Author Topic: What the hell will get powder off? (Read 2201 times)

adenough · « **on:** November 21, 2012, 01:04 PM »

ive tried paint stipper, blow torch, caustic soda $ sulphic acid. ive some how managed to get a layer of what seems to be plastic coating, but underneath it still wont budge, im chuckin rattles all over the place....HELP

wildon · « **Reply #1 on:** November 21, 2012, 01:06 PM »

gasket remover

thebigdog · « **Reply #2 on:** November 21, 2012, 01:06 PM »

http://www.radbmx.co.uk/forum/index.php'topic=54500.0

in the sticky section

adenough · « **Reply #3 on:** November 21, 2012, 01:09 PM »

gasket remover, interesting, thanks

ive removed powder with nitromoors in the past, but under the plastic layer, it does seem to be like a glued on rubber substance, like a gasket

stidds · « **Reply #4 on:** November 21, 2012, 01:10 PM »

Not all gasket removers will work, I know Permatex will but you may have to experiment.

adenough · « **Reply #5 on:** November 21, 2012, 01:12 PM »

cheers

adenough · « **Reply #6 on:** November 21, 2012, 01:26 PM »

my local shop has in stock somethin called 'GET YOUR GASKET OFF' says its strong and in a spray, does anyone think its worth a go?

dordymush · « **Reply #7 on:** November 21, 2012, 04:50 PM »

i always use a heat gun and a sharp blade to get any real hard powder off.
takes ages but it comes off.

animal · « **Reply #8 on:** November 21, 2012, 08:33 PM »

I must be a loon then

I have used Oxy/actelene before

have also used a wire wheel on a drill or grinder . But make sure u use goggles cos the wire is foookin dangerous if it ends up in ur eyes

superbikedan · « **Reply #9 on:** November 21, 2012, 08:55 PM »

http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

stidds · « **Reply #10 on:** November 21, 2012, 09:58 PM »

Quote from: SuperBikeDan on November 21, 2012, 08:55 PM

http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough.

bobbbbsy · « **Reply #11 on:** November 21, 2012, 10:01 PM »

carb cleaner- halfrauds !

ED209 · « **Reply #12 on:** November 21, 2012, 10:07 PM »

Quote from: SuperBikeDan on November 21, 2012, 08:55 PM

http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

RADs Deja Vu question

Dan's right of course

superbikedan · « **Reply #13 on:** November 21, 2012, 10:08 PM »

Quote from: Stidds on November 21, 2012, 09:58 PM

Quote from: SuperBikeDan on November 21, 2012, 08:55 PM

http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough.

i honestly give up, i probs strip 2 to 300 frames a year but wtf do i know

Devilock · « **Reply #14 on:** November 21, 2012, 10:09 PM »

Quote from: Stidds on November 21, 2012, 09:58 PM

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough.

Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you!

ED209 · « **Reply #15 on:** November 21, 2012, 10:09 PM »

Quote from: SuperBikeDan on November 21, 2012, 10:08 PM

Quote from: Stidds on November 21, 2012, 09:58 PM
Quote from: SuperBikeDan on November 21, 2012, 08:55 PM

http://compare.ebay.co.uk/like/360509520579?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&adtype=pla&crdt=0

No fooker is listening Dan no matter how many times you put the information up.

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough.

i honestly give up, i probs strip 2 to 300 frames a year but wtf do i know

Q. What the hell will get powder off?
A. Dan

bobbbbsy · « **Reply #16 on:** November 21, 2012, 10:12 PM »

i thought you had to loose the chrome to pc .. can you just go over the top ?

stidds · « **Reply #17 on:** November 21, 2012, 10:21 PM »

Quote from: Devilock on November 21, 2012, 10:09 PM

Quote from: Stidds on November 21, 2012, 09:58 PM

Just how many threads do we still get regarding spoke lengths even though I did a walkthrough.

Those threads always make me laugh! You always post in the thread like you've stormed in the room, throw down the info then walk out slamming the door behind you!

I have stopped bothering these days Rich, makes me laugh though when somebody asks the spoke length question, gets rubbish advice from people and then 2 weeks later up pops a thread asking why the spokes they have bought are too long.