Author Topic: NOS 2Hip Stout Boy :: FINISHED PAGE 4 (Read 13275 times)

Mdbh · « **Reply #1 on:** February 20, 2013, 07:20 PM »

Ding dong!!

fugazi · « **Reply #2 on:** February 20, 2013, 07:22 PM »

Very cool

nice to see a few more 2hip's getting about.

Munnyella · « **Reply #3 on:** February 20, 2013, 07:26 PM »

Quote from: Fugazi on February 20, 2013, 07:22 PM

Very cool nice to see a few more 2hip's getting about.

Its all down to subsidence in the warehouse, they've had to shift them!!!!

Nice though.

MM

Discostu · « **Reply #4 on:** February 20, 2013, 07:47 PM »

Nice bit of kit that jaymz. There is gonna be loads of 2hip builds at Mk at this rate.

Ron will be proud.

GavinDavis · « **Reply #5 on:** February 20, 2013, 08:12 PM »

Looking forward to seeing it built Jay

Jaymz · « **Reply #6 on:** February 20, 2013, 09:27 PM »

Cheers all
All the parts are coming together nicely forthis now, just have to shift my last two frames to pay for some of it

Discostu · « **Reply #7 on:** February 20, 2013, 09:34 PM »

Will this one be a keeper?

Jaymz · « **Reply #8 on:** February 20, 2013, 09:35 PM »

Oh I think so

WINI · « **Reply #9 on:** February 20, 2013, 09:37 PM »

Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

Jaymz · « **Reply #10 on:** February 20, 2013, 09:38 PM »

Quote from: WINI on February 20, 2013, 09:37 PM

Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

ummmmmmmmmm, no! I will find another way

Discostu · « **Reply #11 on:** February 20, 2013, 09:42 PM »

Quote from: WINI on February 20, 2013, 09:37 PM

Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

If it touches I would file the drop out slot towards the front a bit and run a half link. I didn't know there was a problem with this frame.

Jaymz · « **Reply #12 on:** February 20, 2013, 09:43 PM »

Quote from: discostu on February 20, 2013, 09:42 PM

Quote from: WINI on February 20, 2013, 09:37 PM
Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

If it touches I would file the drop out slot towards the front a bit and run a half link. I didn't know there was a problem with this frame.

the engineer at work is on standby with the milling machine!!!!

GavinDavis · « **Reply #13 on:** February 20, 2013, 09:46 PM »

Quote from: Jaymz on February 20, 2013, 09:43 PM

Quote from: discostu on February 20, 2013, 09:42 PM
Quote from: WINI on February 20, 2013, 09:37 PM
Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

If it touches I would file the drop out slot towards the front a bit and run a half link. I didn't know there was a problem with this frame.
the engineer at work is on standby with the milling machine!!!!

....Just add a couple of extra washers on the inside of the drops dude, thats the other option on the sheet

Jaymz · « **Reply #14 on:** February 20, 2013, 09:47 PM »

Quote from: gavindavis on February 20, 2013, 09:46 PM

Quote from: Jaymz on February 20, 2013, 09:43 PM
Quote from: discostu on February 20, 2013, 09:42 PM
Quote from: WINI on February 20, 2013, 09:37 PM
Nice J! So are you gonna grind the rear tube away so the chain doesn't rub?

If it touches I would file the drop out slot towards the front a bit and run a half link. I didn't know there was a problem with this frame.
the engineer at work is on standby with the milling machine!!!!
yeah mate will go for that option first, just spread the rear a bit for clearance

....Just add a couple of extra washers on the inside of the drops dude, thats the other option on the sheet

Discostu · « **Reply #15 on:** February 20, 2013, 09:49 PM »

Actually scrub that. I have just read about the problem on the 2hip site.
Apparently the front sprocket runs on the chainstay. But it was only a problem on one batch.
Lets hope yours is one of the good ones.

If not run a slightly smaller front sprocket like a 38 or 40t with a coaster at the rear to give a good ratio. But remember the chain needs to clear the ad990.

Jaymz · « **Reply #16 on:** February 20, 2013, 09:54 PM »

On the 2 hip site it mentions the chain wheel hitting frame, my bit of paper say the chain may hit the seat stays, so they must've had two sketchy batches with two different problems

Sid1972 · « **Reply #17 on:** February 20, 2013, 10:07 PM »

If it hits the seat stay, place a thin washer at the back of the chainring or disc depending on what your running. This will push it away from the seat stay by the thickness of whatever size washer you use. Done it before and it works.

P.S I like it..

Jaymz · « **Reply #18 on:** February 21, 2013, 10:29 PM »

Couple of pics of the forks married to the frame

dordymush · « **Reply #19 on:** February 21, 2013, 10:36 PM »

chromes a fooker to take a picture of aint it

.
lookin good though J.
what else is going on it ?.

GavinDavis · « **Reply #20 on:** February 21, 2013, 10:41 PM »

That looks spot on Jay!! Im getting excited to see this build already

Jaymz · « **Reply #21 on:** February 21, 2013, 10:42 PM »

Quote from: dordymush on February 21, 2013, 10:36 PM

chromes a fooker to take a picture of aint it .
lookin good though J.
what else is going on it ?.

chrome profiles, seventies wheels, San quentin bars, Oddy z77 seat, acs front brake, ad990 rear, fishbone seatclamp, TNT chain wheel

Stuck for levers, although got a pair of primos, tyres, got a set of amber wall white comp lll's just to try something different, grips Oddy power paw or some gt ones, pedals, got some nice sealed revel ones if need be