** May BOTM Vote off **

[pickle]

Get you May builds in.....4 pics max and a parts run down always helps  

[stillriding]

ok lets see;
all the following parts are nos
Haro Kneesavers Ame grips Fusion levers
Odyssey Gyro
Bulldog fs front brake
Fusion seat
Fusion seat clamp
Fusion seat post
Fusion mini stem
Odyssey Pitbull rear brake
Fusion DX pedals
Fusion opc
YST BB
Fusion chain wheel
Alex rims with SE hubs
the frame was fooked and it had Fishbone forks so i replaced the forks with nos '94 Maga forks and as you can see powdercoated the frame
hope you like it as much as i do

[Gish]

REVCORE CRUISER

88 revcore cruiser f&F
dk pro xl stem
boss cruiser bars
odi lock on grips
s&m slim seat
primo seatpost
pmc seatclamp
redline cranks
izumi chain
odyssey triple trap pedals with c.p cages
odyssey pitbull II caliper & lever
alex supra rims
kenda tyres

[kev-s]

here goes nothing!!

spec is

wtp bars (fooking heavy)
s&m sharp edged gyro unfriendly redneck
gt forks
odyssey jepg pegs
alex supra b front wheel (kindly donated by egg)
primo comet tyre

[meticulous]

bob haro's ET kuwi' rider...

ukai's on suntour
irc tyres
tagaki opc
ogk grips
1020 with pre-bent
nogaku seat post....


all as it should be.....

[AKGOFF]

Didn't get this finished in time for April so here it is finally finished:

80 / 81 Torker Mini Frameset powdered by who else but SBD
Decals by Del, slightly later decals than the frame but I wanted red in them.
NOS MCS Mini Bars
NOS AME Mini Dual grips, another amazing deal from Gaz Poolysheriff
NOS DC Tech 3
NOS DC Cable dated 80
NOS DC 730
Scott Mathauser Pads
Mini Pro Neck
NOS Mini UNI Seat
155mm Bullseye 2nd Gen Cranks with Bullseye spider
40 Tooth Pro Neck Chainring
OG Hutch Mini pedals with OG cages
Shimano SF30 Freewheel
Izumi Chain
NOS Araya 20 x 1 3/8 Rims
NOS Bullseye Hubs
NOS Blue / Yellow label Comp lll Tyres






It was built by me if that gets me more votes...............if not I'll tell the truth and let you all know Steve built it for me because I'm stupid. 

Adam

[Tidelander]

OK, first timer. Hope you like 

1983 Redline PL-20 restored and re-chromed, built up with a mix of restored  and NOS parts (with a couple of re-issue / repro parts)









Frame: Redline PL-20
Fork: Redline
Bars: Redline Stu Thomsen STR Series Bars
Stem: Redline Forklifter
Steatpost: Renthal
Seat: Elina Lightning Bolt
Seatpost Clamp: Suntour
Crank: Redline Flight Cranks
Chainring: Redline
Pedals: Repro Bear Trap
Rims: Ukai (20x1.75) with Suzue hubs
Tires: Tioga Comp III
Brake: Dia Compe MX 901
Grips: A'me

[markyp]

a rare beast indeed,1984 cw Pistol Pete in survivor chrome.90% factory spec

PARTS LIST

84 CW pistol pete frameset
cw pro bars
pro neck stem
beartrap 2 headset
araya 7x laced to suzue hubs
shimano sx pedals
shimano tourney claiper with dx lever and shimano cable
uni pro seat
tange seat clamp
tuf neck power disc with tuf neck ring
sugino crank
reissiue comp 3 tyres
reissue pads
repro decal
ame tri bubble font

[renegaderacer]

There are so many top class, gorgeous builds this month, I thought it was about time I lower the tone and present my Falcon Pro Aero Flyer for your viewing pleasure!  

The specs are (as far as I can rememebr!):

* 1983 Falcon Pro Areo Flyer frame and forks in survivor condition
* Custom Areo Flyer decals by Del
* Beartrap II headset
* NOS Tioga SB220 sealed bottom bracket
* NOS Pro-Landar hollow tubular crank
* GT Pro Bars
* Self designed pads (got proper custom ones on the way)
* Stem pad converted by me to take two brake cables for the Rotor, like the Skyway pads
* AME round blue and red grips
* NOS Blue Tech 4 MX123 left hand lever
* Restored Red Tech 4 MX124 right hand lever
* NOS red and blue KKT AMX pedals
* Restored ACS stem
* NOS ACS Rotor
* Red and blue brake cables
* NOS Dia Compe cable guides
* YBN red and blue chain spliced together
* NOS Takagi chainring
* Red chainring bolts
* Red and blue re-pop MX seat clamps joined together by Sawzall
* NOS Shimano freewheel
* NOS Meng Jing layback seatpost
* Kashi Aero fake seat
* NOS Raleigh 1020 blue caliper
* Restored Raleigh 1020 red caliper
* NOS Vans brake blocks
* Raleigh Burner frame protectors on back brake
* Custom Falcon Pro dice dust caps
* GT hubs originally on my Badlander, re-chromed with powdered flanges by SBD and new decals by Del
* Early Sun Mistral rims restored and powdered red and blue by SBD with decals by Del
* Wheels rebuilt with red and blue spokes
* Duro Comp ST tyres
* Old school chain adjusters
* Belvin pegs






Hope it hasn't offended you too much!!  

Thanks to everyone who's helped make this happen!  

If I haven't bored you already you may like to look through the build process!

http://www.radbmx.co.uk/forum/index.php'topic=140833.0
http://www.radbmx.co.uk/forum/index.php'topic=140588.0
http://www.radbmx.co.uk/forum/index.php'topic=140703.0

Cheers,

Giles

[rad_pitt]

I'll chuck this in cheers to anyone I've had parts off for this - it took a while to bring together, hope it came out okay    

  My Vincent Air Zone Freestyler  

Vincent Air Zone F/F
Kashimax Aero seat
Tuf Neck stem w/ potts mod
Dia Compe MX hinged seat clamp
Ukai Sppedlines laced to blue Suzue sealed bearing hubs
Blue Shimano SX pedals
NOS Tioga Comp Pool tyres
Blue MX brakes w/ Polished DC Tech 3's & NOS Tioga brake tamers
NOS white DC cables
Sugino OPC
NOS Tioga power disc
NOS Blue 43t Sugino chainring w/ Suntour bolts
Green/ Silver Izumi chain
A'me cam grips
Hsin Lung bars
Tange 320 headset w/ Blue Tange loose proof lock nut









Original thread can be found here:

http://www.radbmx.co.uk/forum/index.php'topic=144148.0

Cheers,
Tom 

[Dark Diggler]

Due to unforseen circumstance the Fooker has now become the Kripper and had a makeover with absolutely no era correct parts whatsoever, unfortunately some of them are quality parts that actually work
Get yer votes in 

[Andy68]

Wot the hell, never entered a bike before so here goes......

'82 GT Junior:

20x1 3/8 Arayas, Suzue hubs, Shimano 16T freewheel
NOS Yellow label Mitsuboshi Comp 3's
150mm TA crank, 40T TA chainwheel
TTK pedals
Izumi chain
Early square corner DK mini stem, mini Powerlight bars, A'me mini grips
Shimano DX lever, Weinmann 730 caliper, DC tan blocks
Uni mini seat & DK 7/8th clamp.

[pickle]

Voting now open guys! 

[In2 bmx]

Voted  .. Tough again this month ...

[kungfunky]

Done 

[rollin72]

votes in, some nice builds..but 1 stands out out above the rest for me..the Oldham ruffyed

[Julian347]

Great builds and a good variation of styles. 

One really stood out for me though.

[chubby]

again lovely bikes this month but only one does it for me........

[kalex]

my vote is in, been said before all well turned out bikes but there's one that ticks my box

[pickle]

One does seem to be running away with it 

[griff]

done 

[hunterdubber]

Easy 

[TORKER mick]

done good luck everyone

[Darren KAP]

  simples     

[animal]

  simples     

X2