Author Topic: Oxalic Acid - another ? - How long do I leave it in for? (Read 875 times)

BMX1973 · « **on:** April 28, 2012, 12:05 PM »

Going to fill a dustbin (not wheelie bin) how many grames of Oxalic powder will I need roughly. Probably have to do 2/3rds of frame then turn it around ?

stidds · « **Reply #1 on:** April 28, 2012, 06:05 PM »

Dave

I have never measured it to be honest, just threw a load in and then soaked the frame in it.

Rodgy1970 · « **Reply #2 on:** April 29, 2012, 07:43 AM »

I used about 450g of OA powder in about 30l (with the ballast)

Old drawer and some heavy plastic made a far better container, I was going to use the sandpit it was it but it was huge, so set the drawer inside incase it collapsed.

BMX1973 · « **Reply #3 on:** April 29, 2012, 12:19 PM »

Thanks Stidds & rodriguez.

Good idea with the ballast, I have some old 5ltr bottles I can chuck in to make a stronger mix.

Quote from: rodriguez on April 29, 2012, 07:43 AM

I used about 450g of OA powder in about 30l (with the ballast)

Old drawer and some heavy plastic made a far better container, I was going to use the sandpit it was it but it was huge, so set the drawer inside incase it collapsed.

jT Racing · « **Reply #4 on:** April 29, 2012, 03:58 PM »

Dave mate, get a box just big enough, line it with a split open bin bag and wrap some brown tape round the whole thing for support. A 300L wheeliebin sounds but much.

BMX1973 · « **Reply #5 on:** May 03, 2012, 03:00 PM »

Got my Acid

How much do I take

OOPS

I mean how long do I leave parts etc in it for?

Rodgy1970 · « **Reply #6 on:** May 03, 2012, 07:46 PM »

24 hrs, it's at it's strongest during the first 24 hrs which is usually long enough.

When you take the parts out rinse them down well, not with fairy liquid mind it just makes metal rust.