Author Topic: Slight movement after replacing a stem(s) (Read 808 times)

Jaan · « **on:** August 20, 2012, 06:57 PM »

Elp, i've just recently replaced 2 stems, a black for a blue Suntour Power Stem on a KZ1 and chrome for a red Group 1 on a FST. Now when I pull the front brake there is a slight bit of give and a knock noise - what have I done wrong as i've expertly replicated the problem on both bikes...

Consistently not quite getting things right,
Chris

animal · « **Reply #1 on:** August 20, 2012, 08:52 PM »

Have u got them both slammed down on the lock nuts ? If there is a gap they will move a little

there r raviations on quill diameters aswell which can be remedied by wrapping cut up beer can around the quill. But b very carefull cos when its cut its like a razor

Discostu · « **Reply #2 on:** August 20, 2012, 09:08 PM »

Good advise there Steve. I would also check the headset hasn't come loose as the bearings settle into the cups after a bit of riding. Remember to take the top nut and toothed washer off to tighten up the top cone on a beartrap type headset. So you don't fook the threads on the forks.