Author Topic: 1995 Mongoose Villain (100% finished) (Read 29748 times)

stuntmaster · « **Reply #25 on:** November 13, 2012, 06:50 PM »

looks lovely so far my mate had one back in the day untill it got nicked . i got the big brother to yours ie the hooligan and mongoose did some nice stuff around 94 95

e5dcb · « **Reply #26 on:** November 16, 2012, 12:19 AM »

Cheers fella. Yeah mongooses were very popular around here late 80s to late 90s.

stuntmaster · « **Reply #27 on:** November 16, 2012, 02:06 PM »

here mine http://img.photobucket.com/albums/v260/hutch1970/100_0203rs.jpg

Discostu · « **Reply #28 on:** November 16, 2012, 06:02 PM »

Great restoration. Looking good.

e5dcb · « **Reply #29 on:** December 02, 2012, 11:47 PM »

Small update on the wheels , thanks to the sticky on here from stidds
It sort of got me on track to respoking the 48s.
Before.

Rusty spokes and some missing. Strip down and clean up.

Awhile later.

Still need a longer front axle so that's my next job.

GavinDavis · « **Reply #30 on:** December 02, 2012, 11:49 PM »

Good job there bud

....I find it really a real therapy building wheels

e5dcb · « **Reply #31 on:** December 02, 2012, 11:55 PM »

It's the first pair I've done so did take abit of time. Didn't quite work out like the walk through on here for some reason not sure it there is a different way for 48s. But it's done and another job off the list. Will just get them tweaked by the local shop as I don't have a jig.

s1mes · « **Reply #32 on:** December 10, 2012, 01:00 PM »

really enjoyable that!

e5dcb · « **Reply #33 on:** December 10, 2012, 08:47 PM »

A bit pissed off at the min $:-\$
Sent the wheels round to a local shop and asked for them to be tweaked up. Said any problems give me a shout etc. anyway 2 days have passed and no phone call. ( he said it will be done same day as I dropped them down). Anyway ring up ask how it's going only to be told he's completely stripped them down ? I said I only wanted a tweak up and to call if any problems. ( I won't be doing 30 foot jumps on the bike ffs.) he's now rebuilding them saying "oh it's abit tricky trying to finish a job someone else has done. So a £5 job of tweaking is now gonna cost a lot more but he never rang to say.

bobbbbsy · « **Reply #34 on:** December 10, 2012, 08:52 PM »

Quote from: e5dcb on December 10, 2012, 08:47 PM

A bit wee weeed off at the min $:-\$
Sent the wheels round to a local shop and asked for them to be tweaked up. Said any problems give me a shout etc. anyway 2 days have passed and no phone call. ( he said it will be done same day as I dropped them down). Anyway ring up ask how it's going only to be told he's completely stripped them down ? I said I only wanted a tweak up and to call if any problems. ( I won't be doing 30 foot jumps on the bike ffs.) he's now rebuilding them saying "oh it's abit tricky trying to finish a job someone else has done. So a £5 job of tweaking is now gonna cost a lot more but he never rang to say.

take the bits back , rebuild yourself and take them to another bike shop and berate the said bike shop to anyone that will listen !

e5dcb · « **Reply #35 on:** December 10, 2012, 09:23 PM »

Well when he rang he was in the middle of rebuilding them. That was Saturday I've heard nothing since.

Betty · « **Reply #36 on:** December 10, 2012, 09:51 PM »

Good job so far

Nice to see someone replicating their old ride

If i did my last one from bitd it'd be a right bag o sh1te

bobbbbsy · « **Reply #37 on:** December 10, 2012, 09:53 PM »

Quote from: e5dcb on December 10, 2012, 09:23 PM

Well when he rang he was in the middle of rebuilding them. That was Saturday I've heard nothing since.

i hate shitty bike shops that feel you owe them something !

Dark Diggler · « **Reply #38 on:** December 10, 2012, 10:09 PM »

The guy in the shop should have noticed they were built slightly wrong straight away and explained that when you gave them to him. From what I can see, they would tweek fine, its just the valve hole that's in the wrong place, making pumping up ya tyre a bitch.
Demand it for free and twat him

e5dcb · « **Reply #39 on:** December 10, 2012, 10:21 PM »

He was concerned about thread length on some of the spokes. That's all I could get out of him but a simple call to explain wouldn't of gone a miss.

e5dcb · « **Reply #40 on:** December 11, 2012, 06:44 PM »

The chain was shot very loose and was due a change. They still sell the kmc chains lucky.

e5dcb · « **Reply #41 on:** December 13, 2012, 02:06 PM »

Very near finishing now. Finally got round to building it up, rear brake set up all done and just waiting for a plate for the front U brake.

e5dcb · « **Reply #42 on:** December 23, 2012, 09:14 PM »

Same workshop as above but in 1996

All built up , a few odds and ends still to find like the xposure gyro cover impossible to find anywhere. Have emailed a few users on here who I've seen have one fitted to their bikes in a bid they may sell.

The front axle in 175mm is impossible to find so I cant fit the pegs. May have to get an engineering place to knock one up. Bitd was easy to pick one up. All I can find is standard size but need the extra bit for fitting the pegs.
Pegs on the back need some paint stripper as the chrome is mint underneath and someone's just rattle canned them black.
Nice rider though , pleased with how the frame came out but surprised how some mid school bits are hard to find. Also beware using the acid with decals still on I've noticed some have cracked and I can't put it down to anything else other than the acid bath.

T WILD · « **Reply #43 on:** December 28, 2012, 11:05 PM »

Bike looks mint mate I would love to build one of my old ones but which bike from what time would be difficult

. I used to use mountain bike spindles on the front can you not get one of those and a deep socket. I know it sounds a bit bodge but hey thats what we all did back then.

e5dcb · « **Reply #44 on:** December 29, 2012, 03:04 PM »

Cheers for the comment fella. I did get a longer spindle from a bike shop recently but he gave me the wrong size and doesn't have any in the right size. So might get one made up soon.

e5dcb · « **Reply #45 on:** March 30, 2013, 09:36 PM »

Small update - No luck buying a longer front spindle so I could fit the pegs so I called on my engineer uncle.
He made one from scratch at 175mm long that's done the job.

pkripster · « **Reply #46 on:** March 30, 2013, 09:45 PM »

Hi did u get those bars of old school flava the chromes bit flat on em

e5dcb · « **Reply #47 on:** March 30, 2013, 09:49 PM »

Did mate yes a long time ago now. Chromes good just needed some peak polish.

midschooljon · « **Reply #48 on:** March 30, 2013, 09:52 PM »

Was this on Ebay recently? Saw one just like it going a week or so back.

e5dcb · « **Reply #49 on:** March 30, 2013, 09:55 PM »

Nope not mine unless someone nicked the pics. ?
I've been building and sourcing parts for along time for this one to build it to my spec from 97.

I've had a quick look on eBay and yeah a sort of standard one sold awhile back.
For £50 odd.

Author Topic: 1995 Mongoose Villain (100% finished) (Read 29748 times)

e5dcb

e5dcb

e5dcb

s1mes

e5dcb

e5dcb

e5dcb

e5dcb

e5dcb

e5dcb

T WILD

e5dcb

e5dcb

pkripster

e5dcb

e5dcb