Author Topic: Hutch frame n forks (Read 3797 times)

poolysheriff · « **on:** October 05, 2012, 05:35 PM »

Right
what have i got

Its got a TT of 19 1/2"
Serial number is on the BB and its TT2141
Been used by me very little
Cant sell it if i dont know what it is $:-\$

AKGOFF · « **Reply #1 on:** October 05, 2012, 05:42 PM »

Pro Racer I believe.

poolysheriff · « **Reply #2 on:** October 05, 2012, 05:50 PM »

It came with those white decals on
But i might have renewed a few of them that were marked
Think the main frame one is still original

dont want to sell it as one thing if its another

Dont want to rob anyone

HUTCHMAN · « **Reply #3 on:** October 05, 2012, 07:24 PM »

are the weep holes in the rear triangle drilled or punched, and how many are there Gaz?

poolysheriff · « **Reply #4 on:** October 05, 2012, 07:33 PM »

Quote from: HUTCHMAN on October 05, 2012, 07:24 PM

are the weep holes in the rear triangle drilled or punched, and how many are there Gaz?

1 in each side
hard to tell if they are drilled or punched $:-\$
possibly punched

HUTCHMAN · « **Reply #5 on:** October 05, 2012, 07:41 PM »

can you do us a pic of the brake bridge?

glenboy · « **Reply #6 on:** October 05, 2012, 07:43 PM »

could it be a pro raider maybe

poolysheriff · « **Reply #7 on:** October 05, 2012, 07:45 PM »

I,ve got a pro raider as well and the serial number is M4-G0104 on that $:-\$

brummie · « **Reply #8 on:** October 05, 2012, 07:49 PM »

overseas pro racer $:-\$

HUTCHMAN · « **Reply #9 on:** October 05, 2012, 07:50 PM »

the pro raider make total sense...has this other one got any other serial numbers on the inside of the LH drop out?

poolysheriff · « **Reply #10 on:** October 05, 2012, 07:53 PM »

Think i,ll just sell it as a burner

I,ll go and have another look Dave

Whats the cheapest Hutch it could be ,and i,ll list it as that

glenboy · « **Reply #11 on:** October 05, 2012, 07:59 PM »

are they stamped on the bb if its taiwan made and on the dropout if usa made

HUTCHMAN · « **Reply #12 on:** October 05, 2012, 08:29 PM »

Quote from: poolysheriff on October 05, 2012, 07:53 PM

Think i,ll just sell it as a burner

I,ll go and have another look Dave

Whats the cheapest Hutch it could be ,and i,ll list it as that

ok...£20 then?

poolysheriff · « **Reply #13 on:** October 05, 2012, 08:49 PM »

My pro raider has more weep holes in the rear chain stays than this one

poolysheriff · « **Reply #14 on:** October 05, 2012, 08:59 PM »

Says on the Hutch website that the pro raider has a toptube of 18 1/4"

Is this right $:-\$

And it says the pro racer is 19 1/2"

CAnt find any serial number info though

HUTCHMAN · « **Reply #15 on:** October 05, 2012, 08:59 PM »

that looks U.S !!

poolysheriff · « **Reply #16 on:** October 05, 2012, 09:03 PM »

I was just going to say is it Taiwan pro racer

glenboy · « **Reply #17 on:** October 05, 2012, 09:06 PM »

the plot thickens

poolysheriff · « **Reply #18 on:** October 05, 2012, 09:11 PM »

Taiwan pro raider

But its 19 1/2" TT

Just had another look and it could be owt

Money is on Taiwan Pro Racer

glenboy · « **Reply #19 on:** October 05, 2012, 09:24 PM »

i'm thinking tai hutch pro racer , the tubing on the racer is slightly narrower on the racer 1 inch versus 1 and 1/8th inch for the raiders top tube, give it a measure gaz but tai pro racer for my money

tai hutch pro racer

Serial number on the BB, , 19 1/2" TT length, 1" TT O.D., 1 3/8" DT O.D.,

pro raider


Serial number on the BB (as for I know starting with M4-…), , 18 1/2" TT length, 1 1/8" TT O.D., 1 1/4 DT O.D. Made in Taiwan.

glenboy · « **Reply #20 on:** October 05, 2012, 09:31 PM »

ah right got it now looking at the info above the pro racer has a noticably bigger downtube than its top tube whereas the raider the downtube is virtually the same size as the top tube , accordingly most pro raiders are in the 19 inch top tube size even though the spec is 18.5 so measuring the top tube and down tube ids the definitive answer

, i've learnt something new today

Darren KAP · « **Reply #21 on:** October 05, 2012, 09:38 PM »

Sell it to me Gaz and i'll spray it Day-glow orange and fit discs

HUTCHMAN · « **Reply #22 on:** October 05, 2012, 10:08 PM »

what is the down tube dia?

Twesnik · « **Reply #23 on:** October 06, 2012, 12:59 AM »

Hmmmm......
Another Disc Hutch?
One = more then enough!

poolysheriff · « **Reply #24 on:** October 06, 2012, 12:15 PM »

I,ve checked and my pro raider has a TT of 18 1/2"
And the holes are punched on that ,
And drilled on the other one , pro racer

So anyone know who much is a decent price lmk