What the hell will get powder off?

[adenough]

ive tried paint stipper, blow torch, caustic soda $ sulphic acid.  ive some how managed to get a layer of what seems to be plastic coating, but underneath it still wont budge, im chuckin rattles all over the place....HELP   

[wildon]

gasket remover 

[thebigdog]

http://www.radbmx.co.uk/forum/index.php'topic=54500.0

in the sticky section 

[adenough]

gasket remover, interesting, thanks ive removed powder with nitromoors in the past, but under the plastic layer, it does seem to be like a glued on rubber substance, like a gasket 

[stidds]

Not all gasket removers will work, I know Permatex will but you may have to experiment.

[adenough]

cheers

[adenough]

my local shop has in stock somethin called 'GET YOUR GASKET OFF' says its strong and in a spray, does anyone think its worth a go?   

[dordymush]

i always use a heat gun and a sharp blade to get any real hard powder off.
takes ages but it comes off.

[animal]

I must be a loon then  I have used Oxy/actelene before  have also used a wire wheel on a drill or grinder . But make sure u use goggles cos the wire is foookin dangerous if it ends up in ur eyes 

[superbikedan]

 

 http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

[stidds]

 http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. 

[bobbbbsy]

carb cleaner- halfrauds ! 

[ED209]

 http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

RADs Deja Vu question  

Dan's right of course  

[superbikedan]

 http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. 

i honestly give up, i probs strip  2 to 300 frames a year but wtf do i know

[Devilock]

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. 

 

Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you!  

[ED209]

 http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. 

i honestly give up, i probs strip  2 to 300 frames a year but wtf do i know

Q. What the hell will get powder off?
A. Dan

 

[bobbbbsy]

i thought you had to loose the chrome to pc .. can you just go over the top ? 

[stidds]

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough. 

 

Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you!  

I have stopped bothering these days Rich, makes me laugh though when somebody asks the spoke length question, gets rubbish advice from people and then 2 weeks later up pops a thread asking why the spokes they have bought are too long.

[bobbbbsy]

its why i ll send my next wheels to you boys ! 

[adenough]

ooo a spoke tangent , & cheers Dan !!

[deeman]

Reminds me of 'which brake pads do i use on tuffs question!

[Jt]

i heard romblokes breath will have it back to bare metal in less than six sentences.....

[CustardLips]

What's a looptail ?