Author Topic: Cables and rotors help (Read 643 times)

Sheriff69 · « **on:** September 04, 2012, 09:20 PM »

I have read quite a few threads regarding lubeing cables when using a rotor, can someone recommend some lube to use (waits for someone to type slide & glide

)

Cheers

Discostu · « **Reply #1 on:** September 04, 2012, 09:33 PM »

Remove the inner cables if possible. On non gyro units. And spray wd40 down the centre of the outer cable using the straw.
On gyro cables spray as much down each inner as you can get. Also spay all the joints.

Sheriff69 · « **Reply #2 on:** September 04, 2012, 09:39 PM »

Quote from: discostu on September 04, 2012, 09:33 PM

Remove the inner cables if possible. On non gyro units. And spray wd40 down the centre of the outer cable using the straw.
On gyro cables spray as much down each inner as you can get. Also spay all the joints.

Thanks Stu

not johndub71 · « **Reply #3 on:** September 05, 2012, 10:03 PM »

I pop some grease in the part of the cable where the two join to one too.

midschooljon · « **Reply #4 on:** September 05, 2012, 10:18 PM »

I use white lightening chain lube on gyro cables. It is a little more sticky then WD40 so coats them better and keeps them working smooth for longer. Spray lubes work well for a day or 2 but tend to not last nearly as long. Some grease in the join "capsules" is also a good idea.