Author Topic: Re-threading Forks (Read 889 times)

750Rush · « **on:** October 03, 2012, 07:34 PM »

Hello,

Does anyone know a machine shop in or near London that can re-thread 1" forks?

I have two pairs that need attention.

This is the last set I bought:

meticulous · « **Reply #1 on:** October 03, 2012, 07:42 PM »

if they are valuable forks then cut off all the thread and then weld on new thread from some other cheap forks, thats what i did with good success...

GT Jon · « **Reply #2 on:** October 03, 2012, 08:14 PM »

You can buy a die nut and clean the threads up yourself.
http://www.billys.co.uk/english/group.php?prod=2CY-fk-thread-die.

It all depends where the damage is in relation to the headset/locknut as to if you can get away with it.
I have assembled frame,forks and headset and worked out if the damaged area of threads sits in the same area as where the headset top cap and locknut locates

Hope this helps

dan-dare · « **Reply #3 on:** October 03, 2012, 08:27 PM »

It doesn't look like there is sufficient metal left there to cut thread....

Maybe fill the gap with weld, and then have a go with the die in the link above.

750Rush · « **Reply #4 on:** October 03, 2012, 09:29 PM »

Thanks for the link, but man are they expensive

If only I could find a local bike shop or machine shop. I think they will need building up with steel epoxy or a dab of weld first. These are just 16" Peugeot forks, but the other set I have are Tange ARX, so I'd like a fix for both really.

Gnarlyscoots · « **Reply #5 on:** October 03, 2012, 11:03 PM »

For such a tall guy Rushey, you sure do like your mini's

750Rush · « **Reply #6 on:** October 04, 2012, 08:33 AM »

LOL Terry

The minis are all for my lad who recently turned 4. He went to a couple of skateparks last weekend for the first time ever and we struggled to get him to come home with us