Very good stripper.

[kungfunky]

Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace 
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  Ohh and


the gunk was on for around 3 mins at this stage.

[stidds]

That is what I use too Ash, it will even remove some powdercoat.

[dordymush]

is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much 

[stidds]

is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much 

Cost me a fiver from local car paint suppliers.

[kungfunky]

Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids 

[bobbbbsy]

carb cleaner removes powder coat !

[jT Racing]

i am jack's dissapointment at thread content




i used nitromoors the other week and it worked fine. problem is i needed that thick a layer it used more than £17 worth to strip a frame. i'll be happy if this works because i've got 2 more to do.

[kungfunky]

Worked fine for me on a powdered alloy frame John, not tried it on any other material yet though.

[Andy68]

Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids 

Protective glasses too!!!     Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!

[kungfunky]

Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids 

Protective glasses too!!!     Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!

your one eye ? 

[superbikedan]

Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace 
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  Ohh and


the gunk was on for around 3 mins at this stage.

ash get with the programe   i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good

[kungfunky]

Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace 
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  Ohh and


the gunk was on for around 3 mins at this stage.

ash get with the programe   i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good

we're still in 1986 right Dan 

[keviboy]

Woody told me to use 'MR MUSCLE" spray on a set of SE cranks 30mins later it just feel off thick nasty black paint the rest wiped off   put the cranks in a carrier bag smothered them in MR MUSCLE rolled them up in the bag and hey presto! rises off in hot tap water and dried them, polish up on a lath with a buffer and buff in compound.job done not mirror finish as didn't have rouge polish.