gfxgfx
 
logo
 
gfx gfx
gfx
975791 Posts in 138942 Topics by 6363 Members - Latest Member: Bmxflex November 11, 2024, 05:34 AM
*
gfx* Home | Portal | Forum | Merchandise | Help | Login | Register | gfx
gfx
RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Very good stripper.
gfx
gfxgfx
 

Author Topic: Very good stripper.  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Very good stripper.
« on: June 03, 2012, 07:56 PM »
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace  :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  :daumenhoch: Ohh and


the gunk was on for around 3 mins at this stage.

WANTED....FRED BLOOD QUADANGLE FRAME..

Offline stidds

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Very good stripper.
« Reply #1 on: June 03, 2012, 07:59 PM »
That is what I use too Ash, it will even remove some powdercoat.

Offline dordymush

  • Berm Worm
  • ***********
  • Posts: 10464
  • Rated:
Re: Very good stripper.
« Reply #2 on: June 03, 2012, 08:01 PM »
is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much  ;D
dave the bmxing gypo


Offline stidds

  • Site Supporter
  • My life is Radbmx
  • *
  • Posts: I am a geek!!
  • Rated:
Re: Very good stripper.
« Reply #3 on: June 03, 2012, 08:02 PM »
is that the stuff that costs £25 a tub.
i think dan told me about that stuff but i was too cheap to spend that much  ;D

Cost me a fiver from local car paint suppliers.

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Re: Very good stripper.
« Reply #4 on: June 03, 2012, 08:10 PM »
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids  :daumenhoch:
WANTED....FRED BLOOD QUADANGLE FRAME..

Offline bobbbbsy

  • 900 Air
  • ********
  • Posts: 3634
  • Rated:
Re: Very good stripper.
« Reply #5 on: June 03, 2012, 08:12 PM »
carb cleaner removes powder coat !

Offline jT Racing

  • BMX Overlord
  • ***********
  • Posts: 17338
  • i like bikes. :/
  • Rated:
Re: Very good stripper.
« Reply #6 on: June 03, 2012, 08:37 PM »
i am jack's dissapointment at thread content :-\




i used nitromoors the other week and it worked fine. problem is i needed that thick a layer it used more than £17 worth to strip a frame. i'll be happy if this works because i've got 2 more to do.
ding dong

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Re: Very good stripper.
« Reply #7 on: June 03, 2012, 08:52 PM »
Worked fine for me on a powdered alloy frame John, not tried it on any other material yet though.
WANTED....FRED BLOOD QUADANGLE FRAME..

Offline Andy68

  • Site Supporter
  • 540 Air
  • *
  • Posts: 2378
  • Rated:
Re: Very good stripper.
« Reply #8 on: June 03, 2012, 09:40 PM »
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids  :daumenhoch:

Protective glasses too!!!  :LolLolLolLol:   Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Re: Very good stripper.
« Reply #9 on: June 03, 2012, 09:46 PM »
Yeah it's not that costly but does the trick..and as with all these things it burns like fook. Wear gloves kids  :daumenhoch:

Protective glasses too!!!  :LolLolLolLol:   Specialists thought I was gonna lose the sight in one eye a few yrs ago, ouch!!!

your one eye ?  ???
WANTED....FRED BLOOD QUADANGLE FRAME..

Offline superbikedan

  • BMX Legend
  • 900 Air
  • *
  • Posts: 3819
  • Rated:
Re: Very good stripper.
« Reply #10 on: June 03, 2012, 09:54 PM »
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace  :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  :daumenhoch: Ohh and


the gunk was on for around 3 mins at this stage.



ash get with the programe   i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good :daumenhoch:
For powder coating drop me a pm

Offline kungfunky

  • Team Moderator
  • Tail Whip
  • *
  • Posts: 5901
  • Rated:
Re: Very good stripper.
« Reply #11 on: June 04, 2012, 08:15 AM »
Seeing as Nitromors does'nt cut the mustard these days I went out hunting for a new stripper and found this one, and it's ace  :daumenhoch:
Gave it a try on some alloy bars and it stripped the paint in no time and did a Ripper frame yesterday and the old powder came off no problems at all  :daumenhoch: Ohh and


the gunk was on for around 3 mins at this stage.



ash get with the programe   i've been promoting this stuff for a few years now, apart from liquid strip it's
all i use and it really is good :daumenhoch:

we're still in 1986 right Dan  ::) ;D
WANTED....FRED BLOOD QUADANGLE FRAME..

keviboy

  • Guest
Re: Very good stripper.
« Reply #12 on: June 07, 2012, 05:54 PM »
Woody told me to use 'MR MUSCLE" spray on a set of SE cranks 30mins later it just feel off thick nasty black paint the rest wiped off   put the cranks in a carrier bag smothered them in MR MUSCLE rolled them up in the bag and hey presto! rises off in hot tap water and dried them, polish up on a lath with a buffer and buff in compound.job done not mirror finish as didn't have rouge polish.

RADBMX.CO.UK  |  Technical & Reference Section  |  Tech and Restoration  |  Very good stripper.
 

gfxgfx
gfx gfx
Powered by MySQL Powered by PHP Valid XHTML 1.0! Valid CSS!
SimplePortal 2.3.5 © 2008-2012, SimplePortal