Author Topic: fancy some new 175mm profiles or a set of ss profiles? (Read 7349 times)

kev-s · « **on:** July 01, 2012, 11:18 AM »

now is the time to buy

£80 inc bb

http://www.winstanleysbmx.com/product/8707/Profile_RaceFreestyle_RHD_Cranks_wCromo_Axle

also profile ss cranks available

http://www.winstanleysbmx.com/product/8713/Profile_SS_Cranks_wCromo_Axle

phatjimmy · « **Reply #1 on:** July 01, 2012, 12:22 PM »

JESUS WEPT

bobbbbsy · « **Reply #2 on:** July 01, 2012, 12:27 PM »

you been hacking winstanleys kev ?

gary67 · « **Reply #3 on:** July 01, 2012, 12:32 PM »

All gone now

kev-s · « **Reply #4 on:** July 01, 2012, 01:12 PM »

ss and chrome 175's now gone

black 170 and white 175's left

Rob1 · « **Reply #5 on:** July 04, 2012, 08:49 AM »

:rant:Everyone was right about Winstanleys ! My Profile SS 175s with Mid bb arrived this morning....I open the box and the arms are 170mm , the bb is euro and there`s no axle . Bargain !

gary67 · « **Reply #6 on:** July 04, 2012, 10:01 AM »

:knuppel2:Got mine today aswell,1 arm 175mm and the other 170mm an an axle bolt missing :2gunsfiring_v1:But the other pair were fine

thecaptain · « **Reply #7 on:** July 04, 2012, 11:57 AM »

i'd never trust wankstanleys, no matter how much of a deal they put on...

gary67 · « **Reply #8 on:** July 04, 2012, 01:11 PM »

Sent back already,was gonna have a refund but thought i might need em for another build ::)Other pair will probably go on the Shaman :daumenhoch:Had loads of stuff from there its the first order that was wrong.I guess i've been lucky!!

kev-s · « **Reply #9 on:** July 04, 2012, 02:34 PM »

sorry guys, hopefully they will sort it out quick for you, sounds like someone who has worked there in the past may have swiped the axle!

gary67 · « **Reply #10 on:** July 04, 2012, 06:01 PM »

Quote from: Glen on July 04, 2012, 02:35 PM

What did they say about this mess?

They said sorry and asked whos name was on the invoice,and offered refund or replacement.

HEYWOOD BMX · « **Reply #11 on:** July 04, 2012, 06:22 PM »

These idiots never change.They now have a Facebook page & offer lots of excuses & delete any questions as to why they fook up so many orders

Betty · « **Reply #12 on:** July 04, 2012, 07:17 PM »

Fcuk w@nkstanleys

Mdbh · « **Reply #13 on:** July 04, 2012, 07:43 PM »

Quote from: Glen on July 04, 2012, 06:26 PM

Ive yet to have to return an order from them. I did once order a frame they were showing as in stock to be emailed and refunded later telling me it was not in stock. Everything else has been perfect

Same here they've always got my stuff spot on

Dark Diggler · « **Reply #14 on:** July 04, 2012, 07:50 PM »

Gary Glitter says he will never , ever......ever, touch a minor again.

That's ok then

Rob1 · « **Reply #15 on:** July 05, 2012, 06:34 PM »

Well , ParcelForce collected the crankset today . Winstanleys say they will refund me when they get them back . We will see .

rooski · « **Reply #16 on:** July 06, 2012, 08:48 PM »

Got mine today,all good

gary67 · « **Reply #17 on:** July 07, 2012, 12:31 AM »

Quote from: rooski on July 06, 2012, 08:48 PM

Got mine today,all good

Probably combined the parts of everyone elses

rooski · « **Reply #18 on:** July 07, 2012, 09:22 AM »

Quote from: Gary67 on July 07, 2012, 12:31 AM

Quote from: rooski on July 06, 2012, 08:48 PM
Got mine today,all good

Probably combined the parts of everyone elses

Got plenty sprocket bolts and crank bolts if anyone needs any

Rodgy1970 · « **Reply #19 on:** July 07, 2012, 11:38 AM »

Mine arrived yesterday as well all good I got a chrome set well nearly.

They sent me a hop up kit instead of a bottom bracket kit/set same as this one

http://www.winstanleysbmx.com/product/52049/Profile_HopUp_Kit_Ex_Display

I just rang them and they said the kit above is missing the axle spacer tube otherwise it's the same as the bottom bracket kit below

http://www.winstanleysbmx.com/product/24110/Profile_USA_Bottom_Bracket_Kit

Is this right $:-\$

He also said I mght need to use a smaller spacer washer to add to the tube make sure it is flush against the cups inside the BB, I thought american BB's where all the same dimensions $:-\$

gavprimo · « **Reply #20 on:** July 07, 2012, 11:42 AM »

[/quote]

Got plenty sprocket bolts and crank bolts if anyone needs any

[/quote]

OOH, I need a new sprocket bolt for my profiles - pm'd you

Dannywhac · « **Reply #21 on:** July 07, 2012, 11:53 AM »

Quote from: rodriguez on July 07, 2012, 11:38 AM

Mine arrived yesterday as well all good I got a chrome set well nearly.

They sent me a hop up kit instead of a bottom bracket kit/set same as this one

http://www.winstanleysbmx.com/product/52049/Profile_HopUp_Kit_Ex_Display

I just rang them and they said the kit above is missing the axle spacer tube otherwise it's the same as the bottom bracket kit below

http://www.winstanleysbmx.com/product/24110/Profile_USA_Bottom_Bracket_Kit

Is this right $:-\$

He also said I mght need to use a smaller spacer washer to add to the tube make sure it is flush against the cups inside the BB, I thought american BB's where all the same dimensions $:-\$

The hop-up kits a bit nicer than the standard BB set - you get flush bolts and them nice machined external spacers. US BB's widths vary from frame to frame, so yeah, you might need to use one of the thin spacers to make sure the axle spacer touches both bearings.

Someone scanned the Profile install guide over at the museum - you need the non-drive side cup to 'stick out' a couple of mm:

http://bmxmuseum.com/forums/viewtopic.php?id=209023

rooski · « **Reply #22 on:** July 07, 2012, 12:04 PM »

Quote from: gavprimo on July 07, 2012, 11:42 AM

Got plenty sprocket bolts and crank bolts if anyone needs any

[/quote]

OOH, I need a new sprocket bolt for my profiles - pm'd you

[/quote]

Rodgy1970 · « **Reply #23 on:** July 07, 2012, 12:08 PM »

Quote from: dannywhac on July 07, 2012, 11:53 AM

Quote from: rodriguez on July 07, 2012, 11:38 AM
Mine arrived yesterday as well all good I got a chrome set well nearly.

They sent me a hop up kit instead of a bottom bracket kit/set same as this one

http://www.winstanleysbmx.com/product/52049/Profile_HopUp_Kit_Ex_Display

I just rang them and they said the kit above is missing the axle spacer tube otherwise it's the same as the bottom bracket kit below

http://www.winstanleysbmx.com/product/24110/Profile_USA_Bottom_Bracket_Kit

Is this right $:-\$

He also said I mght need to use a smaller spacer washer to add to the tube make sure it is flush against the cups inside the BB, I thought american BB's where all the same dimensions $:-\$

The hop-up kits a bit nicer than the standard BB set - you get flush bolts and them nice machined external spacers. US BB's widths vary from frame to frame, so yeah, you might need to use one of the thin spacers to make sure the axle spacer touches both bearings.

Someone scanned the Profile install guide over at the museum - you need the non-drive side cup to 'stick out' a couple of mm:

http://bmxmuseum.com/forums/viewtopic.php?id=209023

Cheers Danny, couldn't find instructions on the profile site for american BB installation.

This kit didn't come with any bolts though $:-\$

Dannywhac · « **Reply #24 on:** July 07, 2012, 12:24 PM »

Quote from: rodriguez on July 07, 2012, 12:08 PM

Cheers Danny, couldn't find instructions on the profile site for american BB installation.

This kit didn't come with any bolts though $:-\$

That's a pain (and typical of old W@nkstanleys) - this is what you should get in a hop-up kit:

http://www.amazon.co.uk/Profile-American-Bearings-Spacers-Spindle/dp/B001GSSKE8

Author Topic: fancy some new 175mm profiles or a set of ss profiles? (Read 7349 times)

phatjimmy

Rob1

thecaptain

HEYWOOD BMX

Mdbh

Rob1

Rodgy1970

Rodgy1970