gfxgfx
 
logo
 
gfx gfx
gfx
975805 Posts in 138943 Topics by 6363 Members - Latest Member: V6 DOW November 23, 2024, 07:55 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  JMC DY/AP
gfx
gfxgfx
 

Author Topic: JMC DY/AP  (Read 13167 times)

0 Members and 3 Guests are viewing this topic.

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
JMC DY/AP
« on: December 30, 2012, 09:49 PM »
It wasn't until I saw one of these  framesets in the flesh  that I realised their class and would one day have to have one  :angel:

From looking in mags when I was a kid and then getting  into O/S I completed most of the grail bikes I set out to do and more .

But because I wasn't racer back then, the Darrell Young wasn't at the top of my to do list ,

 however a good few old mates ,who were racers held these at the very top of the must have bikes  :4_17_5:

Since seeing them up close and studying their detail , I realised how fantastic they really are .

Influences from Hutch , GT, T/A, Quad, Bottema  :smitten:

The oversized downtube  :coolsmiley: the straight through top tube (with JMC sheild stamping)  :coolsmiley: :coolsmiley:

Cranked widening seat stays down to great sweeping looptail with big dropouts  :smitten:

and to top it all this set up came with an AWESOME upgrade a  pair of  rarer Andy Patterson Forks  :shocked:

Tear drop tubing  :smitten: straight through Bottema-esque with a bologna slash cut like LG;s

This frameset takes the best bits off other beautiful framesets and brings them altogether  :4_17_5:


This is the first incarnation of this build and I will ventually re post a revised build later in the year

Darryl Young and Andy Patterson actually rode with a 1st gen DK pro XL stem and I have one on it's way from the States

Not sure whether to fit this with a set of NOS MKS GrafightX  I have to go with the Graphite Tuffs

Not sure whether to go Candy red frame and re chrome the AP forks or chrome frame  :-\

Black 2nd gen frame pads too  :)


but here it is current spec  :)


1985 JMC Darryl Young frame
1985 JMC Andy patterson forks
JMC Darryl Young bars
NOS Bubble font A'me round grips
Original Hutch Deep H stem ( to be replaced with 2nd gen stamped square edged DK Pro XL stem)
Original JMC 2nd gen padset
1984 Skyway Graphite 3rd gen Tuff wheels
1984 NOS Michelin/IRC  Competition 1.75 tyres
NOS Bullseye 2 piece cranks and spider with NOS Sugino 44T
Original Brown bearing Hutch beartrap pedals
NOS Shotgun 1 seat How often do you see these
Dia compe MX 900 with  DC MX123 lever and 1985 stamped DC cable
Gold and black ESH Izumi track chain
Tange 320 headset
























































































Thanks to J.T, Bodamus ,J.T Smooth ,Deeman ,Rooski,Diggler,Tobias,Neil Clark ,Spartacus,Spencer,Johann

« Last Edit: December 30, 2012, 10:32 PM by Hunterdubber »

Offline Twesnik

  • Site Supporter
  • Cherry Picker
  • *
  • Posts: 828
  • Rated:
Re: JMC DY/AP
« Reply #1 on: December 30, 2012, 10:02 PM »
Stunning!
Without a doubt......
 8)

Offline Jaymz

  • Team RAD
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • I'm not FOOKING Dave
  • Rated:
Re: JMC DY/AP
« Reply #2 on: December 30, 2012, 10:06 PM »
Awesome, I really like the colour it is now

Offline Kaner

  • Cherry Picker
  • ****
  • Posts: 979
  • Rated:
Re: JMC DY/AP
« Reply #3 on: December 30, 2012, 10:14 PM »
Christian that is one sweet build.

Those forks are just sex, the most awesome forks ever, nicer than Bottema even. Just fabulous.  The Frame and large JMC DY bars are brilliant. Good to see some different tyres as well.

If you were going to change it I was to vote for Candy Red and Chrome forks and would like to see what it looks like on spokes too.

Fookin Lovely.

Offline steve69

  • Flip-Whip
  • ******
  • Posts: 1972
  • aka. Steve Changa
  • Rated:
Re: JMC DY/AP
« Reply #4 on: December 30, 2012, 10:14 PM »
That's a fast looking ride  ^"^

and yes they are one of the best looking forks made for sure :smitten:



(candy blue would be nice  :-X)
If there's air in the tyres... it's a rider

Offline CustardLips

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 7314
  • Rated:
Re: JMC DY/AP
« Reply #5 on: December 30, 2012, 10:22 PM »
That's real nice.  :smitten:
"Every year is getting shorter, never seem to find the time"

"WWG1WGA"

Offline willo73

  • Curb Endo
  • **
  • Posts: 425
  • Rated:
Re: JMC DY/AP
« Reply #6 on: December 30, 2012, 10:28 PM »
That is stunning  :smitten:  8)

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Re: JMC DY/AP
« Reply #7 on: December 30, 2012, 10:28 PM »
As always with your builds Chris they are TOP NOTCH and this is no exception. Class all the way buddy  :4_17_5:

Is that a standard colour ? it looks fantastic  :)
WANTED....FRED BLOOD QUADANGLE FRAME..

(((sonic)))

  • Guest
Re: JMC DY/AP
« Reply #8 on: December 30, 2012, 10:30 PM »
Beautiful Christian, simply stunning

Stinks of class.....

Have you thought about running a browning two speed? Only reason I ask is that I see a few being built with the browning lately.....

B

matt

  • Guest
Re: JMC DY/AP
« Reply #9 on: December 30, 2012, 10:40 PM »
You've gotta love JMC,  that looks great but spokes would improve it IMHO.   :daumenhoch:

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #10 on: December 30, 2012, 10:45 PM »
Beautiful Christian, simply stunning

Stinks of class.....

Have you thought about running a browning two speed? Only reason I ask is that I see a few being built with the browning lately.....

B

Yeah Darryl Young used to run a Browning set up  :coolsmiley:

Seen here two speed chainring and rear shifter  :smitten:





I have actually had the pleasure of riding  a Browning  on a Maximum Pro belonging to Andy Bigplinky , it was dialled and rode amazing  :4_17_5:


Originally I was going to go more DY  style at first  with the spokes , but because of the AP twist went for graphite Tuffs , I here you MattSky but I think it looks good a little different than the crowd this time round .

Who knows , by the time I've re done it I may change for Sherrif record C's on 7L's ( the hubs were produced 1985 to 1991 which means they'd just about go on this build  era correct )

If I get that set up it'll be the best of both worlds  :daumenhoch:


Thanks for the kind words Radlads  :-*
« Last Edit: December 30, 2012, 10:57 PM by Hunterdubber »

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #11 on: December 30, 2012, 10:56 PM »
I had most of the bits before I even thought I was getting the frameset

but I saw  another with the same cranks and in Candy red  and rolling on Graphs :smitten:


That sealed it for me



Offline Devilock

  • Berm Worm
  • ***********
  • Posts: 8094
  • ●|●|●
  • Rated:
Re: JMC DY/AP
« Reply #12 on: December 30, 2012, 11:01 PM »
Very nice indeed Chris... :daumenhoch:

I like the decision to use Tuffs due to the AP forks.

Dont think Ive seen those seats before!  :shocked:  8)

 :4_17_5:

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: JMC DY/AP
« Reply #13 on: December 30, 2012, 11:08 PM »
i know there rare and lovely cranks..............but i dont like em on this for some reason.
the rest of its  8).
i like the silver. makes a change  :daumenhoch:
dave the bmxing gypo


scary_leary

  • Guest
Re: JMC DY/AP
« Reply #14 on: December 30, 2012, 11:15 PM »
That looks spot on Chris..  :daumenhoch:

Offline stu27

  • 900 Air
  • ********
  • Posts: 3735
  • Rated:
Re: JMC DY/AP
« Reply #15 on: December 30, 2012, 11:23 PM »
stunning christian :smitten:
cracking build
It wasn't until I saw one of these  framesets in the flesh  that I realised their class and would one day have to have one  :angel:

FROM LOOKING IN MAGS WHEN I WAS A KID


what type of mags??
negativity is for chumps,positivity is for champs

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #16 on: December 30, 2012, 11:26 PM »
Thanks for the comments  :4_17_5:

No worries Davey man  :daumenhoch: , again everything on the bike is race orientated ( hence the graphs , Skyway race team spec )

The Bullseyes are on instead of flights or profiles ,I love em and not seen on every other build

,but  actually Darryl Young himself rode a one piece Takagi on alot of early pics   :) ,  JJ Baldbmxer built his  lovely DY op with a one piece  8)

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: JMC DY/AP
« Reply #17 on: December 30, 2012, 11:32 PM »
i was gonna say a opc would look the bolloxs on it but thought you'd laugh  ;D
dave the bmxing gypo


Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #18 on: December 30, 2012, 11:37 PM »
As always with your builds Chris they are TOP NOTCH and this is no exception. Class all the way buddy  :4_17_5:

Is that a standard colour ? it looks fantastic  :)

Thanks Ash
It's a cool colour and the finish is amazing , but it's not standard and that;s why I have no issues about changing it to Candy Red to keep it standard  :4_17_5:  :angel:

Sometimes it can be good to have a slightly custom twist  or a deviation from the norm , but expect a little criticism

 I dare n't do owt custom or daring  :crazy2:  :-[  :LolLolLolLol:   but admire those who do ,  do it well  ,,and pull it off  :-*  :D




They produced the Darryl Young in Chrome ,Candy red or white only

They made the Andy patterson in Chrome or white only

Steve 69 mentioned  re doing it in Candy Blue  :)

Mattskybeat did a Candy blue one it was lovely but not standard  :smitten:





« Last Edit: December 31, 2012, 10:57 AM by Hunterdubber »

Offline Dark Diggler

  • Berm Worm
  • ***********
  • Posts: 12607
  • Rated:
Re: JMC DY/AP
« Reply #19 on: December 30, 2012, 11:42 PM »
Not had it 5 minutes and you fooked it up. Fookin Tuppafookinbastardware wheels, with 27.7 carat gold hubs :wtf:



Last time I let your schlomo loose in the inner sanctum  :yahoo_silent:
Whats the matter Kid, don't ya like clowns? Don't we make you laugh? Aint we fukkin funny?

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #20 on: December 30, 2012, 11:45 PM »
Not had it 5 minutes and you fooked it up. Fookin Tuppafookinbastardware wheels, with 27.7 carat gold hubs :wtf:



Last time I let your schlomo loose in the inner sanctum  :yahoo_silent:


 :LolLolLolLol: :LolLolLolLol: :LolLolLolLol:

Suck my balls Kanye  :tickedoff:



Tupperware  :4_17_5:
« Last Edit: December 30, 2012, 11:47 PM by Hunterdubber »

Offline Dark Diggler

  • Berm Worm
  • ***********
  • Posts: 12607
  • Rated:
Re: JMC DY/AP
« Reply #21 on: December 30, 2012, 11:47 PM »
Lick my gooch goldstein.
Whats the matter Kid, don't ya like clowns? Don't we make you laugh? Aint we fukkin funny?

Offline Jaan

  • Tail Whip
  • **********
  • Posts: 5263
  • A.K.A. Chris
    • AlphaPunk
  • Rated:
Re: JMC DY/AP
« Reply #22 on: December 30, 2012, 11:51 PM »
Without doubt a stunning bike but +1 to running spokes if only from an aesthetic point of view  :smitten:

Offline hunterdubber

  • Site Supporter
  • Berm Worm
  • *
  • Posts: 13121
  • Rated:
Re: JMC DY/AP
« Reply #23 on: December 30, 2012, 11:54 PM »
i was gonna say a opc would look the bolloxs on it but thought you'd laugh  ;D



Nah Dave you can build any O/S BMX in the world with a one piece and it looks right   :4_17_5:


Cheap  :crazy2:  , but right   :LolLolLolLol:

 :daumenhoch: :daumenhoch: :daumenhoch:






Here's the man  with OPC and style  :coolsmiley:













bof

  • Guest
Re: JMC DY/AP
« Reply #24 on: December 30, 2012, 11:59 PM »
What year did 6 spoke skyways come out ? They would look mint

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  JMC DY/AP
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal