PK Ripper Seat Post Diameter

[Rossi46]

Hi folks. Just a quick one. Should a 22.2mm seatpost fit an early 80's loopy ripper 

[glenboy]

the size is 13/16 ths of an inch which in new money is 20.63mm , they are slightly smaller than normal diameter uni seats did em for them but you want 13/16ths is the size you want

[Rossi46]

Thankyou glenboy 

[58 delray]

SE, Race Inc, Murray, strong and a few others all made 13/16 seat posts that will fit a loopy, make sure you have at least 5" inserted into the seat tube as it can cause cracking/snapping issues other wise  

[Rossi46]

SE, Race Inc, Murray, strong and a few others all made 13/16 seat posts that will fit a loopy, make sure you have at least 5" inserted into the seat tube as it can cause cracking/snapping issues other wise  

Good tip and thankyou once again. I generally like my posts pretty low anyway. I'm not a fan of the 'high' seatpost look. Just personal preference 

[kungfunky]

Don't bother looking for a 13/16 layback post though. Not to be used on a Ripper 

[pickle]

yeah, you want a layback with the brace........

[pickle]

won't an Elina snake post combo fit?     

[58 delray]

Don't bother looking for a 13/16 layback post though. Not to be used on a Ripper 

what ash says ^^^^^^^ frame will snap if you do 

[58 delray]

won't an Elina snake post combo fit?     

nope, thank fook 

[kungfunky]

won't an Elina snake post combo fit?     

They only fit on streetbeats Rob 

[pickle]

   not on any of mine they fooking don't!   

[58 delray]

  not on any of mine they fooking don't!   

 

[kungfunky]

  not on any of mine they fooking don't!   

No taste thats your problem 

[stidds]

Don't bother looking for a 13/16 layback post though. Not to be used on a Ripper 

what ash says ^^^^^^^ frame will snap if you do 

They will fooking snap anyway so put any seatpost you want on it 

Only kidding (about the any seatpost, not about the fact it will snap anyway). 

[pickle]

 

[kungfunky]

Blaaa blaaa blaaaa bloody mods picking on the mortals bikes 

[58 delray]

Blaaa blaaa blaaaa bloody mods picking on the mortals bikes 

 

[Badbaldie]

rippers only snap if you have the post  to high or your clumsey or of course u use a layback

[stidds]

rippers only snap if you have the post  to high or your clumsey or of course u use a layback

Or you breathe too heavy on them   

[kungfunky]

rippers only snap if you have the post  to high or your clumsey or of course u use a layback

Or you breathe too heavy on them   

Speaking of heavy breathing, stop phoning my missus please pal