pal!!

gary4130 · « **Reply #29 on:** February 22, 2013, 10:52 AM »

have always liked those stout boys

nice n light though-think framwe is about 8lbs

did you get it off jai?
might have to give him a pm

fugazi · « **Reply #30 on:** February 22, 2013, 12:16 PM »

Quote from: discostu on February 21, 2013, 11:32 PM

Quote from: Londonhellboy on February 21, 2013, 10:49 PM
Quote from: discostu on February 20, 2013, 09:49 PM
If not run a slightly smaller front sprocket like a 38 or 40t with a coaster at the rear to give a good ratio.
I wouldn't run a coaster Stu with such a small front ring. Coaster sprockets are normally 18T plus and with a 40T at the front, it would be like trying to ride a flatland setup.

I would try something like a Shimano DX hub at the rear Jaymz. Flip the sprocket inwards to move the chain away from the stay. They are normally 14T too so running a 40T at the front is okay with it.

Terry what the fook are you talking about???

I'm not talking about a coaster on a set of tuffs from the 80's mate.
I'm talking about a 90's freecoaster like a nankai, static or sym hub. These all run 16 down to 13 tooth rear sprockets mate. Come on son get with the mid school!!!

You can go down to a 10/11/12t with a Kore coaster cog, best to weld them on though

Jaymz · « **Reply #31 on:** February 22, 2013, 01:24 PM »

Yum yum, more parts in the post today

Wilkerson airlines San quentin bars
Nos in the box fishbone seatclamp
Micro adjust seat post

GavinDavis · « **Reply #32 on:** February 22, 2013, 03:18 PM »

Starting to take shape nicely now Jay

Ill be building mine when I get paid lol.

renegaderacer · « **Reply #33 on:** February 22, 2013, 03:53 PM »

This bike is going to look phat when it's done!

Can't believe I skipped through the mid-school era.

Gotta get mine done now!!

Jaymz · « **Reply #34 on:** February 23, 2013, 12:47 PM »

Been playing this morning in the man den, got lots done as you can see.
The one problem that was outlined badly by 2hip was the sat stays, well what this problem is the free wheel grinds on it, but by adding 3 washers it fixed the problem, but also meant it took a great deal of force to open the stays and get the rear wheel in, but it's done, the other problem with it is the 990 mounts are really too far towards the rear of the frame, in order for the blocks to be anywhere near the rim the wheel has to be a bit far back in the drops, but anyway, it's not like I'm going to be riding it in anger so alls good, here are some pics

Spec so far
Wilkerson San Quentin bars with Jive grips
Profiles 175
TNT 44t
Dc ad990
Seventies wheels

Just waiting on my headset, levers and pegs now

dordymush · « **Reply #35 on:** February 23, 2013, 12:58 PM »

lookin good mate.
everybodies gone 2hip mad.
mind im not complaining.its keeps em all away from the s&m stuff

Betty · « **Reply #36 on:** February 23, 2013, 12:58 PM »

Looking good so far

How fat is that downtube

deeman · « **Reply #37 on:** February 23, 2013, 01:03 PM »

Looks stunning

Jaymz · « **Reply #38 on:** February 23, 2013, 01:07 PM »

Quote from: dordymush on February 23, 2013, 12:58 PM

lookin good mate.
everybodies gone 2hip mad.
mind im not complaining.its keeps em all away from the s&m stuff

i do t think it replace my love for S&M fella

Quote from: Betty on February 23, 2013, 12:58 PM

Looking good so far

How fat is that downtube

its certainly no skinny old school effort

Quote from: deeman on February 23, 2013, 01:03 PM

Looks stunning

thank you, it's my mintiest build yet

GavinDavis · « **Reply #39 on:** February 23, 2013, 01:45 PM »

Thats looks the bomb Jay! Love it mate!

Jaymz · « **Reply #40 on:** March 01, 2013, 06:31 PM »

Managed to get a couple of hours in the man den this evening. Couple of small issues raised their heads

1. Supernatural forks need 2 layers of coke can shim to properly seat the crown race
2. 1" threadless 2Hip forks are nothing like 1"1/8 threadless forks see here for how to guide http://www.radbmx.co.uk/forum/index.php'topic=159098.0;topicseen
3. Top giro plate fouls the bottom of the stem
4. Once top plate has been ground down and sorted, giro doesn't work as there is no distance between the plates and the cables will not tension

garran · « **Reply #41 on:** March 01, 2013, 06:47 PM »

point 4 you might be able to shorten the cable by using knarp type things

Jaymz · « **Reply #42 on:** March 01, 2013, 06:49 PM »

Quote from: garran on March 01, 2013, 06:47 PM

point 4 you might be able to shorten the cable by using knarp type things

i almost shortened the whole Fooking bike with a big hammer,, had to down tools and come in for the evening!!

GavinDavis · « **Reply #43 on:** March 01, 2013, 06:53 PM »

Ive got a gyro on mine Jay? And so did Robbo? Have a look at our build threads and see if they look any different?

I know I used a beartrap 2 headset on mine if that helps?

GavinDavis · « **Reply #44 on:** March 01, 2013, 06:55 PM »

.....but then that was on a couple of big boys so maybe it differs slightly? The test pics show supernaturals with a gyro though?

Jaymz · « **Reply #45 on:** March 02, 2013, 12:30 PM »

Another couple of hours this morning and some more mods to the already modded frame, proper mid school this, nothing fits

So front hub rubs on peg bosses, need to space out forks with washers

Gyro sorted, but on max extension of the cables

Back wheel slammed almost to the end of thE dropouts otherwise brake won't reach the rim

No bolts for the peg mounts so pegs on axels for now

Acs rear calliper modded to fit front need pads as well and right calliper arm won't move

So still a bit to go before I can give it a good riding

And I weighed it, see pic below

Modded headset

Hub rubbage

And the winner is