Profile mini shims

[Mdbh]

Any body put the shims in the rear wheel to stop the wobble? I got some, do they go behind the driver?

[HEYWOOD BMX]

  Explain further please.

[Mdbh]

Profile mini cassette hubs can sometimes develop a slight wobble or play so they supply a very thin shim to stop this, I'm just wondering if the shim go's behind the driver because there is already one there so sounds like its to beef that 1 up a little bit...?

[kuwahero]

is the shim thinner or thicker than the one already there?

they also do wafer thin ones which go behind the axle bearings

as above more info/pics required

 

[Mdbh]

is the shim thinner or thicker than the one already there?

they also do wafer thin ones which go behind the axle bearings

as above more info/pics required

 

it is wafer thin fella? But I'd of thought just putting up with the og should get rid of slack or should go behind the bearings?

[HEYWOOD BMX]

  I`m using a 1mm shim behind the cog on my mini race cog to correct the chainline,hub is 18 months old & no probs so far.

[Mdbh]

I`m using a 1mm shim behind the cog on my mini race cog to correct the chainline,hub is 18 months old & no probs so far.

Mines only a very slight wobble it feels like loose cones but there not loose!?

[Betty]

I`m using a 1mm shim behind the cog on my mini race cog to correct the chainline,hub is 18 months old & no probs so far.

Mines only a very slight wobble it feels like loose cones but there not loose!?

I have the same issue with mine

Put it down to grind damage to the hub shell 

[kev-s]

dont get this prob with proper hubs

[kev-s]

this any help

http://profileeurope.co.uk/wp/?page_id=21

says here they go behind the bearing

http://profileracing.com/estore/product.php?productId=351&categoryId=19

[Mdbh]

dont get this prob with proper hubs

No they just snap! Had em last about 6 months! Lol
Oh and thanks for the link Kev!:)

[kev-s]

a simple google search was all you needed to do

what the fook were u doing to them!!

mine are nearly 4 years old and still fine and im no lightweight on my pegs

[Mdbh]

a simple google search was all you needed to do

what the fook were u doing to them!!

mine are nearly 4 years old and still fine and im no lightweight on my pegs

What can I say Kev, I'm hard core! When are we going up waitrose?

[kev-s]

if its wet on weds we can go then instead of the park, hopefully shane, paul, mart and drainer can come along too

[elevensies]

If you have a wobble, you have broken a bearing, take them out and check around the outside, I fookin hate profile for this, I must go through one bearing a month on a ss 10mm rear,
I have other issues with other profile hubs I have, I honestly don't know why...

But anyway, that shim, it goes behind the driver, keeps the driver from rubbing on the inner shell.
The other thing is, are you running female axle or male, and if it's female is it the steel or alloy version, as the axle stubs have different threads.

[revcore]

I had the same wobble in my Profile Mini hubs too. I put new bearings in the hub shell and the driver along with new shims but still the wobble remained....Couldn't be bothered with it anymore so I sold the hubs dirt cheap just to get rid of them.