Author Topic: S&M Bennett build NEW PICS 30/12 nearly finished (Read 7771 times)

Jaymz · « **on:** December 04, 2012, 07:47 PM »

Just purchased this as a winter project, love a bit of heavy metal, should be with me shortly

Has a quick play tonight

Dragonfly seat clamp
Oddy cobra seat
Fsa pig dh pro sealed headset
Oddy 41 thermal forks
S&m redneck stem

All parts tatty apart from the seat clamp and seat

Been playing with sprockets and bars today, knee savers look great but are so cut down its unreal, got some chrome slams coming soon to try, I just can't seem to make up my mind on the bits

So far

FSA the pig dh pro headset
Redneck stem
DNA set clamp
Odyssey cobra seat
Seventies hubs laced to seventies branded Alex rims
Jive grips and donuts
Wethepeople royal cranks
Primo tenderizers
Dc ad990
Dc lever

And sub 25lbs without tyres

All suggestions greatly appreciated

Almost there, swapped out all the shiny parts for black ones, black rod seatpost, black evo brake, black wheels ( which i think weigh more than the rest of the bike ) just need to spray the stem, it's so black and raw it looks almost evil

Spec
Kriss Bennett frame
Odyssey thermal forks
DK bars
Redneck stem
The pig dh pro headset
Wethepeople royal cranks
Primo tenderiser pedals
Xposure bash guard chain wheel
Jive grips and donuts
Sun ZX25 rim laced to sealed formula hub with a snafu tyre
Alex Supra J laced to a sealed prolite stealth hub with a odyssey path tyre and acs claws freewheel
DNA seat clamp
Odyssey cobra seat
Odyssey evo brake
Primo rod seatpost
Dc lever

Discostu · « **Reply #1 on:** December 04, 2012, 09:27 PM »

dordymush · « **Reply #2 on:** December 04, 2012, 10:14 PM »

nice

.
is that the one glen had ?.

midschooljon · « **Reply #3 on:** December 04, 2012, 10:34 PM »

Yes that looks like Glens old one. Looking forward to seeing this one come together.

Jaymz · « **Reply #4 on:** December 05, 2012, 06:41 AM »

I've picked it up from a bike shop in Scotland so it's been around the country a bit. I thought it was glens old pne

john4130 · « **Reply #5 on:** December 05, 2012, 06:57 AM »

so your the one going round stealing our national treasures.

GavinDavis · « **Reply #6 on:** December 05, 2012, 07:38 AM »

Nice one Jay....Looking forward to seeing the build!

sparkysx · « **Reply #7 on:** December 05, 2012, 03:37 PM »

chunky!

gib66 · « **Reply #8 on:** December 05, 2012, 03:43 PM »

quite like these frames i love the decals too needs to stay rough ready and unpainted as is in my view though

Jaymz · « **Reply #9 on:** December 05, 2012, 07:01 PM »

Quote from: gib66 on December 05, 2012, 03:43 PM

quite like these frames i love the decals too needs to stay rough ready and unpainted as is in my view though

I only build riders Greg , so rough and ready all the way

Jaymz · « **Reply #10 on:** December 17, 2012, 05:49 PM »

Arrived today.

Serial number SMBKO140 anyone decode that for me

Dannywhac · « **Reply #11 on:** December 17, 2012, 07:20 PM »

Think J it's from the first run of em (although someone else can pipe if I'm wrong

). Second lot were made by Kastan (they have Kastan stamped on the inner drops), and did the third lot have 14mm rear drops?

Jaymz · « **Reply #12 on:** December 17, 2012, 07:22 PM »

Quote from: dannywhac on December 17, 2012, 07:20 PM

Think J it's from the first run of em (although someone else can pipe if I'm wrong ). Second lot were made by Kastan (they have Kastan stamped on the inner drops), and did the third lot have 14mm rear drops?

Mine has nothing on the drops and they are 14mm , the serial is on the bb shell

Just got some WTP cranks for thiS in a nice rider condition

Dannywhac · « **Reply #13 on:** December 17, 2012, 07:29 PM »

Quote from: Jaymz on December 17, 2012, 07:22 PM

Quote from: dannywhac on December 17, 2012, 07:20 PM
Think J it's from the first run of em (although someone else can pipe if I'm wrong ). Second lot were made by Kastan (they have Kastan stamped on the inner drops), and did the third lot have 14mm rear drops?
Mine has nothing on the drops and they are 14mm , the serial is on the bb shell

Just got some WTP cranks for thiS in a nice rider condition

Third lot then J

Saw them WTP - very nice, good alternative to the old Profiles

Jaymz · « **Reply #14 on:** December 17, 2012, 07:33 PM »

Yup and best of all cheap cheap, all I need is a set of 14-10mm reducers for the rear drops now and I've got all the bits to build her up

webbie · « **Reply #15 on:** December 17, 2012, 07:45 PM »

Munnyella · « **Reply #16 on:** December 17, 2012, 08:13 PM »

Quote from: Jaymz on December 17, 2012, 07:33 PM

Yup and best of all cheap cheap, all I need is a set of 14-10mm reducers for the rear drops now and I've got all the bits to build her up

Got a pair of the washer type reducers if you want them Jaymz, PM your addy, i'll drop them in a box tomrrow.

MM

Jaymz · « **Reply #17 on:** December 17, 2012, 08:14 PM »

Quote from: munnyella on December 17, 2012, 08:13 PM

Quote from: Jaymz on December 17, 2012, 07:33 PM
Yup and best of all cheap cheap, all I need is a set of 14-10mm reducers for the rear drops now and I've got all the bits to build her up

Got a pair of the washer type reducers if you want them Jaymz, PM your addy, i'll drop them in a box tomrrow.

MM

They're the ones. Cheers mr mun

Jaymz · « **Reply #18 on:** December 21, 2012, 06:39 PM »

Dragonfly seat clamp
Oddy cobra seat
Fsa pig dh pro sealed headset
Oddy 41 thermal forks
S&m redneck stem

All parts tatty apart from the seat clamp and seat

Jaymz · « **Reply #19 on:** December 29, 2012, 02:43 PM »

Been playing with sprockets and bars today, knee savers look great but are so cut down its unreal, got some chrome slams coming soon to try, I just can't seem to make up my mind on the bits

So far

FSA the pig dh pro headset
Redneck stem
DNA set clamp
Odyssey cobra seat
Seventies hubs laced to seventies branded Alex rims
Jive grips and donuts
Wethepeople royal cranks
Primo tenderizers
Dc ad990
Dc lever

And sub 25lbs without tyres

All suggestions greatly appreciated

Dannywhac · « **Reply #20 on:** December 29, 2012, 02:48 PM »

The Xposure sprocket and the DK bars J I reckon (bars matching forks/sprocket)

You got a Primo hemorrhoid seat kicking round? - although the Cobra's good, think it's a tad mid-mid school if that makes any sense

Jaymz · « **Reply #21 on:** December 29, 2012, 02:50 PM »

Quote from: dannywhac on December 29, 2012, 02:48 PM

The Xposure sprocket and the DK bars J I reckon (bars matching forks/sprocket)

You got a Primo hemorrhoid seat kicking round? - although the Cobra's good, think it's a tad mid-mid school if that makes any sense

and a blck primo rod seatpost and black Oddy evo brake? I can do that

No primo saddles, just a nos dk drop nose and a z77

dordymush · « **Reply #22 on:** December 29, 2012, 02:53 PM »

lookin better now the wheels are on.
i'd get a tin of satin black and give ya redneck a nice coat to match it up.

you dont wanna sell that bar pad in the back ground do ya

Dannywhac · « **Reply #23 on:** December 29, 2012, 02:55 PM »

Quote from: Jaymz on December 29, 2012, 02:50 PM

Quote from: dannywhac on December 29, 2012, 02:48 PM
The Xposure sprocket and the DK bars J I reckon (bars matching forks/sprocket)

You got a Primo hemorrhoid seat kicking round? - although the Cobra's good, think it's a tad mid-mid school if that makes any sense
and a blck primo rod seatpost and black Oddy evo brake? I can do that

No primo saddles, just a nos dk drop nose and a z77

Pop me your addy again J - I'll pop something in the post for you next week

Dordy - did you get that package I sent you?

Jaymz · « **Reply #24 on:** December 29, 2012, 02:58 PM »

Quote from: dordymush on December 29, 2012, 02:53 PM

lookin better now the wheels are on.
i'd get a tin of satin black and give ya redneck a nice coat to match it up.

you dont wanna sell that bar pad in the back ground do ya

the one that's adorning the bars in the later picture, or the stem pad?

Yeah gotta get some spray for the forks so the stem can be done too, all I've done is sand all the paint off it do far