Author Topic: Where do I start?? (Read 3465 times)

FOUR1THREE0 · « **on:** February 12, 2013, 09:20 PM »

Right finally got them all home and for the first time all in one place! Had actually started forgetting what I owned!!

So question is now where do I start? I know a good start would be to actually start bolting stuff together instead of just taking pictures.

I have had a little go at the haf tonight, temporary wheels until I can find the set I had put together for this build, they seemed to have vanished!!

Does anyone know where I can get a grey khe lamello tyre?? Pulling my hair out

What do people think of the bash guard?? I know why would you need to have it with a grind disc but quite liked the look of it?

pickle · « **Reply #1 on:** February 12, 2013, 09:27 PM »

Nice collection! Nice 88 beat you got there

Jaymz · « **Reply #2 on:** February 12, 2013, 09:31 PM »

Sweet rides there fella, love those homeless frames

GavinDavis · « **Reply #3 on:** February 12, 2013, 09:49 PM »

Awesome collection!! Personally though.....That WAL Riot just looks out of place in the whole collection, its probably best knowing this that you sell it to me

Discostu · « **Reply #4 on:** February 12, 2013, 09:56 PM »

I see 2 wal's

Great collection. It will be nice to see them built up.

FOUR1THREE0 · « **Reply #5 on:** February 12, 2013, 10:00 PM »

Yeah I have missed my street beat! Love it, apart from the nicotine yellow bars!! Need to get them properly powdered. Also wanted one of those sharp bb boots, used to always see them for sale until i wanted one! You have two don't you? A red and an aqua one if I remember rightly? Really wanted a red one. Was going to buy one from Alan's a few years back but missed out.

Need to get that soul bro built! I love it. Got big plans for the pornstar but it will have to wait its last on the list at the mo.

Haha you will be the first to know mate. I am definitely sending the one against the back wall to the chromers. Was going to powder the other black and do an early one?

dordymush · « **Reply #6 on:** February 12, 2013, 10:38 PM »

if you ever wanna sell your HAF give me a shout mucka.
lovely collection of stuff you got there

.

fugazi · « **Reply #7 on:** February 13, 2013, 11:04 AM »

Nice pile of bits there

Not wanting to pish on Your chips but I think that HAF is actually a Prolite, a copy of the S&M. The V brake & cable stops give it away.

Dannywhac · « **Reply #8 on:** February 13, 2013, 11:15 AM »

Quote from: Fugazi on February 13, 2013, 11:04 AM

Nice pile of bits there Not wanting to pish on Your chips but I think that HAF is actually a Prolite, a copy of the S&M. The V brake & cable stops give it away.

X2 sadly - rear drops lookn wrong n'all. I know they made a shorter TT HAF for the eastern market, but still don't think they had canti's and cable-stop.

fugazi · « **Reply #9 on:** February 13, 2013, 11:30 AM »

I remember going upstairs in the old Cyclesport shop years ago & They had a built up One in Black with Prolite decals and One in Yellow, stickered up as a HAF, I said at the time "that's a bit naughty!" I don't think They had many made, it was a 'prototype' apparently.

An old Ride mag scan, not sure how well this will show up, I've got a better scanner now so could possibly do it better.

SaMAlex · « **Reply #10 on:** February 13, 2013, 11:34 AM »

The later HAFs had an S&M stamp on the back of the top tube, to make it clear which ones were real ones.

fugazi · « **Reply #11 on:** February 13, 2013, 11:38 AM »

Alex, do You know if S&M were not too bothered about the HAF getting cloned as the Sabbath was then coming out?

SaMAlex · « **Reply #12 on:** February 13, 2013, 11:52 AM »

I know they put the stamp on the frame to clear up any confusion. Im sure they didnt like the copy HAF frames.

I think S&M were used to it by then, what with companies buying "slam type" bars from the Far East catalogue and putting their own stickers on them.

Discostu · « **Reply #13 on:** February 13, 2013, 12:03 PM »

Personally I think you should build up one of the wal's. then sell the other to Gavin.

fugazi · « **Reply #14 on:** February 13, 2013, 12:12 PM »

Quote from: S&MAlex on February 13, 2013, 11:52 AM

I know they put the stamp on the frame to clear up any confusion. Im sure they didnt like the copy HAF frames.

I think S&M were used to it by then, what with companies buying "slam type" bars from the Far East catalogue and putting their own stickers on them.

As for the bars, I'll bet companies actually started up just to make them!

dordymush · « **Reply #15 on:** February 13, 2013, 12:50 PM »

you learn something every day

GavinDavis · « **Reply #16 on:** February 13, 2013, 01:01 PM »

Quote from: discostu on February 13, 2013, 12:03 PM

Personally I think you should build up one of the wal's. then sell the other to Gavin.

I think that is one of the bestest ideas on the whole of Rad

...if not....THE WORLD!

FOUR1THREE0 · « **Reply #17 on:** February 13, 2013, 07:30 PM »

Cheers for info guys,
Yeah I know the s&m is a bit of a weird one, apparently it was a special order with a 21.5 top tube cable guides and rear canti mounts.
The guy I bought it off got it with various other goodies from a guy that bought the entire old shop stock from i thought he said custom riders? But if it was cycle sports old stock then maybe it is a fake! Haha
It has no stamp on the rear is there anything else I can identify it on?? I have just had issue 10 out of ride 'fat bikes' and drop outs look the same also gusset and platform etc.
He did tell me that all haf's were produced in chrome and then over powdered. This one definitely has as a little bit of yellow flaked of when I put the bb in. It's a really nice job and the thickest powder coat I have ever seen.
I think the guy I bought it off is on here?? He is definitely on bmx museum as this very frame is on there. I will go and check it out.

FOUR1THREE0 · « **Reply #18 on:** February 13, 2013, 07:37 PM »

Guys name in the museum is radror

Dannywhac · « **Reply #19 on:** February 13, 2013, 07:40 PM »

Deffo check it out. The drops are a slightly different to a HAFs - also mine's original yellow, and it's not chrome underneath.

Here's mine for reference - pop a piccy up of your drops

fugazi · « **Reply #20 on:** February 13, 2013, 08:04 PM »

Quote from: FOUR1THREE0 on February 13, 2013, 07:30 PM

Cheers for info guys,
Yeah I know the s&m is a bit of a weird one, apparently it was a special order with a 21.5 top tube cable guides and rear canti mounts.
The guy I bought it off got it with various other goodies from a guy that bought the entire old shop stock from i thought he said custom riders? But if it was cycle sports old stock then maybe it is a fake! Haha
It has no stamp on the rear is there anything else I can identify it on?? I have just had issue 10 out of ride 'fat bikes' and drop outs look the same also gusset and platform etc.
He did tell me that all haf's were produced in chrome and then over powdered. This one definitely has as a little bit of yellow flaked of when I put the bb in. It's a really nice job and the thickest powder coat I have ever seen.
I think the guy I bought it off is on here?? He is definitely on bmx museum as this very frame is on there. I will go and check it out.

I'm 99.9% that's the Prolite frame I checked out in Cyclesport, even down to the oversize cable stop & welded on noodle on the t/t. S&M didn't make frames in house back then so the chances of getting a custom done was slim I would have thought. Painted S&M's were bare metal underneath as well. I'm sure Alex can clear this One up though

Dannywhac · « **Reply #21 on:** February 13, 2013, 08:13 PM »

Radror is Rory on here:

http://www.radbmx.co.uk/forum/index.php?action=profile;u=1579

He originally got that frame from Generallee (Steve), maybe give Steve a pm and get the history behind it. I'm sure there was no intention when you got it of any funny business - sound blokes

harris · « **Reply #22 on:** February 13, 2013, 08:17 PM »

nice collection,i have a homeless mack mk1 and later edition mack like the player era plus a pornstar and player
selling them all if you want a near full set.

fugazi · « **Reply #23 on:** February 13, 2013, 08:20 PM »

Quote from: dannywhac on February 13, 2013, 08:13 PM

Radror is Rory on here:

http://www.radbmx.co.uk/forum/index.php?action=profile;u=1579

He originally got that frame from Generallee (Steve), maybe give Steve a pm and get the history behind it. I'm sure there was no intention when you got it of any funny business - sound blokes

Better off getting hold of Steve, Rory hasn't been on in over Three years!

Mdbh · « **Reply #24 on:** February 13, 2013, 09:19 PM »

Man I want a haf!!! The only s&m I'd ever buy!!

Author Topic: Where do I start?? (Read 3465 times)

FOUR1THREE0

FOUR1THREE0

SaMAlex

SaMAlex

FOUR1THREE0

FOUR1THREE0

Mdbh