BITD Good And Bad Frames n' Parts You & Mates Demolished...

[adenough]

ME:
1, Gen 1 Haro Freestyler- bent forks,
2, Pk Ripper- Snapped off @ BB, rewelded & sold to my mate for probably a mars bar    
3, Burner cranks, bent completely,
4, Burner wheels, as above,
5, All 4 GT Performers were bullet proof for BITD standards, never knew of any that snapped!
6, Firebird Freestyler, my second fave to ride frameset, 80 plus front hops ,easy 
MATES:

1, PK RIPPER from above, snapped completely off at headtube,
2, DP Delta 2, went at seat & chain stays,
3, Robinson mini, snapped at head tube,
4, Above was replaced by bike shop in the states for an expert, then the forks cracked,
5, Skyways cracked,

Whats Your best & worst?? (just got back from New Cross eye Hospital(Wolvo) still cant see much )

[not johndub71]

1> Acorn magnums; snapped two rears even though front was bulletproof.
2> Suntour Coaster hub. Pedalled back and it fell apart on Kwik Save car park. RIP.
3> Kinda mine, but also Wayne Ryders, GT Pro performer forks snapped on welds at drop outs.
4> Marlboro pro race frame, pulled back brake bridge clean off with back hops.

[ThisBitterPill]

Quite a few stems and endless pedals until I bought SX's....

[Julian347]

Snapped a set of Laser-bars  
Hutch Pro Racer – cracked the downtube
Cracked a Suntour rear sprocket
Bent a couple of chain rings
Buckled a few rims.

[jT Racing]

I had a gt performer that was cracked under the downtube between the
bend and the headtube.

[In2 bmx]

I must have worn out ( rounded off ) 10 set's of Suntour VX  .

Mum got my some Redline flights after that .. 

[Jon The Bassist]

Despite my size I never broke a frame or forks BiTD
CW cruiser bars snapped whilst starting (replaced by Revcore bars )
Countless wheels, seatposts and bearings broken.
I moved on from SR type stems (to Pro Neck/Hutch etc) when I was about 12 but I saw many, many break so I think that was a lucky escape.
I shredded a couple of tyres.
Broken chains and freewheels (of many brands) ran into double figures easily.
I think I bent a few 1-piece cranks and bars but not snapped.

[BADDH]

I never broke a frame because I was only 8 stone when I was 12 bitd...

Regularly and flat spotted wheels over the jumps and once snapped a stem with my girlfriend on the back having a taxi home from school..she forgave me 

Rode the pedal bearings out and bent Sugino 1pc cranks a few times...

[baldbmxer]

Raleigh Burner - killed everything on it other than the f&f!

Hutch Pro Racer frame - cracked the head tube

Hutch Pro forks - cracked the dropouts

GT Pro Nora Cup - cracked behind the seat tube

Redline 401's = snapped pedal boss off coming out of the gate

Tuf Neck chain wheels - ripped the location bolt hole out

Seat posts - endless amounts of bent seat posts

GHP Star Bars - cracked

Renthal Bars - snapped

[rooski]

Think i ruined a few seats,and buckled a few wheels.

Never really managed to break anything on any bike ive ever had,most stuff just wears out on me

I am a lucky man

Broke a headset on me mtb,forgot about that

[Peter J]

Pro Class Rims - Flat spotted quite a few

Renthal Bars - One set bent another snapped

SR Cranks - Cracked

Renthal Lay Back - Bent

Ripper - Seat tube snapped and bent rear stays

MKS Graphs - Snapped

MX3's - Snapped loads after falling off

OPC's - Bent

Helmet - Cracked a few 

Skyway TA - Cracked fork dropout's

The only bike I had that I couldn’t break was my last racer Pro Class 

[OrgasmDonor]

GHP Frame DT snap
suntours stems x2 bent
robbo pro bars bent
endless 1pc sugino n takagi bent (altho takagi 180s remained my crank of choice  )
401s bent
i could also never get mx1000s to work as well as the earlier 1080s? 90s? cant remember which was the size but they worked much better than 1000s and the extra flex was quite nice  

on the flip side
GHP Forks, tufneck square corner stem, dc tech 3, elina LB, GT layback n suntour beartraps all saw me out, awesome products  
also gotta mention i had a 1.75 comp2 on the front n a 1.75 grippa on rear, those tyres lasted me about 2 years

[deeman]

Bent a Takagi OPC,that was about it!mostly did flatland as a kid!

[Spen69]

Utterly demolished a rear Tuff2 when imiss-judged the height of a set of steps I bunny-hopped up and snapped my chain and removed a lot of the chrome on my rear drop-outs at the same time.

Never damaged my Mongoose Cali frameset despite all the accidents I had...... But certainly sacrificed a lot of skin to the BMX gods and still do now!

[neil]

Only ever broke an acs stem it snapped clean in half!
Other than that nothing due to my smooth riding

[Bamb]

I chipped the black plastic chainring guard on my grifter !!!!
Still gutted now !!

[not johndub71]

Does snapping me nos ACS doubler count? Last week to blew..

[Gizmo]

Cracked one of the dropouts on my silver streak forks bitd
Got them welded at school , burnt the decal to fook 
He said there stronger & better than before , yer right   

[teamsano]

hutch stem-snapped the top off from the shaft
shimano dx pedals-snapped two pairs
aero zytecs-cracked to bits in about a month
prince albert cranks-broke in 2 weeks
skyway tuff wheels-snapped a rear spoke off
landing gear forks-broke dropout clean off
hutch pro racer-frame bent, brake bridge snapped off, forks bent
raleigh burner-snapped it when i was 10