Author Topic: CHALLENGER HELP NEEDED. (Read 3547 times)

dordymush · « **on:** November 18, 2012, 09:10 PM »

right then the mad man from LLP our lenny gave me one of his ole frames last night to restore.
many thanks len.another one to the collection

now len loves his back wheel slammed so cut the end off the rear tube the loon

.
can anybody get me a measurement of the said tube and where about the hole was in the end as its been 10mm drilled for a boa brake.
i know there were a few on here.a measurment would be cool if anybody has 5 mins to check it for me

heres the bit missing modified by our lenny

Betty · « **Reply #1 on:** November 18, 2012, 10:58 PM »

Can't help with the measurement Dave, is it a 1" Challenger?

Is that challenger stem for sale?

dordymush · « **Reply #2 on:** November 18, 2012, 11:03 PM »

no mark its one of the first 1/18th ones i think.
think its a 95 ?.
need to check so i can order stickers ready for it.

i was gonna use the challenger stem on this build mark as every other bike i got has a redneck on it.
if i dont use it mucka i'll give ya a shout

Badbaldie · « **Reply #3 on:** November 18, 2012, 11:17 PM »

Dave whats that tiny bmx lurking in the back ground. post up a better pic mate lets see

dordymush · « **Reply #4 on:** November 19, 2012, 12:13 AM »

lol my old man bought it for me ages ago.
i can remember them being in bmx action bike bitd.
its pedals the wheel round . brakes work as well lol.look like oakley cobra grips on it lol.

bobbbbsy · « **Reply #5 on:** November 19, 2012, 12:15 AM »

you turned down my old marlboro for this type of thing ! tut tut

dordymush · « **Reply #6 on:** November 19, 2012, 12:18 AM »

lol i think this would last longer

SaMAlex · « **Reply #7 on:** November 19, 2012, 09:34 AM »

Mmmmmm. That is my fav rear end on any of the Challengers. The canti cable stop mounted on the wishbone

Here's one I got for a mate a few years ago. Im pretty sure he still has it.

dordymush · « **Reply #8 on:** November 19, 2012, 12:08 PM »

im gonna take it with me today to see steve animal to try and get it repaired.
no way you could get him to drop a tape on it for me is there alex

they must be the right stickers for it too.
i bet del dont have them fookers

.
i seen one on the museum with the yellow ones on it with like the tape measure sticker on the top tube. did they use them on these too as i think del has them.
not doing well with stickers for these bloody frames

SaMAlex · « **Reply #9 on:** November 19, 2012, 12:23 PM »

I dont see the dude very often but I can try for ya. Might take a while, he aint often in the UK $:-\$

I think Del has these stickers. He made the same ones for my 1997 24" challenger.
(Mine doesnt have the cable stop on the wishbone, its got an inner guide going round the seat clamp

)

dordymush · « **Reply #10 on:** November 19, 2012, 03:56 PM »

i'll try a few names that have posted pictures up of em as well to see if i can get a measurement.
bonus if dels got the proper sticker

i'll pm him now.
cheers alex.

kev-s · « **Reply #11 on:** November 19, 2012, 04:34 PM »

just measured my mk1 and from the seatube to the end of the brake mount tube is 5 and a half inches and the brake hole is 5mm from the end of the tube

dordymush · « **Reply #12 on:** November 19, 2012, 05:06 PM »

cheers kev

.
i'll get that written down and get steve on the job for me

kev-s · « **Reply #13 on:** November 19, 2012, 06:34 PM »

get a couple of other challenger owners to double check, as there maybe a difference in length on different/later versions

dordymush · « **Reply #14 on:** November 19, 2012, 07:24 PM »

will do.
just made a paper template to push in the hole and that size looks about right.

Dingobmxer · « **Reply #15 on:** November 19, 2012, 07:30 PM »

Got some black beringer bars here Dave £35 posted

Dingo

nosepickben · « **Reply #16 on:** November 19, 2012, 08:56 PM »

Beringers for sale eh..

Are they cut down? If so how wide are they?.

dordymush · « **Reply #17 on:** November 19, 2012, 09:17 PM »

get em bought ben.
im ok for bars

Dingobmxer · « **Reply #18 on:** November 19, 2012, 09:20 PM »

sorry for the hijack Dave

dont think they are cut down as they are about 27 & 1/2-28" wide

dingo

LENNY-LENTINI · « **Reply #19 on:** November 20, 2012, 11:17 AM »

Nice one Dords

Stripped down and ready for welding already.

I knew I'd sent it to right new owner

Good luck with the build Brother.

Keep the Hacksaw. L

dordymush · « **Reply #20 on:** November 20, 2012, 01:21 PM »

off to steves tomorrow our len for him to work his metal magic

.
thanks again man.
just trying to think what colour to paint it when it comes back.
dark blue maybe ?.

Dannywhac · « **Reply #21 on:** November 20, 2012, 01:33 PM »

Always been partial to a bit of earlier S&M colours - Forest Green or that Light Blue they did:

The blue:
http://bmxmuseum.com/bikes/sandm/11556#.UKuGTYb4Gf0

Forest green: