Author Topic: Tioga/Tange Rhino 3 FINISHED, few last pics! (Read 18240 times)

djgivvinup · « **Reply #25 on:** June 19, 2011, 08:14 PM »

Quote from: TELLIS302000 on June 19, 2011, 05:13 AM

Its just a survivor, polished it up a bit and some new decals.

Tis very nice that mate

bobafett · « **Reply #26 on:** June 19, 2011, 11:24 PM »

I like that, reckon a set of gold pedals and an MX seat would finish it off

TELLIS302000 · « **Reply #27 on:** June 20, 2011, 03:44 PM »

Quote from: monkian on June 18, 2011, 08:24 PM

dib dobs

Seriously A, it's a beautiful thing. As you know, it's right up my street
Great job but I'd just see if you can get that seat back over the guts a bit more.

If you ever decide to move it on I'll look forward to your PM

seat does go back some more but it tends to force the seat out of shape at the sides which i dont want to do to my refurbed kashi!!!

Any ideas?

Slight layback possible.....

rick1970 · « **Reply #28 on:** June 20, 2011, 08:37 PM »

Not sure where in the range of rhinos this fell in but heres my rhino pro from late 84/5 bitd ,heres some pics

oh and no negative comments on fashion please

heywood track 1984

monkian · « **Reply #29 on:** June 20, 2011, 08:58 PM »

Cool OS pics rick

Is that a small head-tube / down-tube gusset on there?

rick1970 · « **Reply #30 on:** June 20, 2011, 09:02 PM »

Quote from: monkian on June 20, 2011, 08:58 PM

Cool OS pics rick
Is that a small head-tube / down-tube gusset on there?

that it is mate

couple more pics added one with me mate on his supergoose wearing se racing top

monkian · « **Reply #31 on:** June 20, 2011, 09:16 PM »

Different forks maybe but it looks pretty close to this: http://bmxmuseum.com/bikes/falcon/37941
A rebadged Falcon Pro maybe

rick1970 · « **Reply #32 on:** June 20, 2011, 09:25 PM »

It does look very similar, mine was bought as a f+f set and we just chucked it together, i cant tell from your pics but if i remember rightly it had about three holes on each side of the gusset has yours the same ? seams these tange frames got about a bit

monkian · « **Reply #33 on:** June 20, 2011, 10:02 PM »

Yeah, when it comes to Tange, it's tricky knowing for sure what's what

The one in the museum isn't mine but on the blown-up image it looks like it's got the 3 holes in the small HT gusset.
Not sure these were Tange though. Seat-tube decal has Taiwan BDC?? Hi-Ten

So could be Akisu made: http://bmxmuseum.com/bikes/sekai/8372

I only know of a couple of Tange frames with that type of gusset:
http://bmxmuseum.com/bikes/tange/45000
http://bmxmuseum.com/bikes/sekai/14520

See what I mean

I'm loving the pics. Where is/was that track?

TELLIS302000 · « **Reply #34 on:** June 20, 2011, 10:05 PM »

Nice pics man!

Frankie says 'relax' eh..... hehe

rick1970 · « **Reply #35 on:** June 20, 2011, 10:32 PM »

Quote from: TELLIS302000 on June 20, 2011, 10:05 PM

Nice pics man!

Frankie says 'relax' eh..... hehe

dont do it

lovin the rhino mate well done

the track still exist its in Heywood near Rochdale/Manchester an awsome circuit undergone a lot of work recently so pay a visit when you get chance

bobafett · « **Reply #36 on:** June 20, 2011, 10:49 PM »

Cool pics Rick, like the track - wish Coppull was as mellow......

TELLIS302000 · « **Reply #37 on:** June 21, 2011, 02:09 AM »

Quote from: rick1970 on June 20, 2011, 10:32 PM

Quote from: TELLIS302000 on June 20, 2011, 10:05 PM
Nice pics man!

Frankie says 'relax' eh..... hehe

dont do it lovin the rhino mate well done

the track still exist its in Heywood near Rochdale/Manchester an awsome circuit undergone a lot of work recently so pay a visit when you get chance

cheers mate.

Might have a nosey at that track....in the daytime when there's nobody on it!!!

A

TELLIS302000 · « **Reply #38 on:** June 21, 2011, 12:50 PM »

Quote from: hiro tonka on June 21, 2011, 08:25 AM

I bought the one recently on Ebay

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160599111244

It came with a Shot Gun II seat with Falcon stamped on the back and so mine must have been sold as a Falcon.
Looks like your Falcon decals probably were the original ones then

Cheers
Steven

haha, we were wondering who bought that!

You gonna be putting the Falcon decals back on though?

Whats it like the Rhino? Has the rust come off?

monkian · « **Reply #39 on:** June 21, 2011, 01:20 PM »

Cool, get some pics up

TELLIS302000 · « **Reply #40 on:** June 22, 2011, 01:02 AM »

Quote from: hiro tonka on June 21, 2011, 01:15 PM

Well I originally wanted it basically for the wheels crank/BB and headset which are heading straight on my Mk1 Pro Burner .

But it's a nice little bike and a project for the future. Tange Seiki bottom bracket, Sugino cromo crank dated 83, shot gun II seat, Tange seat clamp, fluted straight seat post, orig CW large bars.

Nearly all the rust has come off, a couple of areas will need a soak and the chrome on the seat post is buggered so that will need a rechrome at a later date as will the bars.

It'll be stickered with the Rhino 3 decals , as the Falcon ones don't do the quality of the F+F justice. Even the forks have a weird tappering.

Steven

decals from this man

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=250841567668&ssPageName=STRK:MEWAX:IT

TELLIS302000 · « **Reply #41 on:** June 22, 2011, 07:41 PM »

Quote from: hiro tonka on June 22, 2011, 11:45 AM

Thanks for the info on the decals,

I've a couple of other builds on the go so I'll be tackling the Rhino prob next year.

Hope it turns out as sweet as yours

Thanks matey!

sturge · « **Reply #42 on:** June 23, 2011, 11:11 AM »

This has turned out lovely

Never heard of these bitd where i lived, council estate kid ya see

Looks

Great work

Cheers,

Paul.

TELLIS302000 · « **Reply #43 on:** June 25, 2011, 02:13 PM »

Thanks for all the comments, appreciated.

Few alterations to do then a final piccy will go up.

Antony

TELLIS302000 · « **Reply #44 on:** July 15, 2011, 12:46 PM »

Few new photos of now finished bike.

Alterations: Maxy Cross out for a Sugino GT, DC MX1000 swapped for a 900, Layback post, KKT AMX's, Flite padset!

Cheers.