Something I'm dlcking with :: Kinda BMX!!

[Jaymz]

Drift Trike

[BENDYCAT ELEVENTEEN]

it's gonna snap and take yer sack off 

why has it a brake lever but no caliper ?

[Jaymz]

it's gonna snap and take yer sack off 

why has it a brake lever but no caliper ?

Its nowhere near finished yet. it will have a front disc brake once Ive found a POS 20" mtb wheel. The hardest part is i want to bang a crank through the front wheel so the kids can pedal it as well

[dan-dare]

 

[Jaymz]

 

Too right, had one as a kid and loved it, this one is grown up size!!!!

[midschooljon]

A friend of a friend of a friend (if you get my drift) makes these and sells them.

[Jaymz]

Awesome John! Im after those sleeves for the rear wheels so i can get some arse out action!!!!!!

[BENDYCAT ELEVENTEEN]

[Gnarlyscoots]

Jaymz, let the rear tyres down a bit, measure the radius and get some large plastic waste pipe. Cut to size, place over the tyres and pump them up again  

[Darren KAP]

 

   Jaymz when did you pose for the pic 

[Badbaldie]

 

   Jaymz when did you pose for the pic 

hope your not thinking of sitting on this Kappy after that plate of chips 

[Jaymz]

 

   Jaymz when did you pose for the pic 

Its a fresh one in my portfolio fella, had it done last week

Jaymz, let the rear tyres down a bit, measure the radius and get some large plastic waste pipe. Cut to size, place over the tyres and pump them up again 

Dude you are a legend 

[GaryN]

Jaymz, a thought for the front wheel/cranks -

How about seeing if you can lay your hands on a Tuff wheel and a single piece BMX crank and see if the pair might somehow go together although the fork dropouts will also need modifying as well.

Just a thought and without actually having the parts to look at it might be a rubbish idea  

[Jaymz]

Jaymz, a thought for the front wheel/cranks -

How about seeing if you can lay your hands on a Tuff wheel and a single piece BMX crank and see if the pair might somehow go together although the fork dropouts will also need modifying as well.

Just a thought and without actually having the parts to look at it might be a rubbish idea  

that had come to mind.
My idea at the moment is to use a cheap 3piece kiddy crank machined so its all one diameter. Then sleeve it.
The fork dropouts will be modded to look like the top of a primo rod seat post

It's hard to explain. But in my head its sorted. You'll have to wait for pics

[GaryN]

I get where you're coming from.

[Hootski70]

Why not buy an old 20'' uni cycle and use it as the forks . Sure the cheap ones are 1''1/8 .

[Jaymz]

Why not buy an old 20'' uni cycle and use it as the forks . Sure the cheap ones are 1''1/8 .

hi Simon. The thought had crossed my mind. But that would be the easy option

Spent most of today trying different things out and think Im nearly there now.

[jT Racing]

You could adapt a14mn axle to take an Ali three piece.

[Jaymz]

Pedal power!!!!

[dan-dare]

Farts will sound good off that 'seat'..... 

[Retrodan72]

I can't wait to see you bombing around the lake @ MK next year on this J.

[Munnyella]

I look at that and just see a whole world of pain and hurt.

Looks cool though, I want/don't want a go!!

MM

[Jaymz]

I look at that and just see a whole world of pain and hurt.

Looks cool though, I want/don't want a go!!

MM

yeah its going to hurt if it all goes wrong, need to put some foot stands on the fork shoulders as the crank is fixed with no freewheel, as Im still working out how to do that!!!

[mattuknc]

http://www.youtube.com/embed/9p_tgNzRoi4

[Retrodan72]

http://www.youtube.com/embed/9p_tgNzRoi4

Fookin awesome lunacy.