Author Topic: Freewheel remover (Read 662 times)

CustardLips · « **on:** August 27, 2012, 11:39 PM »

Are they a standard one size fits all or are there differences ?

jT Racing · « **Reply #1 on:** August 28, 2012, 12:13 AM »

2 prong and 4.
Most are 4
Need one myself for one hub.

CustardLips · « **Reply #2 on:** August 28, 2012, 12:29 AM »

Nice one pal.

BENDYCAT ELEVENTEEN · « **Reply #3 on:** August 28, 2012, 02:25 AM »

also depends on the freewheel - as some are shite in the way the tool takes them off + add 30 years of tightening = HELL

cut it off if you have gone down every route possible

ED209 · « **Reply #4 on:** August 28, 2012, 07:18 AM »

got a 4 prong one I can post out on a lender

best way is to clamp the freewheel tool in a vice then slot the freewheel in and use the wheel as leverage to turn.... just turn the right way

CustardLips · « **Reply #5 on:** August 28, 2012, 07:35 AM »

Thanks for the offer Ed. I''ll purchase one, I'm sure I'll get my use out of it !

not johndub71 · « **Reply #6 on:** August 28, 2012, 10:53 AM »

Seperate the freewheel. Theres usually some dimples so smack those loose with a punch and hammer, take the cog off and vice the body and screw off in worse case scenario.