Author Topic: just need wheels for my 24" TA.... (Read 2319 times)

meticulous · « **on:** October 05, 2012, 07:00 PM »

skyway graffites now ordered.....

and why isnt the rear brake bridge drilled for some proper brakes? $:-\$

would it be sacrilidge to drill it open my self?

jimwise68 · « **Reply #1 on:** October 05, 2012, 07:07 PM »

Nice. what headset is that?

What wheels you going for?

I'm heading to RADBMXSHOP tomorrow to order all my bits

meticulous · « **Reply #2 on:** October 05, 2012, 07:12 PM »

chris king...

i want graffites really.... $:-\$

meticulous · « **Reply #3 on:** October 05, 2012, 07:45 PM »

got some graffites

mattuknc · « **Reply #4 on:** October 05, 2012, 08:02 PM »

Did you drill the forks?! $:-\$
Nice move on the graffites.

brummie · « **Reply #5 on:** October 05, 2012, 08:05 PM »

c ouldnt you order it without those canti mounts?
the bridge would then be drilled for a caliper brake???

meticulous · « **Reply #6 on:** October 05, 2012, 08:12 PM »

Quote from: mattuknc on October 05, 2012, 08:02 PM

Did you drill the forks?! $:-\$
Nice move on the graffites.

no forks already drilled...

arent yours?

Quote from: brummie on October 05, 2012, 08:05 PM

c ouldnt you order it without those canti mounts?
the bridge would then be drilled for a caliper brake???

no, they were standard with no option, but no hole in the rear bridge.... $:-\$

brummie · « **Reply #7 on:** October 05, 2012, 08:14 PM »

when you gonna spray it sam lol

Devilock · « **Reply #8 on:** October 05, 2012, 08:31 PM »

That'll look rather nice Sameister...

Whats the weight of the F+F?

mattuknc · « **Reply #9 on:** October 05, 2012, 08:57 PM »

Quote from: meticulous on October 05, 2012, 08:12 PM

Quote from: mattuknc on October 05, 2012, 08:02 PM
Did you drill the forks?! $:-\$
Nice move on the graffites.

no forks already drilled...

arent yours?

Quote from: brummie on October 05, 2012, 08:05 PM
c ouldnt you order it without those canti mounts?
the bridge would then be drilled for a caliper brake???

no, they were standard with no option, but no hole in the rear bridge.... $:-\$

Oops, so they are!

meticulous · « **Reply #10 on:** October 05, 2012, 09:21 PM »

Quote from: Devilock on October 05, 2012, 08:31 PM

That'll look rather nice Sameister...

Whats the weight of the F+F?

not a clue tbh, i really is for just rolling around on with my boy....

martin46 · « **Reply #11 on:** October 05, 2012, 09:22 PM »

Looks great already, liking the anno red

Going to look even better on Graph's

martin46 · « **Reply #12 on:** October 05, 2012, 09:24 PM »

Some quality parts on that! What is the BB?

Devilock · « **Reply #13 on:** October 05, 2012, 09:27 PM »

You'll probably sell it within a week of it being built!

meticulous · « **Reply #14 on:** October 05, 2012, 09:28 PM »

Quote from: martin46 on October 05, 2012, 09:24 PM

Some quality parts on that! What is the BB?

diety.

HEYWOOD BMX · « **Reply #15 on:** October 05, 2012, 10:59 PM »

Watch that chainline with the external BB

If you space the freewheeel you might run into problems with the chain grinding the seatstay...

Bigfrawg · « **Reply #16 on:** October 05, 2012, 11:48 PM »

Now , I haven't really followed this whole 24" skyway thread so is it just me who thought they were going to come as 1" frames with caliper brakes ?
Maybe I'm just a bit of a spazzer but isn't that what everyone would have prefered ?

meticulous · « **Reply #17 on:** October 06, 2012, 06:58 AM »

Quote from: VOIVOD on October 05, 2012, 10:59 PM

Watch that chainline with the external BB If you space the freewheeel you might run into problems with the chain grinding the seatstay...

Will do James, might have to put the chain wheel on the wrong side...

Glynnyboy · « **Reply #18 on:** October 06, 2012, 07:29 AM »

Quote from: bigfrawg on October 05, 2012, 11:48 PM

Now , I haven't really followed this whole 24" skyway thread so is it just me who thought they were going to come as 1" frames with caliper brakes ?
Maybe I'm just a bit of a spazzer but isn't that what everyone would have prefered ?

I thinks that's probably the UK consensus but a lot of Yanks still race, even if not highly competativley. So market research indicated a new school feel was more important than a retro one.
I like these but what a buzz riding round a a re issue of the orginal TA cruiser would have been eh?

Loving it so far Sam

Dark Diggler · « **Reply #19 on:** October 06, 2012, 07:42 AM »

shame you are going to fook it up with skyways

you should get some hubs to match your headset and let me build you some proper wheels

meticulous · « **Reply #20 on:** October 06, 2012, 07:52 AM »

Quote from: Dark Diggler on October 06, 2012, 07:42 AM

shame you are going to fook it up with skyways you should get some hubs to match your headset and let me build you some proper wheels

you mean them old fashioned spokey things that cars stop using in the 1920's?

Dark Diggler · « **Reply #21 on:** October 06, 2012, 11:59 PM »

1920's is modern compared to 1730

Glynnyboy · « **Reply #22 on:** October 07, 2012, 12:55 AM »

Quote from: meticulous

It really is for just rolling around on with my boy....

Tuffs roll great on these ride outs we all go on, they have delivered me safely from pub to pub on the last two radchester rides so if rolling around is all your doing they are great.

So what are you doing with the brakes then Sam?
The annode dc mx2 v brakes look nice for just rolling round and would suit the bike.( haven't bothered reading any reveiws but as all i would be doing is rolling i don't need to)
I notice that porkies only sell right hand levers so if your wanting to be road legal and use a front too it leaves you in a bit of a dilemma for getting a left side anodised lever.
I haven't decided anything on what to do with mine yet but have been looking around at bits.
If you want those levers and can get hold of a left would you be able to buy a spare right from porkies and remove the lever bit from the body so you would have an anodised left and right of your colour choice?
It looks as though they are only connected to the housing by an allen bolt instead of a rivet so could be do-able.

meticulous · « **Reply #23 on:** October 07, 2012, 08:03 AM »

Quote from: glynnyboy on October 07, 2012, 12:55 AM

Quote from: meticulous
It really is for just rolling around on with my boy....

Tuffs roll great on these ride outs we all go on, they have delivered me safely from pub to pub on the last two radchester rides so if rolling around is all your doing they are great.

So what are you doing with the brakes then Sam?
The annode dc mx2 v brakes look nice for just rolling round and would suit the bike.( haven't bothered reading any reveiws but as all i would be doing is rolling i don't need to)
I notice that porkies only sell right hand levers so if your wanting to be road legal and use a front too it leaves you in a bit of a dilemma for getting a left side anodised lever.
I haven't decided anything on what to do with mine yet but have been looking around at bits.
If you want those levers and can get hold of a left would you be able to buy a spare right from porkies and remove the lever bit from the body so you would have an anodised left and right of your colour choice?
It looks as though they are only connected to the housing by an allen bolt instead of a rivet so could be do-able.

i'm gona put red tech 4's on with red 1020 calipers once i've drilled the rear brake bridge, keeping looking O/S...

Glynnyboy · « **Reply #24 on:** October 07, 2012, 12:03 PM »

I was just wondering when looking at my frame last night if that would work. I know with it been round there's only one place to put the hole, unlike some of the os brake bridges where it's more like a slot.
Have you had a little mock up, won't it look odd with the v mounts?

Author Topic: just need wheels for my 24" TA.... (Read 2319 times)

mattuknc

mattuknc

HEYWOOD BMX