Author Topic: Skyway Tuff 2 (Read 844 times)

bbmac · « **on:** July 03, 2006, 06:35 PM »

How do you remove the rivets on Tuff 2 and what do you use to refit hubs

BrianP · « **Reply #1 on:** July 03, 2006, 06:40 PM »

drill out the unrivetted end of the rivet (there are definitely posts on here explaining this in detail - came up a month or two ago)
I use M4 threaded stainless steel studding and M4 stainless steel nylock nuts on my rebuilds.

Bp.

bbmac · « **Reply #2 on:** July 03, 2006, 06:48 PM »

Thanks now i can make a start on bleaching and dying tuffs from a very pale yellow / white back to yellow

selfpreservation · « **Reply #3 on:** July 03, 2006, 07:06 PM »

cant you yus leave th alloy hubs in and grease them for protection see the how to section

Nosnod · « **Reply #4 on:** July 03, 2006, 08:30 PM »

Don't remove the rivets if you don't have to!
I had a pair of yellows in neat bleach for about 6 days. Just plaster the metal bits in grease and they will be fine. If they go a bit blackish don't worry as it polishes out.